Publications 2021
Abrishami, A.; Eslami, V.; Baharvand, Z.; Khalili, N.; Saghamanesh, S.; Zarei, E.; Sanei-Taheri, M. Epicardial adipose tissue, inflammatory biomarkers and COVID-19: is there a possible relationship? Int. Immunopharmacol. 2021, 90, 107174 (8 pp.). https://doi.org/10.1016/j.intimp.2020.107174
Bagheri, M.; Lothenbach, B.; Shakoorioskooie, M.; Leemann, A.; Scrivener, K. Use of scratch tracking method to study the dissolution of alpine aggregates subject to alkali silica reaction. Cem. Concr. Compos. 2021, 124, 104260 (11 pp.). https://doi.org/10.1016/j.cemconcomp.2021.104260
Balogh-Michels, Z.; Stevanovic, I.; Borzi, A.; Bächli, A.; Schachtler, D.; Gischkat, T.; Neels, A.; Stuck, A.; Botha, R. Crystallization behavior of ion beam sputtered HfO2 thin films and its effect on the laser-induced damage threshold. J. Eur. Opt. Soc. Rapid Publ. 2021, 17 (1), 3 (8 pp.). https://doi.org/10.1186/s41476-021-00147-w
Bleiziffer, P.; Hofmann, J.; Zboray, R.; Wiege, T.; Herger, R. Predicting the fiber orientation in glass fiber reinforced polymers using the moment of inertia and convolutional neural networks. Eng. Appl. Artif. Intell. 2021, 104, 104351 (12 pp.). https://doi.org/10.1016/j.engappai.2021.104351
Borzì, A.; Zboray, R.; Dolabella, S.; Le Neal, J. F.; Drljaca, P.; Fiorucci, G.; Dommann, A.; Neels, A. A holistic X-ray analytical approach to support sensor design and fabrication: strain and cracking analysis for wafer bonding processes. Mater. Des. 2021, 210, 110052 (9 pp.). https://doi.org/10.1016/j.matdes.2021.110052
Boström, H. L. B.; Collings, I. E.; Daisenberger, D.; Ridley, C. J.; Funnell, N. P.; Cairns, A. B. Probing the influence of defects, hydration, and composition on Prussian blue analogues with pressure. J. Am. Chem. Soc. 2021, 143 (9), 3544-3554. https://doi.org/10.1021/jacs.0c13181
Burley, L. G.; Beecham-Lonsdale, J. H.; Srivastava, A. K.; Collings, I. E.; Saines, P. J. Enhancing the chemical flexibility of hybrid perovskites by introducing divalent ligands. Dalton Trans. 2021, 50 (16), 5437-5441. https://doi.org/10.1039/d1dt00878a
Cancellieri, C.; Ariosa, D.; Druzhinin, A. V.; Unutulmazsoy, Y.; Neels, A.; Jeurgens, L. P. H. Strain depth profiles in thin films extracted from in-plane X-ray diffraction. J. Appl. Crystallogr. 2021, 54, 87-98. https://doi.org/10.1107/S1600576720014843
Chen, Y.; Parrilli, A.; Jaedig, F.; Fuhrmann, A.; Staedeli, C.; Fischer, P.; Windhab, E. J. Micro-computed tomography study on bread dehydration and structural changes during ambient storage. J. Food Eng. 2021, 296, 110462 (10 pp.). https://doi.org/10.1016/j.jfoodeng.2020.110462
Collings, I. E. Impact of synchrotron X-ray radiation damage on a molecular ferroelectric crystal. Acta Crystallogr. B 2021, 77, 307-308. https://doi.org/10.1107/S2052520621005138
Cucchi, A.; Vignudelli, E.; Sartori, M.; Parrilli, A.; Nicoli Aldini, N.; Corinaldesi, G. A microcomputed tomography analysis of bone tissue after vertical ridge augmentation with non-resorbable membranes versus resorbable membranes and titanium mesh in humans. Int. J. Oral Implantol. 2021, 14 (1), 25-38. https://www.quintessence-publishing.com/deu/en/article/1072481/
Dolabella, S.; Borzì, A.; Dommann, A.; Neels, A. Lattice strain and defects analysis in nanostructured semiconductor materials and devices by high-resolution X-ray diffraction: theoretical and practical aspects. Small Methods 2021, 6 (2), 2100932 (31 pp.). https://doi.org/10.1002/smtd.202100932
Fiorentino, G.; Parrilli, A.; Garagna, S.; Zuccotti, M. Three-dimensional imaging and reconstruction of the whole ovary and testis: a new frontier for the reproductive scientist. Mol. Hum. Reprod. 2021, 27 (3), gaab007 (11 pp.). https://doi.org/10.1093/molehr/gaab007
Fourmann, O.; Hausmann, M. K.; Neels, A.; Schubert, M.; Nyström, G.; Zimmermann, T.; Siqueira, G. 3D printing of shape-morphing and antibacterial anisotropic nanocellulose hydrogels. Carbohydr. Polym. 2021, 259, 117716 (11 pp.). https://doi.org/10.1016/j.carbpol.2021.117716
Gantenbein, S.; Mascolo, C.; Houriet, C.; Zboray, R.; Neels, A.; Masania, K.; Studart, A. R. Spin-printing of liquid crystal polymer into recyclable and strong all-fiber materials. Adv. Funct. Mater. 2021, 31 (52), 2104574 (10 pp.). https://doi.org/10.1002/adfm.202104574
Geng, G.; Barbotin, S.; Shakoorioskooie, M.; Shi, Z.; Leemann, A.; Sanchez, D. F.; Grolimund, D.; Wieland, E.; Dähn, R. An in-situ 3D micro-XRD investigation of water uptake by alkali-silica-reaction (ASR) product. Cem. Concr. Res. 2021, 141, 106331 (8 pp.). https://doi.org/10.1016/j.cemconres.2020.106331
Giovannini, G.; Garoli, D.; Rupper, P.; Neels, A.; Rossi, R. M.; Boesel, L. F. Metal‐modified montmorillonite as plasmonic microstructure for direct protein detection. Sensors 2021, 21 (8), 2655 (16 pp.). https://doi.org/10.3390/s21082655
Grassi, A.; Dal Fabbro, G.; Fini, M.; Zaffagnini, S.; Parrilli, A. Case report: anterior cruciate ligament calcification in a patient with chondrocalcinosis: micro-computed tomography presentation. Front. Surg. 2021, 8, 680234 (6 pp.). https://doi.org/10.3389/fsurg.2021.680234
Guńka, P. A.; Olejniczak, A.; Fanetti, S.; Bini, R.; Collings, I. E.; Svitlyk, V.; Dziubek, K. F. Crystal structure and non-hydrostatic stress-induced phase transition of urotropine under high pressure. Chem. Eur. J. 2021, 27 (3), 1094-1102. https://doi.org/10.1002/chem.202003928
Heidarloo, N.; Aghamiri, S. M. R.; Saghamanesh, S.; Azma, Z.; Alaei, P. Generation of material‐specific energy deposition kernels for kilovoltage x‐ray dose calculations. Med. Phys. 2021, 48 (9), 5423-5439. https://doi.org/10.1002/mp.15061
Horio, M.; Wang, Q.; Granata, V.; Kramer, K. P.; Sassa, Y.; Jöhr, S.; Sutter, D.; Bold, A.; Das, L.; Xu, Y.; et al. Electronic reconstruction forming a C2-symmetric Dirac semimetal in Ca3Ru2O7. npj Quantum Mater. 2021, 6 (1), 29 (7 pp.). https://doi.org/10.1038/s41535-021-00328-3
Kochetkova, T.; Peruzzi, C.; Braun, O.; Overbeck, J.; Maurya, A. K.; Neels, A.; Calame, M.; Michler, J.; Zysset, P.; Schwiedrzik, J. Combining polarized Raman spectroscopy and micropillar compression to study microscale structure-property relationships in mineralized tissues. Acta Biomater. 2021, 119, 390-404. https://doi.org/10.1016/j.actbio.2020.10.034
Kon, E.; Salamanna, F.; Filardo, G.; Di Matteo, B.; Shabshin, N.; Shani, J.; Fini, M.; Perdisa, F.; Parrilli, A.; Sprio, S.; et al. Bone regeneration in load-bearing segmental defects, guided by biomorphic, hierarchically structured apatitic scaffold. Frontiers Bioeng. Biotechnol. 2021, 9, 734486 (16 pp.). https://doi.org/10.3389/fbioe.2021.734486
Lamy-Mendes, A.; Malfait, W. J.; Sadeghpour, A.; Girão, A. V.; Silva, R. F.; Durães, L. Influence of 1D and 2D carbon nanostructures in silica-based aerogels. Carbon 2021, 180, 146-162. https://doi.org/10.1016/j.carbon.2021.05.004
Leemann, A.; Bagheri, M.; Lothenbach, B.; Scrivener, K.; Barbotin, S.; Boehm-Courjault, E.; Geng, G.; Dähn, R.; Shi, Z.; Shakoorioskooie, M.; et al. Alkali-silica reaction – a multidisciplinary approach. RILEM Tech. Lett. 2021, 6, 169-187. https://doi.org/10.21809/rilemtechlett.2021.151
Liebi, M.; Lutz-Bueno, V.; Guizar-Sicairos, M.; Schönbauer, B. M.; Eichler, J.; Martinelli, E.; Löffler, J. F.; Weinberg, A.; Lichtenegger, H.; Grünewald, T. A. 3D nanoscale analysis of bone healing around degrading Mg implants evaluated by X-ray scattering tensor tomography. Acta Biomater. 2021, 134, 804-817. https://doi.org/10.1016/j.actbio.2021.07.060
Liu, T.; Zboray, R.; Trtik, P.; Wang, L. P. Optical flow method for neutron radiography flow diagnostics. Phys. Fluids 2021, 33 (10), 101702 (6 pp.). https://doi.org/10.1063/5.0063836
M., T. O.; Sakar, B.; Oztoprak, I.; Balogh-Michels, Z.; Neels, A.; Ozturk, O. Structural and morphological effect of Ti underlayer on Pt/Co/Pt magnetic ultrathin film. Japanese J. Appl. Phys. 2021, 60 (10), 105505 (7 pp.). https://doi.org/10.35848/1347-4065/ac25ce
Malagurski, I.; Frison, R.; Maurya, A. K.; Neels, A.; Andjelkovic, B.; Senthamaraikannan, R.; Babu, R. P.; O'Connor, K. E.; Witko, T.; Solarz, D.; et al. Polyhydroxyoctanoate films reinforced with titanium dioxide microfibers for biomedical application. Mater. Lett. 2021, 285, 129100 (5 pp.). https://doi.org/10.1016/j.matlet.2020.129100
Maurya, A. K.; Mandal, S.; Wheeldon, D. E.; Schoeller, J.; Schmid, M.; Annaheim, S.; Camenzind, M.; Fortunato, G.; Dommann, A.; Neels, A.; et al. Effect of radiant heat exposure on structure and mechanical properties of thermal protective fabrics. Polymer 2021, 222, 123634 (11 pp.). https://doi.org/10.1016/j.polymer.2021.123634
Maurya, A. K.; Parrilli, A.; Kochetkova, T.; Schwiedrzik, J.; Dommann, A.; Neels, A. Multiscale and multimodal X-ray analysis: quantifying phase orientation and morphology of mineralized turkey leg tendons. Acta Biomater. 2021, 129, 169-177. https://doi.org/10.1016/j.actbio.2021.05.022
Medinger, J.; Nedyalkova, M.; Furlan, M.; Lüthi, T.; Hofmann, J.; Neels, A.; Lattuada, M. Preparation and machine-learning methods of nacre-like composites from the self-assembly of magnetic colloids exposed to rotating magnetic fields. ACS Appl. Mater. Interfaces 2021, 13 (40), 48040-48052. https://doi.org/10.1021/acsami.1c13324
Parida, D.; Moreau, E.; Nazir, R.; Salmeia, K. A.; Frison, R.; Zhao, R.; Lehner, S.; Jovic, M.; Gaan, S. Smart hydrogel-microsphere embedded silver nanoparticle catalyst with high activity and selectivity for the reduction of 4-nitrophenol and azo dyes. J. Hazard. Mater. 2021, 416, 126237 (10 pp.). https://doi.org/10.1016/j.jhazmat.2021.126237
Parida, D.; Salmeia, K. A.; Sadeghpour, A.; Zhao, S.; Maurya, A. K.; Assaf, K. I.; Moreau, E.; Pauer, R.; Lehner, S.; Jovic, M.; et al. Template-free synthesis of hybrid silica nanoparticle with functionalized mesostructure for efficient methylene blue removal. Mater. Des. 2021, 201, 109494 (10 pp.). https://doi.org/10.1016/j.matdes.2021.109494
Perret, E.; Hufenus, R. Insights into strain-induced solid mesophases in melt-spun polymer fibers. Polymer 2021, 229, 124010 (18 pp.). https://doi.org/10.1016/j.polymer.2021.124010
Perret, E.; Sharma, K.; Tritsch, S.; Hufenus, R. Reversible mesophase in stress-annealed poly(3-hydroxybutyrate) fibers: a synchrotron x-ray and polarized ATR-FTIR study. Polymer 2021, 231, 124141 (12 pp.). https://doi.org/10.1016/j.polymer.2021.124141
Perret, E.; Sharma, K.; Tritsch, S.; Hufenus, R. WAXD, polarized ATR-FTIR and DSC data of stress-annealed poly(3-hydroxybutyrate) fibers. Data Brief 2021, 39, 107523 (19 pp.). https://doi.org/10.1016/j.dib.2021.107523
Rodriguez-Palomo, A.; Lutz-Bueno, V.; Guizar-Sicairos, M.; Kádár, R.; Andersson, M.; Liebi, M. Nanostructure and anisotropy of 3D printed lyotropic liquid crystals studied by scattering and birefringence imaging. Addit. Manuf. 2021, 47, 102289 (9 pp.). https://doi.org/10.1016/j.addma.2021.102289
Rodriguez‐Palomo, A.; Lutz‐Bueno, V.; Cao, X.; Kádár, R.; Andersson, M.; Liebi, M. In situ visualization of the structural evolution and alignment of lyotropic liquid crystals in confined flow. Small 2021, 17 (7), 2006229 (10 pp.). https://doi.org/10.1002/smll.202006229
Saghamanesh, S.; Zboray, R. Virtual speckle-based X-ray phase-contrast and dark-field imaging with digital phantoms. Opt. Express 2021, 29 (25), 41703-41718. https://doi.org/10.1364/OE.444562
Salmeia, K. A.; Dolabella, S.; Parida, D.; Frankcombe, T. J.; Afaneh, A. T.; Cordova, K. E.; Al-Maythalony, B.; Zhao, S.; Civioc, R.; Marashdeh, A.; et al. Robust barium phosphonate metal–organic frameworks synthesized under aqueous conditions. ACS Mater. Lett. 2021, 3, 1010-1015. https://doi.org/10.1021/acsmaterialslett.1c00275
Shakoorioskooie, M.; Griffa, M.; Leemann, A.; Zboray, R.; Lura, P. Alkali-silica reaction products and cracks: X-ray micro-tomography-based analysis of their spatial-temporal evolution at a mesoscale. Cem. Concr. Res. 2021, 150, 106593 (16 pp.). https://doi.org/10.1016/j.cemconres.2021.106593
Shakoorioskooie, M.; Griffa, M.; Leemann, A.; Zboray, R.; Lura, P. Evolution of alkali-silica reaction cracks and products in concrete at the meso-scale studied by X-ray micro-tomography. In Proceedings of the 16th international conference on alkali-aggregate reaction in concrete, presented at the 16th international conference on alkali-aggregate reaction in concrete, Lisboa, Portugal, May 31 - June 2, 2022; Lopes Batista, A., Santos Silva, A., Fernandes, I., Oliveira Santos, L., Custódio, J., Serra, C., Eds.; Laboratório Nacional de Engenharia Civil: Lisboa, 2021; Vol. 1, pp 1151-1162.
Shakoorioskooie, M. The alkali-silica reaction damage in concrete at the mesoscale: characterization by X-ray tomography. Doctoral dissertation, ETH Zurich, Zurich, 2021, 346 p. https://doi.org/10.3929/ethz-b-000521942
Sharma, K.; Braun, O.; Tritsch, S.; Muff, R.; Hufenus, R.; Perret, E. 2D Raman, ATR-FTIR, WAXD, SAXS and DSC data of PET mono- and PET/PA6 bicomponent filaments. Data Brief 2021, 38, 107416 (24 pp.). https://doi.org/10.1016/j.dib.2021.107416
Sohrabi, N.; Jhabvala, J.; Kurtuldu, G.; Frison, R.; Parrilli, A.; Stoica, M.; Neels, A.; Löffler, J. F.; Logé, R. E. Additive manufacturing of a precious bulk metallic glass. Appl. Mater. Today 2021, 24, 101080 (16 pp.). https://doi.org/10.1016/j.apmt.2021.101080
Sohrabi, N.; Jhabvala, J.; Kurtuldu, G.; Stoica, M.; Parrilli, A.; Berns, S.; Polatidis, E.; Van Petegem, S.; Hugon, S.; Neels, A.; et al. Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion. Mater. Des. 2021, 199, 109400 (14 pp.). https://doi.org/10.1016/j.matdes.2020.109400
Sohrabi, N.; Hamidi-Nasab, M.; Rouxel, B.; Jhabvala, J.; Parrilli, A.; Vedani, M.; Logé, R. E. Fatigue performance of an additively manufactured zr-based bulk metallic glass and the effect of post-processing. Metals 2021, 11 (7), 1064 (19 pp.). https://doi.org/10.3390/met11071064
Sohrabi, N.; Parrilli, A.; Jhabvala, J.; Neels, A.; Logé, R. E. Tensile and impact toughness properties of a Zr-based bulk metallic glass fabricated via laser powder-bed fusion. Materials 2021, 14 (19), 5627 (16 pp.). https://doi.org/10.3390/ma14195627
Szmyt, W.; Geler-Kremer, J.; Borzì, A.; Abel, S.; Fompeyrine, J.; Hoffmann, P. High vacuum chemical vapor deposition of BaTiO3 films for integrated photonic devices. Presented at the Department day: advanced materials and surfaces, Dübendorf, CH, September 15, 2021.
Tschon, M.; Brogini, S.; Parrilli, A.; Bertoldi, S.; Silini, A.; Parolini, O.; Faré, S.; Martini, L.; Veronesi, F.; Fini, M.; et al. Assessment of the in vivo biofunctionality of a biomimetic hybrid scaffold for osteochondral tissue regeneration. Biotechnol. Bioeng. 2021, 118 (1), 465-480. https://doi.org/10.1002/bit.27584
Yıldırım, O.; Borzì, A.; Falub, C. V.; Rohrmann, H.; Jaeger, D.; Rechsteiner, M.; Schneider, D.; Neels, A.; Hug, H. J.; Marioni, M. A. Tuning the microstructure of the Pt layers grown on Al2O3 (0001) by different sputtering methods. Scr. Mater. 2021, 194, 113689 (5 pp.). https://doi.org/10.1016/j.scriptamat.2020.113689
Zboray, R. Optimizing and applying high‐resolution, in‐line laboratory phase‐contrast X‐ray imaging for low‐density material samples. J. Microsc. 2021, 282 (2), 123-135. https://doi.org/10.1111/jmi.12986
Zhong, P.; Hu, Z.; Griffa, M.; Wyrzykowski, M.; Liu, J.; Lura, P. Mechanisms of internal curing water release from retentive and non-retentive superabsorbent polymers in cement paste. Cem. Concr. Res. 2021, 147, 106494 (14 pp.). https://doi.org/10.1016/j.cemconres.2021.106494
Zuncheddu, D.; Della Bella, E.; Schwab, A.; Petta, D.; Rocchitta, G.; Generelli, S.; Kurth, F.; Parrilli, A.; Verrier, S.; Rau, J. V.; et al. Quality control methods in musculoskeletal tissue engineering: from imaging to biosensors. Bone Res. 2021, 9, 46 (21 pp.). https://doi.org/10.1038/s41413-021-00167-9
von Deschwanden, C.; Schielein, R.; Plamondon, M.; Hofmann, J.; Flisch, A.; Kasperl, S.; Hanke, R.; Dommann, A. Hardware based contrast enhancement and cupping reduction in industrial MeV Cone Beam Computed Tomography. Nucl. Instrum. Methods Phys. Res. A 2021, 994, 165044 (9 pp.). https://doi.org/10.1016/j.nima.2021.165044