Publications 2006 - 2009
Affolter, C.; Piskoty, G.; Wullschleger, L.; Weisse, B. Collapse of a high storage rack. Eng. Fail. Anal. 2009, 16 (6), 1846-1855. https://doi.org/10.1016/j.engfailanal.2008.09.011
Affolter, C.; Weisse, B.; Stutz, A.; Köbel, S.; Terrasi, G. P. Optimization of the stress distribution in ceramic femoral heads by means of finite element methods. Proc. Inst. Mech. Eng. Part H-J. Eng. Med. 2009, 223 (2), 237-248. https://doi.org/10.1243/09544119JEIM429
Barbezat, M.; Brunner, A. J.; Necola, A.; Rees, M.; Gasser, P.; Terrasi, G. Fracture behavior of GFRP laminates with nanocomposite epoxy resin matrix. J. Compos. Mater. 2009, 43 (9), 959-976. https://doi.org/10.1177/0021998308100799
Birchmeier, M.; Gsell, D.; Juon, M.; Brunner, A. J.; Paradies, R.; Dual, J. Active fiber composites for the generation of Lamb waves. Ultrasonics 2009, 49 (1), 73-82. https://doi.org/10.1016/j.ultras.2008.05.003
Birchmeier, M. Characterization and application of active fiber composites. Doctoral dissertation, ETH Zürich, Switzerland, 2009, 148 p. https://doi.org/10.3929/ethz-a-005997094
Brunner, A. J.; Murphy, N.; Pinter, G. Development of a standardized procedure for the characterization of interlaminar delamination propagation in advanced composites under fatigue mode I loading conditions. Eng. Fract. Mech. 2009, 76 (18), 2678-2689. https://doi.org/10.1016/j.engfracmech.2009.07.014
Brunner, A. J.; Paris, I.; Pinter, G. Fatigue propagation test development for polymer-matrix fibre-reinforced laminates. In 12th international conference on fracture 2009 (ICF-12), presented at the 12th international conference on fracture, Ottawa, Canada, July 12-17, 2009; International Congress on Fracture (ICF): sine loco, 2009; Vol. 3, p (9 pp.).
Brunner, A. J.; Terrasi, G. P.; Cartié, D. D. R. Fatigue testing of Z-pin reinforced carbon-fibre laminates. In 12th international conference on fracture 2009 (ICF-12), presented at the 12th international conference on fracture, Ottawa, Canada, July 12-17, 2009; International Congress on Fracture (ICF): sine loco, 2009; Vol. 8, pp 6196-6205.
Brunner, A. J.; Birchmeier, M.; Melnykowycz, M. M.; Barbezat, M. Piezoelectric fiber composites as sensor elements for structural health monitoring and adaptive material systems. J. Intell. Mater. Syst. Struct. 2009, 20 (9), 1045-1055. https://doi.org/10.1177/1045389X08101196
Brunner, A. J.; Niemz, P.; Walter, O. Schallemissionsanalyse von Zugversuchen an Standardprüfkörpern aus unterschiedlichen Holzwerkstoffen. Presented at the 17. Kolloquium Schallemission. Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse, Bad Schandau, Germany, September 24–25, 2009; p (8 pp.).
Brunner, A. J.; Terrasi, G. P.; Tannert, T.; Vallée, T. Schallemissionsüberwachung von Zugversuchen an zweiseitig überlappenden Klebverbindungen zwischen GFK-Profilen bzw. Holz-Latten. Presented at the 17. Kolloquium Schallemission. Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse, Bad Schandau, Germany, September 24–25, 2009; p (8 pp.).
Brönnimann, R.; Terrasi, G. P. Strain monitoring by resistance measurement of carbon fiber prestressing tendons in filigree high performance concrete elements. In Proceedings of the 4th international conference on structural health monitoring of intelligent infrastructure, presented at the 4th international conference on structural health monitoring of intelligent infrastructure (SHMII-4) 2009, Zurich, Switzerland, July 22–24, 2009; Meier, U., Havranek, B., Motavalli, M., Eds.; ISHMII: Winnipeg, Manitoba, Canada, 2009; p 679 (8 pp.).
Cartié, D. D. R.; Laffaille, J. M.; Partridge, I. K.; Brunner, A. J. Fatigue delamination behaviour of unidirectional carbon fibre/epoxy laminates reinforced by Z-Fiber® pinning. Eng. Fract. Mech. 2009, 76 (18), 2834-2845. https://doi.org/10.1016/j.engfracmech.2009.07.018
Castillo, E.; Fernández-Canteli, A.; Koller, R.; Ruiz-Ripoll, M. L.; García, A. A statistical fatigue model covering the tension and compression Wöhler fields. Probab. Eng. Mech. 2009, 24 (2), 199-209. https://doi.org/10.1016/j.probengmech.2008.06.003
Chakraborty, A. K.; Coleman, K. S.; Dhanak, V. R. The electronic fine structure of 4-nitrophenyl functionalized single-walled carbon nanotubes. Nanotechnology 2009, 20 (15), 155704 (6 pp.). https://doi.org/10.1088/0957-4484/20/15/155704
Dürager, C.; Brunner, A. J.; Barbezat, M. Health monitoring of welded aluminum beams. In Proceedings of the 4th international conference on structural health monitoring of intelligent infrastructure, presented at the 4th international conference on structural health monitoring of intelligent infrastructure (SHMII-4) 2009, Zurich, Switzerland, July 22–24, 2009; Meier, U., Havranek, B., Motavalli, M., Eds.; ISHMII: Winnipeg, Manitoba, Canada, 2009; p 350 (8 pp.).
Falub, C. V.; Thorwarth, G.; Affolter, C.; Müller, U.; Voisard, C.; Hauert, R. A quantitative in vitro method to predict the adhesion lifetime of diamond-like carbon thin films on biomedical implants. Acta Biomater. 2009, 5 (8), 3086-3097. https://doi.org/10.1016/j.actbio.2009.05.009
Koller, R.; Ruiz-Ripoll, M. L.; García, A.; Fernández-Canteli, A.; Castillo, E. Experimental validation of a statistical model for the Wöhler field corresponding to any stress level and amplitude. Int. J. Fatigue 2009, 31 (2), 231-241. https://doi.org/10.1016/j.ijfatigue.2008.09.003
Kovacs, G.; Düring, L. Contractive tension force stack actuator based on soft dielectric EAP. In Electroactive polymer actuators and devices (EAPAD) 2009, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, California, United States, March 8-12, 2009; Bar-Cohen, Y., Wallmersperger, T., Eds.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2009; Vol. 7287, p 72870A (15 pp.). https://doi.org/10.1117/12.815195
Kovacs, G.; Düring, L.; Michel, S.; Terrasi, G. Stacked dielectric elastomer actuator for tensile force transmission. Sens. Actuators A 2009, 155 (2), 299-307. https://doi.org/10.1016/j.sna.2009.08.027
Mondal, S. P.; Dhar, A.; Ray, S. K.; Chakraborty, A. K. Bonding, vibrational, and electrical characteristics of CdS nanostructures embedded in polyvinyl alcohol matrix. J. Appl. Phys. 2009, 105 (8), 084309 (5 pp.). https://doi.org/10.1063/1.3111971
Niemz, P.; Brunner, A. J.; Walter, O. Investigation of the mechanism of failure behaviour of wood based materials using acoustic emission analysis and image processing. Wood Res. 2009, 54 (2), 49-62.
Oess, N. P.; Weisse, B.; Nelson, B. J. Magnetoelastic strain sensor for optimized assessment of bone fracture fixation. IEEE Sens. J. 2009, 9 (8), 961-968. https://doi.org/10.1109/JSEN.2009.2025575
Paradies, R.; Ciresa, P. Active wing design with integrated flight control using piezoelectric macro fiber composites. Smart Mater. Struct. 2009, 18 (3), 035010 (9 pp.). https://doi.org/10.1088/0964-1726/18/3/035010
Paradies, R.; Schläpfer, B. Finite element modeling of piezoelectric elements with complex electrode configuration. Smart Mater. Struct. 2009, 18 (2), 025015 (13 pp.). https://doi.org/10.1088/0964-1726/18/2/025015
Piskoty, G.; Zgraggen, M.; Weisse, B.; Affolter, C.; Terrasi, G. Structural failures of rope-based systems. Eng. Fail. Anal. 2009, 16 (6), 1929-1939. https://doi.org/10.1016/j.engfailanal.2008.10.004
Terrasi, G. P.; Brunner, A. J.; Vallée, T.; Tannert, T. Monitoring and evaluation of damage behaviour of adhesively bonded joints under tensile loads. Presented at the Swiss Bonding 09, Rapperswil-Jona, Switzerland, May 11-13, 2009; Empa: Dübendorf, Switzerland; p (11 pp.).
Weisse, B.; Affolter, C.; Terrasi, G. P.; Piskoty, G.; Köbel, S. Failure analysis of in vivo fractured ceramic femoral heads. Eng. Fail. Anal. 2009, 16 (4), 1188-1194. https://doi.org/10.1016/j.engfailanal.2008.07.015
Abouhossein, A.; Weisse, B.; Piskoty, G.; Affolter, C.; Ferguson, S. J. A nonlinear, dynamic, multi-body model of the lumbar spine. Presented at the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Porto, Portugal, February 27 - March 1, 2008; p (6 pp.).
Birchmeier, M.; Brunner, A. J.; Paradies, R.; Dual, J. Active fiber composites for exciting and sensing structural waves in plate-like structures. In Proceedings of the 4th European workshop on structural health monitoring, presented at the 4th European workshop on structural health monitoring, Krakow, Poland, July 2-4, 2008; Uhl, T., Ostachowicz, W., Holnicki-Szulc, J., Eds.; Destech pubns Inc: sine loco, 2008; pp 422-429.
Bohse, J.; Brunner, A. J. Acoustic emission in delamination investigation. In Delamination behaviour of composites; Sridharan, S., Ed.; Woodhead Publishing series in composites science and engineering; Woodhead Publishing; CRC Press: Cambridge; Boca Raton, 2008; pp 217-277. https://doi.org/10.1533/9781845694821.2.217
Brunner, A. J.; Blackman, B. R. K.; Davies, P. A status report on delamination resistance testing of polymer-matrix composites. Eng. Fract. Mech. 2008, 75 (9), 2779-2794. https://doi.org/10.1016/j.engfracmech.2007.03.012
Brunner, A. J.; Terrasi, G. P.; Vallée, T.; Keller, T. Acoustic emission analysis and acousto-ultrasonics for damage detection in GFRP adhesive joints. Presented at the 28th European conference on acoustic emission etsting, European working group on acoustic emission (EWGAE), Kraków, Poland, September 17-19, 2008; EWGAE, Cracow UT: sine loco; pp 100-105.
Brunner, A. J.; Terrasi, G. P. Acousto-ultrasonic signal analysis for damage detection in GFRP adhesive joints. J. Acoust. Emiss. 2008, 26, 152-159. http://www.aewg.org/jaeonline.htm
Brunner, A. J. Experimental study of delamination in cross-ply laminates. In Delamination behaviour of composites; Sridharan, S., Ed.; Woodhead Publishing series in composites science and engineering; Woodhead Publishing; CRC Press: Cambridge; Boca Raton, 2008; pp 281-309. https://doi.org/10.1533/9781845694821.3.281
Brunner, A. J.; Hack, E.; Neuenschwander, J. Nondestructive testing. In Characterization and analysis of polymers; Seidel, A., Ed.; Wiley: Hoboken, 2008; pp 357-377. https://www.wiley.com/en-us/Characterization+and+Analysis+of+Polymers-p-9780470233009
Castillo, E.; Ramos, A.; Koller, R.; López-Aenlle, M.; Fernández-Canteli, A. A critical comparison of two models for assessment of fatigue data. Int. J. Fatigue 2008, 30 (1), 45-57. https://doi.org/10.1016/j.ijfatigue.2007.02.014
Fürst, A.; Meier, D.; Michel, S.; Schmidlin, A.; Held, L.; Laib, A. Effect of age on bone mineral density and micro architecture in the radius and tibia of horses: an Xtreme computed tomographic study. BMC Vet. Res. 2008, 4, 3 (12 pp.). https://doi.org/10.1186/1746-6148-4-3
Fürst, A. E.; Oswald, S.; Jäggin, S.; Piskoty, G.; Michel, S.; Auer, J. A. Fracture configurations of the equine radius and tibia after a simulated kick. Vet. Comp. Orthop. Traumatol. 2008, 21 (1), 49-58. https://doi.org/10.3415/VCOT-07-03-0022
Ha, S. M.; Park, I. S.; Wissler, M.; Pelrine, R.; Stanford, S.; Kim, K. J.; Kovacs, G.; Pei, Q. High electromechanical performance of electroelastomers based on interpenetrating polymer networks. In Electroactive Polymer Actuators and Devices (EAPAD) 2008, presented at the Electroactive Polymer Actuators and Devices (EAPAD) 2008, San Diego, California, United States, March 10-13, 2008; Bar-Cohen, Y., Ed.; Proceedings of SPIE - The International Society for Optical Engineering; SPIE: Bellingham, Washington, 2008; Vol. 6927, p 69272C (9 pp.). https://doi.org/10.1117/12.778282
Jordi, C.; Michel, S.; Widmer, N.; Frohne, V. Body segment of an active airship based on dielectric elastomers. In 19th international conference on adaptive structures and technologies 2008 (ICAST 2008), presented at the 19th international conference on adaptive structures and technologies 2008 (ICAST 2008), Ascona, Switzerland, October 6-9, 2008; Swiss federal laboratories for materials science and technology (Empa): Dübendorf, 2008; pp 95-105.
Koller, R.; Stutz, A.; Terrasi, G. P.; Necola, A.; Stöcklin, I. Prestressed CFRP-laminate patching of welded steel beams for increased durability. In FRP composites in civil engineering. Proceedings of the 4th international conference on FRP composites in civil engineering, presented at the Fourth international conference on FRP composites in civil engineering (CICE2008), Zurich, Switzerland, July 22–24, 2008; Motavalli, M., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2008; p (6 pp.).
Kovacs, G.; Düring, L.; Michel, S.; Terrasi, G. Field induced deformation of active structures based on dielectric elastomers. In 19th international conference on adaptive structures and technologies (ICAST 2008), presented at the 19th international conference on adaptive structures and technologies (ICAST 2008), Ascona, Switzerland, October 6-9, 2008; Swiss federal laboratories for materials science and technology (Empa): Dübendorf, 2008; pp 45-64.
Kovacs, G.; Lochmatter, P.; Wissler, M.; Iseli, C.; Kessler, L. Robotic arm. In Dielectric elastomers as electromechanical transducers. Fundamentals, materials, devices, models and applications of an emerging electroactive polymer technology; Carpi, F., De Rossi, D., Kornbluh, R., Pelrine, R., Sommer-Larsen, P., Eds.; Elsevier: Oxford; Amsterdam, 2008; pp 279-289. https://doi.org/10.1016/B978-0-08-047488-5.00027-7
Kovacs, G.; Ha, S. M.; Michel, S.; Pelrine, R.; Pei, Q. Study on core free rolled actuator based on soft dielectric EAP. In Electroactive Polymer Actuators and Devices (EAPAD) 2008, presented at the Electroactive Polymer Actuators and Devices (EAPAD) 2008, San Diego, California, United States, March 10-13, 2008; Bar-Cohen, Y., Ed.; Proceedings of SPIE - The International Society for Optical Engineering; SPIE: Bellingham, Washington, 2008; Vol. 6927, p 69270X (15 pp.). https://doi.org/10.1117/12.776787
Lochmatter, P.; Kovacs, G. Design and characterization of an active hinge segment based on soft dielectric EAPs. Sens. Actuators A 2008, 141 (2), 577-587. https://doi.org/10.1016/j.sna.2007.10.029
Lochmatter, P.; Kovacs, G. Design and characterization of an actively deformable shell structure composed of interlinked active hinge segments driven by soft dielectric EAPs. Sens. Actuators A 2008, 141 (2), 588-597. https://doi.org/10.1016/j.sna.2007.10.030
Michel, S.; Jordi, C.; Wahl, L.; Widmer, N.; Fink, E.; Kniese, L.; Bormann, A. Biomimetics in airship design. In 19th international conference on adaptive structures and technologies 2008 (ICAST 2008), presented at the 19th international conference on adaptive structures and technologies 2008 (ICAST 2008), Ascona, Switzerland, October 6-9, 2008; Swiss federal laboratories for materials science and technology (Empa): Dübendorf, 2008; pp 489-509.
Michel, S.; Bormann, A.; Jordi, C.; Fink, E. Feasibility studies for a bionic propulsion system of a blimp based on dielectric elastomers. In Electroactive polymer actuators and devices (EAPAD) 2008, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, March 9-13, 2008; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2008; Vol. 6927, p 69270S (15 pp.). https://doi.org/10.1117/12.777588
Niemz, P.; Brunner, A. J.; Walter, O. Investigation of the mechanism of failure behavior of wood-based materials using acoustic emission analysis and image processing. In Proceedings of the 15th international symposium on nondestructive testing of wood, presented at the 15th international symposium on nondestructive testing of wood, Duluth, Minnesota, USA, September 10-12, 2007; Ross, R. J., Wang, X., Brashaw, B. K., Eds.; Madison : Forest Products Society, 2008; pp 135-141.
Ruiz-Ripoll, M. L.; García, A.; Castillo, E.; Fernández-Canteli, A.; Koller, R. Fatigue damage measures with a statistical model for the Wöhler field. In Life-cycle civil engineering, presented at the IALCCE'08 – first international symposium on life-cycle civil engineering, Varenna, Italy, June 10-14, 2008; Biondini, F., Frangopol, D. M., Eds.; IALCCE symposia; Taylor & Francis group: London, England, 2008; pp 221-226.
Schmid Daners, M.; Wullschleger, L.; Derler, S.; Schmitt, K. U. Development of a new design of hip protectors using finite element analysis and mechanical tests. Med. Eng. Phys. 2008, 30 (9), 1186-1192. https://doi.org/10.1016/j.medengphy.2008.02.011
Terrasi, G. P.; Affolter, C.; Barbezat, M.; Bättig, G. Increasing the acceptance of high performance concrete prestressed with CFRP. In FRP composites in civil engineering. Proceedings of the 4th international conference on FRP composites in civil engineering, presented at the Fourth international conference on FRP composites in civil engineering (CICE2008), Zurich, Switzerland, July 22–24, 2008; Motavalli, M., Ed.; International Institute for FRP in Construction (IIFC): sine loco, 2008; p (6 pp.).
Weisse, B.; Affolter, C.; Stutz, A.; Terrasi, G. P.; Köbel, S.; Weber, W. Influence of contaminants in the stem–ball interface on the static fracture load of ceramic hip joint ball heads. Proc. Inst. Mech. Eng. Part H-J. Eng. Med. 2008, 222 (5), 829-835. https://doi.org/10.1243/09544119JEIM374
Wissler, M.; Mazza, E. Modelling of prestrained circular actuators. In Dielectric elastomers as electromechanical transducers. Fundamentals, materials, devices, models and applications of an emerging electroactive polymer technology; Carpi, F., De Rossi, D., Kornbluh, R., Pelrine, R., Sommer-Larsen, P., Eds.; Elsevier: Oxford, UK, 2008; pp 169-176. https://doi.org/10.1016/B978-0-08-047488-5.00017-4
Zhang, R.; Lochmatter, P.; Kovacs, G.; Kunz, A.; Conti, F. Portable force feedback device based on miniature rolled dielectric elastomer actuators. In Dielectric elastomers as electromechanical transducers. Fundamentals, materials, devices, models and applications of an emerging electroactive polymer technology; Carpi, F., De Rossi, D., Kornbluh, R., Pelrine, R., Sommer-Larsen, P., Eds.; Elsevier: Oxford, 2008; pp 207-216. https://doi.org/10.1016/B978-0-08-047488-5.00020-4
Affolter, C.; Piskoty, G.; Koller, R.; Zgraggen, M.; Rütti, T. F. Fatigue in the shell of a conveyor drum. Eng. Fail. Anal. 2007, 14 (6), 1038-1052. https://doi.org/10.1016/j.engfailanal.2006.11.071
Barbezat, M.; Brunner, A. J.; Necola, A.; Rees, M.; Gasser, P.; Terrasi, G. Fracture behaviour of GFRP laminates with nanocomposite epoxy resin matrix. Paper 030. In Proceedings of COMP07: 6th international symposium on advanced composites 16-18 May, 2007, Corfu, Greece, presented at the 6th international symposium on advanced composites (COMP07), Corfu, Greece, May 16-18, 2007; 2007; p (9 pp.).
Barbezat, M.; Brunner, A. J.; Huber, C.; Flüeler, P. Integrated active fiber composite elements: characterization for acoustic emission and acousto-ultrasonics. J. Intell. Mater. Syst. Struct. 2007, 18 (5), 515-525. https://doi.org/10.1177/1045389X06067140
Birchmeier, M.; Brunner, A. J.; Paradies, R.; Dual, J. Experimental characterization of active fiber composites used as piezoelectric transducers for emitting and receiving Lamb waves in plate-like structures. Presented at the International conference on advanced technology in experimental mechanics (ATEM'07), Fukuoka, Japan, September 12-14, 2007; The Japan society of mechanical engineers: Tokyo, Japan; p (6 pp.). https://doi.org/10.1299/jsmeatem.2007.6._OS17-2-2-
Brunner, A. J.; Niemz, P.; Walter, O. Damage accumulation and failure of different types of wood-panels under tensile loading. In 22nd technical conference of the American Society for Composites 2007. Composites: enabling a new era in civil aviation, presented at the 22nd technical conference of the American Society for Composites 2007. Composites: enabling a new era in civil aviation, Seattle, Washington, USA, September 17-19, 2007; Feraboli, P., Stickler, P., Eds.; DEStech Publications: Lancaster, Pennsylvania, 2007; Vol. 3, pp 2069-2084.
Brunner, A. J.; Terrasi, G. P. Delamination resistance testing of glass-fiber composite laminates. In 22nd technical conference of the American society for composites 2007. "Composites: enabling a new era in civil aviation", presented at the 22nd technical conference of the American society for composites 2007. "Composites: enabling a new era in civil aviation", Seattle, Washington, USA, September 17-19, 2007; Feraboli, P., Stickler, P., Eds.; American Society for Composites: Lancaster, Pennsylvania, 2007; Vol. 1, pp 24-38.
Brunner, A. J.; Hack, E.; Neuenschwander, J. Nondestructive testing. In Encyclopedia of polymer science and technology; Wiley: Hoboken, 2007; pp 747-751.
Brunner, A. J.; Birchmeier, M.; Melnykowycz, M.; Barbezat, M. Piezoelectric active fiber composites as sensor elements for structural health monitoring and adaptive material systems. In Proceedings of COMP07: 6th international symposium on advanced composites 16-18 May, 2007, Corfu, Greece, presented at the 6th international symposium on advanced composites (COMP07), Corfu, Greece, May 16-18, 2007; 2007; p (7 pp.).
Clemens, F.; Heiber, J.; Ismael, M. R.; Paradies, R.; Graule, T.; Piechowiak, M.; Kozielsk, L.; Czekaj, D. The influence of the sintering atmosphere and the fibre geometry on the piezoelectric properties of PZT single fibres and AFC structures. Presented at the International symposium on piezocomposite applications - ISPA 2007. Volkswagen „Die gläserne Manufaktur“, Dresden, Germany, September 27-28, 2007; p (10 pp.).
Dürager, C.; Michel, S.; Zobel, M.; Fink, E. Electroactive polymers as a novel actuator technology for lighter-than-air vehicles. In Electroactive polymer actuators and devices (EAPAD) 2007, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, March 18-22, 2007; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2007; Vol. 6524, p 65241Q (11 pp.). https://doi.org/10.1117/12.716658
Dürager, C.; Brunner, A. J. Wireless signal transmission and excitation for piezoelectric active fibre composite elements. Presented at the International conference on advanced technology in experimental mechanics (ATEM'07), Fukuoka, Japan, September 12-14, 2007; The Japan society of mechanical engineers: Tokyo, Japan; p (6 pp.). https://doi.org/10.1299/jsmeatem.2007.6._OS17-2-5-
Ha, S. M.; Wissler, M.; Pelrine, R.; Stanford, S.; Kovacs, G.; Pei, Q. Characterization of electroelastomers based on interpenetrating polymer networks. In Electroactive polymer actuators and devices (EAPAD) 2007, presented at the Electroactive polymer actuators and devices (EAPAD) 2007, San Diego, California, USA, March 19-22, 2007; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, 2007; Vol. 6524, p 652408 (10 pp.). https://doi.org/10.1117/12.715061
Kovacs, G.; Lochmatter, P.; Wissler, M. An arm wrestling robot driven by dielectric elastomer actuators. Smart Mater. Struct. 2007, 16 (2), S306-S317. https://doi.org/10.1088/0964-1726/16/2/S16
Lochmatter, P.; Kovacs, G.; Michel, S. Characterization of dielectric elastomer actuators based on a hyperelastic film model. Sens. Actuators A 2007, 135 (2), 748-757. https://doi.org/10.1016/j.sna.2006.08.006
Lochmatter, P.; Kovacs, G.; Wissler, M. Characterization of dielectric elastomer actuators based on a visco-hyperelastic film model. Smart Mater. Struct. 2007, 16 (2), 477-486. https://doi.org/10.1088/0964-1726/16/2/028
Lochmatter, P.; Kovacs, G. Concept study on active shells driven by soft dielectric EAP. In Electroactive polymer actuators and devices (EAPAD) 2007, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, March 18-22, 2007; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2007; Vol. 6524, p 65241O (13 pp.). https://doi.org/10.1117/12.716642
Lochmatter, P.; Kovacs, G.; Ermanni, P. Design and characterization of shell-like actuators based on soft dielectric electroactive polymers. Smart Mater. Struct. 2007, 16 (4), 1415-1422. https://doi.org/10.1088/0964-1726/16/4/056
Lochmatter, P. Development of a shell-like electroactive polymer (EAP) actuator. Doctoral dissertation, ETH Zürich, Switzerland, 2007, 307 p.
Michel, S.; Bernasconi, M.; Bormann, A.; Zobel, M.; Fink, E. Feasibility studies for a bionic blimb with a fish-like propulsion systems. In 7th AIAA ATIO conf, 2nd CEIAT int'l conf on innov and integr in aero sciences, 17th LTA systems tech conf; followed by 2nd TEOS forum, presented at the 7th AIAA aviation technology, integration and operations conference (ATIO), Belfast, Northern Ireland, September 18-20, 2007; American Institute of Aeronautics and Astronautics: Reston, VA, 2007; pp 29-40. https://doi.org/10.2514/6.2007-7703
Paradies, R.; Melnykowycz, M. Numerical stress investigation for piezoelectric elements with a circular cross section and interdigitated electrodes. J. Intell. Mater. Syst. Struct. 2007, 18 (9), 963-972. https://doi.org/10.1177/1045389X06071438
Paradies, R. Vergleich piezoelektrischer Elemente Wafer - AFC - ABC. Presented at the Internationales forum mechatronik (ifm2007), Winterthur, Switzerland, September 12-13, 2007; pp 270-286.
Piskoty, G.; Klotz, U. E.; Kovacs, G.; Weisse, B.; Rütti, T. F.; Stutz, A. Analysis of a tragic accident on a summer toboggan run. Eng. Fail. Anal. 2007, 14 (6), 1083-1092. https://doi.org/10.1016/j.engfailanal.2006.11.057
Roos, R.; Kress, G.; Barbezat, M.; Ermanni, P. Enhanced model for interlaminar normal stress in singly curved laminates. Compos. Struct. 2007, 80 (3), 327-333. https://doi.org/10.1016/j.compstruct.2006.05.022
Rütti, T. F.; Piskoty, G.; Koller, R.; Wullschleger, L.; Michel, S. A. Optimised design of mandrels after fatigue failure. Eng. Fail. Anal. 2007, 14 (6), 1103-1113. https://doi.org/10.1016/j.engfailanal.2006.11.062
Terrasi, G. P. Prefabricated thin-walled structural elements made from high performance concrete prestressed with pultruded carbons wires. In Fiber-reinforced polymer reinforcement for concrete structures: proceedings of the 8th international symposium on fiber-reinforced polymer reinforcement for concrete structures (FRPRCS-8), presented at the 8th international symposium on fiber-reinforced polymer reinforcement for concrete structures (FRPRCS-8), Patras, Greece, July 16-18, 2007; Triantafillou, T., Ed.; Publisher University of Patras: Patras, Greece, 2007; p (10 pp.).
Winkler, R.; Piskoty, G.; Zgraggen, M. Qualitätsmängel und die tragischen Folgen, am Beispiel einer gebrochenen Kinderschaukel-Aufhängung. Prakt. Metallogr. 2007, 44 (4), 193-196.
Wissler, M.; Mazza, E.; Kovacs, G. Electromechanical coupling in cylindrical dielectric elastomer actuators. In Electroactive polymer actuators and devices (EAPAD) 2007, presented at the Electroactive polymer actuators and devices (EAPAD) 2007, San Diego, California, USA, March 19-22, 2007; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, 2007; Vol. 6524, p 652409 (10 pp.). https://doi.org/10.1117/12.714946
Wissler, M.; Mazza, E. Electromechanical coupling in dielectric elastomer actuators. Sens. Actuators A 2007, 138 (2), 384-393. https://doi.org/10.1016/j.sna.2007.05.029
Wissler, M.; Mazza, E. Mechanical behavior of an acrylic elastomer used in dielectric elastomer actuators. Sens. Actuators A 2007, 134 (2), 494-504. https://doi.org/10.1016/j.sna.2006.05.024
Wissler, M. T. Modeling dielectric elastomer actuators. Doctoral dissertation, ETH Zürich, Switzerland, 2007, 153 p. https://doi.org/10.3929/ethz-a-005406421
Wullschleger, L.; Rütti, T. F.; Zgraggen, M.; Piskoty, G. Structural collapse of a freestyle ski-jump. Eng. Fail. Anal. 2007, 14 (8), 1512-1525. https://doi.org/10.1016/j.engfailanal.2006.12.006
Barbezat, M.; Birchmeier, M.; Santschi, Y.; Brunner, A. J. Damage detection in fiber-reinforced laminates using impedance testing with piezoelectric active fiber composite elements. In Sixteenth international conference on adaptive structures and technologies, presented at the Sixteenth international conference on adaptive structures and technologies, Paris, France, October 9-12, 2005; Bernadou, M., Cagnol, J., Ohayon, R., Eds.; DEStech publications, Inc.: Lancaster, Pennsylvania, USA, 2006; pp 109-116.
Birchmeier, M.; Brunner, A. J.; Paradies, R.; Dual, J. Active fiber composites as orthotropic piezoelectric transducers for structural health monitoring applications: experimental approach. In CANSMART 2006 proceedings: international workshop smart materials & structures, presented at the 9th Cansmart meeting, international workshop on smart materials and structures, Toronto, Ontario, Canada, October 12-13, 2006; Akhras, G., Ed.; 2006; pp 203-212.
Blackman, B. R. K.; Brunner, A. J.; Williams, J. G. Mode II fracture testing of composites: a new look at an old problem. Eng. Fract. Mech. 2006, 73 (16), 2443-2455. https://doi.org/10.1016/j.engfracmech.2006.05.022
Brunner, A. J.; Barbezat, M. Acoustic emission monitoring of delamination growth in fiber-reinforced polymer-matrix composites. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, 2006; pp 291-292. https://doi.org/10.1007/1-4020-4972-2_143
Brunner, A. J.; Barbezat, M. Acoustic emission monitoring of delamination growth in fibre-reinforced polymer-matrix composites. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, Netherlands, 2006; p (8 pp.).
Brunner, A. J.; Barbezat, M. Acoustic emission monitoring of leaks in pipes for transport of liquid and gaseous media: a model experiment. In Acoustic emission testing. European Working Group on Acoustic Emission, presented at the 27th European conference on acoustic emission testing, Cardiff, Wales; United Kingdom, September 20–22, 2006; Pullin, R., Holford, K. M., Evans, S. L., Dulieu-Barton, J. M., Eds.; Advanced materials research; Trans Tech Publications: Durnten-Zurich, Switzerland, 2006; Vol. 13-14, pp 351-356. https://doi.org/10.4028/www.scientific.net/AMR.13-14.351
Brunner, A. J.; Howald, M. T.; Niemz, P. Acoustic emission rate behavior of laminated wood specimens under tensile loading. J. Acoust. Emiss. 2006, 24, 104-110. http://www.aewg.org/jaeonline.htm
Brunner, A. J.; Blackman, B. R. K.; Williams, J. G. Calculating a damage parameter and bridging stress from GIC delamination tests on fibre composites. Compos. Sci. Technol. 2006, 66 (6), 785-795. https://doi.org/10.1016/j.compscitech.2004.12.040
Brunner, A. J. Fracture testing of polymer-matrix composites. Presented at the 10th Portuguese conference on fracture, Guimarães, Portugal, February 22-24, 2006; p (11 pp.).
Brunner, A. J.; Birchmeier, M.; Barbezat, M. Piezoelectric active fiber composites as acoustic emission sensors for structural integrity monitoring of adaptive material systems. In Proceedings of AAUM 6th International Symposium, presented at the 6th international symposium on advanced acoustic emission and ultrasonic of new materials (AAUM), Kanagawa, Japan, 28 July, 2006; 2006; p (8 pp.).
Brunner, A. J.; Necola, A.; Rees, M.; Gasser, P.; Kornmann, X.; Thomann, R.; Barbezat, M. The influence of silicate-based nano-filler on the fracture toughness of epoxy resin. Eng. Fract. Mech. 2006, 73 (16), 2336-2345. https://doi.org/10.1016/j.engfracmech.2006.05.004
Castillo, E.; Ramos, A.; López-Aenlle, M.; Fernández-Canteli, A.; Koller, R. Comparative analysis of two models for evaluating fatigue data. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, Netherlands, 2006; pp 183-184. https://doi.org/10.1007/1-4020-4972-2_89
Kovacs, G.; Lochmatter, P. Arm wrestling robot driven by dielectric elastomer actuators. In Proc. of SPIE Smart structures and materials 2006: electroactive polymer actuators and devices (EAPAD), presented at the SPIE Smart structures and materials + nondestructive evaluation and health monitoring, San Diego, California, United States, February 27 - March 2, 2006; Bar-Cohen, Y., Ed.; Proceedings of SPIE - The International Society for Optical Engineering; SPIE, 2006; Vol. 6168, p 616807 (12 pp.). https://doi.org/10.1117/12.658602
Kovacs, G. Arm wrestling robot driven by dielectric elastomer actuators. In Proceedings of the first IEEE / RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, presented at the BioRob 2006, Pisa, Italy, February 20-22, 2006; IEEE, 2006; Vol. 2006, pp 254-259. https://doi.org/10.1109/BIOROB.2006.1639096
Lochmatter, P.; Kovacs, G.; Ermanni, P. Design and characterization of shell-like dielectric elastomer actuators. In Proceedings of ICAST2006: 17th international conference on adaptive structures and technologies, presented at the 17th international conference on adaptive structures and technologies, ICAST2006, Taipei, Taiwan, October 16-19, 2006; Institute of applied mechanics, National Taiwan University, 2006; pp 285-292.
Lochmatter, P.; Michel, S.; Kovacs, G. Electromechanical model for static and dynamic activation of elementary dielectric elastomer actuators. In Smart structures and materials 2006: electroactive polymer actuators and devices (EAPAD), presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, February 26 - March 2, 2006; Bar-Cohen, Y., Ed.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2006; Vol. 6168, p 61680F (13 pp.). https://doi.org/10.1117/12.657873
Melnykowycz, M.; Martinez, M.; Nitzsche, F.; Barbezat, M.; Artemev, A. Acitve airfoil design and finite element analysis of smart structures for rotor blade applications. In 16th international conference on adaptive structures and technologies (ICAST), presented at the 16th international conference on adaptive structures and technologies (ICAST), Paris, France, October 9-12, 2005; Bernadou, M., Cagnol, J., Ohayon, R., Eds.; DEStech publickations, Inc.: Lancaster, Pennsylvania, USA, 2006; pp 182-189.
Melnykowycz, M. M.; Belloli, A.; Ermanni, P.; Barbezat, M. Integration and reliability of active fiber composite (AFC) sensors/actuators in carbon/epoxy laminates. In Smart structures and materials 2006: active materials: behavior and mechanics, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, CA, USA, February 26 - March 2, 2006; Armstrong, W. D., Ed.; Proceedings of SPIE; SPIE: Bellingham, WA, USA, 2006; Vol. 6170, p 61701J (11 pp.). https://doi.org/10.1117/12.658639
Melnykowycz, M.; Kornmann, X.; Huber, C.; Barbezat, M.; Brunner, A. J. Performance of integrated active fiber composites in fiber reinforced epoxy laminates. Smart Mater. Struct. 2006, 15 (1), 204-212. https://doi.org/10.1088/0964-1726/15/1/050
Michel, S. Elektroaktive Polymere (EAP) als Aktoren. Presented at the VDI Seminar 357802 'Kunstofftechnik für Sensoren und Aktoren', Fürth, Deutschland, Oktober 25.-26., 2006; p (19 pp.).
Nguyen, C. H.; Kornmann, X. A comparison of dynamic piezoactuation of fiber-based actuators and conventional PZT patches. J. Intell. Mater. Syst. Struct. 2006, 17 (1), 45-55. https://doi.org/10.1177/1045389x06056065
Nitzsche, F.; Müller, M. A.; Paradies, R. Characterization of active fiber composites for sensor applications. In Proceedings of ICAST2006: 17th international conference on adaptive structures and technologies, Oct. 16 ~ Oct. 19, Taipei, Taiwan, presented at the 17th international conference on adaptive structures and technologies (ICAST2006), Taipei, Taiwan, October 16-19, 2006; Institute of applied mechanics, National Taiwan University, 2006; pp 246-256.
Pini, N.; Belloli, A.; Schubach, H. R.; Hack, E.; Barbezat, M.; Ermanni, P. Characterisation of active fibre composites with polypyrrole finger electrodes. In Proceedings of ICAST2006: 17th international conference on adaptive structures and technologies, presented at the 17th international conference on adaptive structures and technologies (ICAST 2006), Taipei, Taiwan, October 16-19, 2006; Institute of Applied Mechanics: Taipei, 2006; pp 142-150.
Richter, K.; Barbezat, M.; Pizzi, A.; Despres, A. Thermal stability of structural one-component polyurethane adhesives. Presented at the Wood adhesives 2005, San Diego, California, USA, November 2-4, 2005; Frihart, C. R., Ed.; Forest products society: Madison, Wisconsin, USA; pp 203-210.
Weisse, B.; Affolter, C.; Stutz, A. Safety of ceramic ball heads for hip joint implants. Presented at the 90th ICB Seminar - Biomechanics of Human - Machine Systems. Trends and Applications., Warsaw, Poland, December 7-10, 2006; pp 99-101.
Zgraggen, M.; Piskoty, G.; Faller, M.; Kovacs, G.; Rössler, G.; Michel, S.; Oplatka, G.; v. Trzebiatowski, O. Analysis of track rope damage in serious incident on Schilthorn aerial ropeway. Mater. Corros. Werkst. Korros. 2006, 57 (7), 549-554. https://doi.org/10.1002/maco.200503949
Zhang, R.; Kunz, A.; Lochmatter, P.; Kovacs, G. Dielectric elastomer spring roll actuators for a portable force feedback device. In 2006 14th symposium on haptic interfaces for virtual environment and teleoperator systems, presented at the 14th symposium on haptic interfaces for virtual environment and teleoperator systems, Alexandria, Virginia, USA, March 25-26, 2006; International symposium on haptic interfaces for virtual environment and teleoperator systems (HAPTICS); IEEE: Danvers, 2006; pp 347-353. https://doi.org/10.1109/HAPTIC.2006.1627137
Zhang, R.; Lochmatter, P.; Kunz, A.; Kovacs, G. Spring roll dielectric elastomer actuators for a portable force feedback glove. In Smart structures and materials 2006: electroactive polymer actuators and devices (EAPAD). Proceedings SPIE, presented at the SPIE smart structures and materials + nondestructive evaluation and health monitoring, San Diego, California, USA, February 26 - March 2, 2006; Bar-Cohen, Y., Ed.; Proceedings of SPIE - the international society for optical engineering; SPIE: Bellingham, WA, United States, 2006; Vol. 6168, p 61681 (12 pp.). https://doi.org/10.1117/12.658524