Aiyangar, A.; Gale, T.; Magherhi, S.; Anderst, W. How many trials are needed to estimate typical lumbar movement patterns during dynamic X-Ray imaging? J. Biomech. Eng. 2023, 145 (7), 074503 (8 pp.). https://doi.org/10.1115/1.4062117

Brunner, A. J. A review of approaches for mitigating effects from variable operational environments on piezoelectric transducers for long-term structural health Monitoring. Sensors 2023, 23 (18), 7979 (19 pp.). https://doi.org/10.3390/s23187979

Brunner, A. J.; Trattnig, H. Herausforderungen für Langzeitüberwachung von Strukturen und Komponenten mit Schallemission. In SCHALL 23 - Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, presented at the SCHALL 23, Wetzlar, Germany, March 21-22, 2023; DGZfP-Berichtsband; Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP): Berlin, 2023; Vol. BB 179, p (8 pp.).

Brunner, A. J.; Alderliesten, R.; Pascoe, J. A. In-service delaminations in FRP structures under operational loading conditions: Are current fracture testing and analysis on coupons sufficient for capturing the essential effects for reliable predictions? Materials 2023, 16 (1), 248 (24 pp.). https://doi.org/10.3390/ma16010248

Cadosch, H.; Morrisset, D.; Law, A.; Terrasi, G.; Bisby, L. The influence of feedback and convection on imposed heating conditions when using gas-fired radiant panels in fire testing. Fire Saf. J. 2023, 141, 104013 (10 pp.). https://doi.org/10.1016/j.firesaf.2023.104013

Dai, Y.; Li, Z.; Wang, B. Optimizing berth allocation in maritime transportation with quay crane setup times using reinforcement learning. J. Mar. Sci. Eng. 2023, 11 (5), 1025 (14 pp.). https://doi.org/10.3390/jmse11051025

Dong, S.; Wu, X.; Qi, X.; Affolter, C.; Terrasi, G. P.; Xian, G. Prediction model of long-term tensile strength of glass fiber reinforced polymer bars exposed to alkaline solution based on Bayesian optimized artificial neural network. Constr. Build. Mater. 2023, 400, 132885 (12 pp.). https://doi.org/10.1016/j.conbuildmat.2023.132885

Dreyer, M. J.; Kneifel, P.; Hosseini Nasab, S. H.; Weisse, B.; Taylor, W. R. A novel method to accurately recreate in vivo loads and kinematics in computational models of the knee. Comput. Methods Biomech. Biomed. Eng. 2023. https://doi.org/10.1080/10255842.2023.2206934

Dreyer, M. J.; Weisse, B.; Contreras Raggio, J. I.; Zboray, R.; Taylor, W. R.; Preiss, S.; Horn, N. The influence of implant design and limb alignment on in vivo wear rates of fixed‐bearing and rotating‐platform knee implant retrievals. J. Orthop. Res. 2023. https://doi.org/10.1002/jor.25734

Febrer-Nafría, M.; Dreyer, M. J.; Maas, A.; Taylor, W. R.; Smith, C. R.; Hosseini Nasab, S. H. Knee kinematics are primarily determined by implant alignment but knee kinetics are mainly influenced by muscle coordination strategy. J. Biomech. 2023, 161, 111851 (8 pp.). https://doi.org/10.1016/j.jbiomech.2023.111851

Gfrerrer, M.; Wiener, J.; Brunner, A. J.; Pinter, G. Schallemissionsanalyse während der zyklischen Belastung von kontinuierlich faserverstärkten Kunststoffen. In SCHALL 23 – Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, presented at the SCHALL 23, Wetzlar, Germany, March 21-22, 2023; DGZfP-Berichtsband; Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP): Berlin, 2023; Vol. BB 179, p (9 pp.).

Haiden, L.; Brunner, A. J.; Pansare, A. V.; Feuchter, M.; Pinter, G. Tailoring the optical and UV reflectivity of CFRP-epoxy composites: approaches and selected results. Sci. Eng. Compos. Mater. 2023, 30 (1), 20220175 (12 pp.). https://doi.org/10.1515/secm-2022-0175

Kadu, R. K.; Thakur, P. B.; Zote, S. W.; Donde, K. J.; Barbezat, M.; Terrasi, G. P.; Patil, V. R.; Pansare, A. V. Blue light-emitting fluorene-dendron hybridized polymers: optophysical features. Polym. Bull. 2023, 80 (9), 10379-10392. https://doi.org/10.1007/s00289-022-04571-x

Li, Z.; Jiang, X.; Hopman, H.; Affolter, C. Surface crack growth in metallic pipes reinforced with fibre-reinforced polymers subjected to cyclic loads: an analytical approach. Theor. Appl. Fract. Mech. 2023, 127, 104070 (12 pp.). https://doi.org/10.1016/j.tafmec.2023.104070

Michel, S.; Hauf, F.; Brunner, A. J. Evaluation of a climbing drum laminate peel test to determine the interlaminar mode I fracture toughness of thin CFRP laminates - comparison with the standard mode I DCB test and a mandrel laminate peel test proposed by ESIS TC4. Front. Mater. 2023, 10, 981647 (13. https://doi.org/10.3389/fmats.2023.981647

Mohammed, H.; Sultangaliyeva, F.; Wyrzykowski, M.; Terrasi, G. P.; Bisby, L. Heat-induced explosive spalling of self-prestressing, self-compacting concrete slabs. Constr. Build. Mater. 2023, 372, 130821 (11 pp.). https://doi.org/10.1016/j.conbuildmat.2023.130821

Mohsin, M. A. A.; Iannucci, L.; Greenhalgh, E. S. Delamination of novel carbon fibre-based non-crimp fabric-reinforced thermoplastic composites in Mode I: experimental and fractographic analysis. Polymers 2023, 15 (7), 1611 (14 pp.). https://doi.org/10.3390/polym15071611

Palacio, O.; Malfait, W. J.; Michel, S.; Barbezat, M.; Mazrouei-Sebdani, Z. Vibration and structure-borne sound isolation properties of silica aerogels. Constr. Build. Mater. 2023, 399, 132568 (13 pp.). https://doi.org/10.1016/j.conbuildmat.2023.132568

Rüthi, J.; Rast, B. M.; Qi, W.; Perez-Mon, C.; Pardi-Comensoli, L.; Brunner, I.; Frey, B. The plastisphere microbiome in alpine soils alters the microbial genetic potential for plastic degradation and biogeochemical cycling. J. Hazard. Mater. 2023, 441, 129941 (14 pp.). https://doi.org/10.1016/j.jhazmat.2022.129941

Sharma, K.; Morlec, E.; Valet, S.; Camenzind, M.; Weisse, B.; Rossi, R. M.; Sorin, F.; Boesel, L. F. Polydimethylsiloxane based soft polymer optical fibers: from the processing-property relationship to pressure sensing applications. Mater. Des. 2023, 232, 112115 (14 pp.). https://doi.org/10.1016/j.matdes.2023.112115

Struzziero, G.; Barbezat, M.; Skordos, A. A. Assessment of the benefits of 3D printing of advanced thermosetting composites using process simulation and numerical optimisation. Addit. Manuf. 2023, 63, 103417 (16 pp.). https://doi.org/10.1016/j.addma.2023.103417

Vettoretto, G.; Li, Z.; Affolter, C. Evaluation of the ultimate collapse load of a high-voltage transmission tower under excessive wind loads. Buildings 2023, 13 (2), 513 (26 pp.). https://doi.org/10.3390/buildings13020513

Vidrih, T.; Ott, V.; Terrasi, G. P. Mechanical performance of 3D-printed carbon fiber reinforced thermoplastic looped tensile elements. In Single volume proceedings. CICE 2023. 11th international conference on fiber-reinforced polymer (FRP) composites in civil engineering, presented at the CICE 2023. 11th international conference on fiber-reinforced polymer (FRP) composites in civil engineering, Rio de Janeiro, July 23-26, 2023; sine nomine: sine loco, 2023; p (8 pp.). https://doi.org/10.5281/zenodo.8066453

Zote, S. W.; Navale, D. N.; Ranade, P. B.; Kulal, D. K.; Wagh, S. J.; Pansare, A. Synthesis of cholest-5-en-3-ol(3β)-3-[4-(2,2,2-trifluoroacetamido) benzoate] (ChTfAB) a thermotropic liquid crystalline material. Indian J. Chem. 2023, 62 (7), 755-760. https://doi.org/10.56042/ijc.v62i7.3736