Skip to Content

Heat resistant drone for fire fighting

FireDrone supports the fire department

Apr 23, 2023 | ANDREA SIX

Researchers from Empa and Imperial College London are developing a heat-resistant drone that can analyze the source of danger at close range in the event of a building or forest fire. This allows firefighters to optimize the strategy of a high-risk operation before entering the danger zone.

Thanks to its insulating jacket made of aerogel, the FireDrone can collect and forward data from the scene of a fire during a fire mission, even in extremely hot conditions. Image: Empa

Where others rush out, they have to go in: Firefighters put themselves in dangerous situations during rescue operations – sometimes right in the midst of a sea of flames. Last year, Swiss fire departments were called out for more than 12,000 firefighting missions. Since temperatures in a burning building can reach lethal levels of around 1,000 degrees Celsius, it is essential to avoid any unnecessary risk. Flying robots could support such missions: Researchers at Empa and Imperial College London are currently developing a heat-resistant drone that can provide initial data from the hot spot. Based on this information, the men and women of the response team can optimize their strategy before venturing into the inferno. "Before they go directly into the danger zone, the firefighters naturally don't know what exactly awaits them and what difficulties they will encounter," says Mirko Kovac, head of Empa's Sustainability Robotics Laboratory and the Aerial Robotics Lab at Imperial College London. Here, for example, drones equipped with cameras and CO2 (carbon dioxide) sensors could provide important information about the distribution of fire sources, unexpected hazards or trapped people.

Too hot for normal drones
Drone researcher David Häusermann from Empa's Sustainability Robotics lab is developing drones that can fly right into the danger zone during fire operations. Image: Empa

Drones are already being used to fight fires, taking aerial photos, lifting fire hoses onto skyscrapers or dropping extinguishing agents in remote areas, for example to contain the spread of forest fires - but only at a safe distance from the source of the fire. "To fly closer, the extreme heat generated by a fire is too great for conventional drones," says David Häusermann of Empa's Sustainability Robotics lab. Close to the fire, the frame melts and the electronics give up. "More than aerial photos of the fire site from a safe distance are not possible with commercial drones," Häusermann says. The researcher's goal, therefore, was to develop a drone that could withstand the heat and thus provide fast and accurate data from the center of the hot spot.

Ultra-light and tough
The glass-fiber-reinforced aerogel encloses the heart of the drone, protecting the power supply and electronics from heat. Image: Empa
worked with firefighters to determine the requirements of a drone in a fire mission and set out to find a material that could protectively surround the heart of the drone – the motors, batteries, sensors and electronics. He found what he was looking for with colleagues from Empa's Building Energy Materials and Components lab: The researchers led by Shanyu Zhao and Wim Malfait were able to synthesize an insulating material that can withstand high temperatures and thus make the drone more fire-resistant. When designing the FireDrone, the researchers were inspired by nature, or more precisely by animals such as penguins, arctic foxes and spittlebugs that live in extreme temperatures. All these animals have corresponding layers of fat, fur or produce their own protective layers of thermoregulating material that enable them to survive under extreme conditions.
Suitable for spacesuits
Empa researcher Shanyu Zhao of the Building Energy Materials and Components lab. Image: Empa

The material in question is an aerogel, an ultralight material consisting almost entirely of air-filled pores enclosed in a hint of polymer substance. In this case, the materials researchers chose an aerogel based on a polyimide plastic. Polyimide aerogels are also being researched by NASA, for example, for the insulation of space suits. However, Shanyu Zhao did not rely on polyimide alone to synthesize the aerogel: The composite material consists of polyimide and silica and is also reinforced with glass fibers. "Laboratory analyses have shown that this comparatively fire-resistant material is particularly well suited for use in drones," says aerogel researcher Zhao.

Flight into the inferno
At the test site of the Andelfingen Training Center of the Canton of Zurich, the FireDrone can demonstrate its capabilities in as real a situation as possible. Image: Empa

The prototype of the FireDrone has already performed well in initial tests at Empa's flight arena in Dübendorf. The flight characteristics and controllability of the drone, which is about 50 centimeters tall, were excellent even with an aerogel insulation jacket and an additional built-in cooling system, as well as aluminum cladding to reflect heat. The design, which the researchers just published in the journal "Advanced Intelligent Systems," was convincing in this "dry run."

However, whether the aircraft would also pass the test of fire had to be demonstrated by tests under conditions as real as possible, which are typical of a fire operation. The Empa team was able to use such a real-life scenario on the training grounds of the Andelfingen training center. While Stefan Keller, training coordinator for the fire department of the Canton of Zurich's building insurance, and the training center's logistics crew lit a gas fire in an oversized metal bowl, the drone pilots steered their device right into the inferno.

The result: The FireDrone prototype survived several test flights. Satisfied, drone researcher Häusermann takes stock: "Even after several flights, the electronics, thermal imaging camera and CO2 sensors of the FireDrone are undamaged and ready for further testing." A next step would now be to test the FireDrone in a fire, which, unlike the comparatively clean gas flame, shows a strong soot development.

Firefighting expert Stefan Keller is also impressed by the results: "If a drone makes the initial reconnaissance of the situation, we don't have to send firefighters into the danger zone immediately. For us, this progress is enormously interesting."

The FireDrone could also be used in extremely cold environments, such as in polar regions and on glaciers. The team has also tested the drone in a glacier tunnel in Switzerland to study how the system behaves in very cold temperatures. Discussions are already underway with potential industry partners to further develop the prototype. "The use of drones is often limited by environmental factors such as extreme temperatures," said Mirko Kovac. "With the FireDrone, we are showing a way to significantly expand the future range of applications for drones in extreme environments."

A drone for every occasion

Empa researchers are developing drones for all aspects of the environment, rep-resented as the four "elements" of fire, water, earth and air. Illustration: Empa

Editor / Media Contact
Dr. Andrea Six
Phone: +41 58 765 6133

D Häusermann, S Bodry, F Wiesemüller, A Miriyev, S Siegrist, F Fu, S Gaan, MM Koebel, WJ Malfait, S Zhao, M Kovač; FireDrone: Multi‐Environment Thermally Agnostic Aerial Robot; Advanced intelligent systems (2023); doi: 10.1002/aisy.202300101

Follow us

Empa Quarterly#79 Aerial robotics 

They fly through fire, sneak past birds, and collect data from the heart of rainforests without leaving a trace: In the current issue, we feature drones with unusual capabilities. In the planned "DroneHub," researchers want to develop and test even more versatile flying robots. And for those who prefer to keep their feet firmly on the ground, the issue also features research projects on quantum technology, medicine, building materials and green electronics.
Read the EmpaQuarterly online or download the pdf-version.

Empa Quarterly#80 Accelerating research 

The young people of today are the decision-makers of tomorrow. In this issue, the focus is therefore not (only) on materials and technologies, but also on the people who make them possible: Researchers, founders, apprentices and students. Through support at all professional and academic levels, these talents can reach new heights in science or enter the Swiss economy as urgently needed skilled workers.

Read the latest EmpaQuarterly online or download the pdf-version.

Empa Quarterly#81 Battery research 

Being able to store energy is a central pillar of a sustainable energy system, since solar and wind energy are not always available in sufficient quantities when they are needed. Good batteries are indispensable for the energy transition, and thus for a more sustainable world. Empa researchers are developing batteries for different applications, from stationary energy storage to electromobility. They are also working on analyzing and recycling end-of-life batteries.

Read the latest EmpaQuarterly online or download the pdf-version.

Empa Quarterly#82 Mining the Atmosphere 

To limit climate change, we need to compensate not only for future emissions, but also for historical ones. One solution would be the "atmospheric vacuum cleaner": we remove the excess CO2 from the atmosphere. But what do we do with it? Instead of extracting the carbon for polymers, medicines, fibers, fuels and the like from crude oil, we use atmospheric CO2. This is the simple – yet extremely challenging in technical terms – idea behind Empa's new research initiative, Mining the Atmosphere.

Read the EmpaQuarterly online or download the pdf-version.

Empa Quarterly#83 Perovskites: Versatile cristals

Over 180 years ago, a curious crystal was discovered in the Ural Mountains. Today, it has given rise to an entire class of materials that is of great interest to researchers: perovskites. What all perovskites have in common is their crystal structure, which gives them unusual properties. By changing the exact composition of the perovskite, scientists can control these properties. Empa researchers are using this promising material to develop solar cells, detectors and quantum dots.

Read the EmpaQuarterly online or download the pdf-version.

Green gliders

Their task is to monitor the condition of ecosystems, for instance in the forest floor – and crumble to dust when their work is done: Empa researchers have developed these sustainable flying sensors from potato starch and wood waste.

Let there be light

An Empa team has developed a glass brick with good insulation properties thanks to aerogel, which can even be used for load-bearing elements. This makes it possible to build aesthetic, translucent walls that reduce the need for artificial lighting inside the building.

Quick Access

Read the latest Empa Quarterly!