Amstutz, C.; Weisse, B.; Valet, S.; Haeberlin, A.; Burger, J.; Zurbuchen, A. Temperature-dependent tensile properties of polyamide 12 for the use in percutaneous transluminal coronary angioplasty balloon catheters. Biomed. Eng. Online 2021, 20 (1), 110 (19 pp.). https://doi.org/10.1186/s12938-021-00947-8

Bernath, C. M.; Valet, S.; Rossignol, F.; Weisse, B.; Fürst, A. E.; Kümmerle, J. M. The effect of reducing the bone to cast distance in an equine transfixation in cast: an ex vivo biomechanical study. Vet. Comp. Orthop. Traumatol. 2021, 34 (6), 394-400. https://doi.org/10.1055/s-0041-1733859

Brunner, A. J.; Hack, E.; Patterson, E.; Greene, R. J.; Crosbie, L. Komplementäre Schallemissionsüberwachung quasi-statischer Belastungsversuche an einem A320 Flugzeugflügel im Rahmen des Horizon 2020 EU-Projekts "Development of Integrated MEasurement Systems (DIMES)". In SCHALL 21 – Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, presented at the SCHALL 21, Berlin, Deutschland, Februar 24-25, 2021; DGZfP-Berichtsband; Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP): Berlin, 2021; Vol. 175, p V1 (9 pp.).

Brunner, A. J. Structural health and condition monitoring with acoustic emission and guided ultrasonic waves: what about long-term durability of sensors, sensor coupling and measurement chain? Appl. Sci. 2021, 11 (24), 11648 (20 pp.). https://doi.org/10.3390/app112411648

Burda, I.; Barbezat, M.; Brunner, A. J. The effect of nano- and micron-scale filler modified epoxy matrix on glass-fiber reinforced polymer insulator component behavior. Proc. Inst. Mech. Eng. Pt. L-J. Mater.-Design Appl. 2021, 235 (6), 1287-1301. https://doi.org/10.1177/14644207211000775

Ebschner, P.; Kautzsch, R.; Lämmlein, T.; Holschemacher, K.; Terrasi, G. Kopfbolzenverankerungen in mit CFK‐Bewehrung vorgespannten dünnwandigen Hochleistungsbetonfertigteilen. Beton. Stahlbetonbau 2021, 116 (7), 518-527. https://doi.org/10.1002/best.202000104

Georgopoulou, A.; Michel, S.; Vanderborght, B.; Clemens, F. Piezoresistive sensor fiber composites based on silicone elastomers for the monitoring of the position of a robot arm. Sens. Actuators A 2021, 318, 112433 (11 pp.). https://doi.org/10.1016/j.sna.2020.112433

Georgopoulou, A.; Michel, S.; Clemens, F. Sensorized robotic skin based on piezoresistive sensor fiber composites produced with injection molding of liquid silicone. Polymers 2021, 13 (8), 1226 (16 pp.). https://doi.org/10.3390/polym13081226

Khudiakova, A.; Brunner, A. J.; Wolfahrt, M.; Wettemann, T.; Godec, D.; Pinter, G. On the investigation of quasi-static crack resistance of thermoplastic tape layered composites with multiple delaminations: approaches for quantification. Composites A 2021, 149, 106484 (10 pp.). https://doi.org/10.1016/j.compositesa.2021.106484

Khudiakova, A.; Brunner, A. J.; Wolfahrt, M.; Pinter, G. Quantification approaches for fatigue crack resistance of thermoplastic tape layered composites with multiple delaminations. Materials 2021, 14 (6), 1476 (24 pp.). https://doi.org/10.3390/ma14061476

Lämmlein, T. D.; Justs, J.; Terrasi, G. P.; Lura, P. Prestressing low clinker structural concrete elements by ultra-high modulus carbon fibre reinforced polymer tendons. Mater. Struct. 2021, 54, 51 (18 pp.). https://doi.org/10.1617/s11527-021-01634-9

Michel, S. Development and operation of two test benches for the evaluation of a structural health monitoring system. In Review of aeronautical fatigue investigations in Switzerland. Swiss national review of the international committee on aeronautical fatigue and structural integrity; ZAV Centre for Aviation, ZHAW School of Engineering: sine loco, 2021; pp 27-31.

Middleton, C. A.; Lambert, P. R.; Greene, R. J.; Kupferschmid, A.; Hack, E.; Michel, S.; Harris, L.; Siebert, T.; Patterson, E. A. Using COTS technology for structural health monitoring in airframes during large-scale testing. In European test and telemetry conference. Conference Europeenne des essais et telemesure, presented at the ETTC 2021 - European test and telemetry conference, Toulouse, France, June 15-16, 2021; The European Society of Telemetry: sine loco, 2021; pp 73-76.

Mohsin, M. A. A.; Iannucci, L.; Greenhalgh, E. S. Experimental and numerical analysis of low-velocity impact of carbon fibre-based non-crimp fabric reinforced thermoplastic composites. Polymers 2021, 13 (21), 3642 (22 pp.). https://doi.org/10.3390/polym13213642

Müller, A.; Rockenfeller, R.; Damm, N.; Kosterhon, M.; Kantelhardt, S. R.; Aiyangar, A. K.; Gruber, K. Load distribution in the lumbar spine during modeled compression depends on lordosis. Frontiers Bioeng. Biotechnol. 2021, 9, 661258 (12 pp.). https://doi.org/10.3389/fbioe.2021.661258

Olaniran, S. O.; Clerc, G.; Cabane, E.; Brunner, A. J.; Rüggeberg, M. Quasi-static and fatigue performance of bonded acetylated rubberwood (Hevea brasiliensis, Müll. Arg.). Euro. J. Wood Wood Prod. 2021, 79, 49-58. https://doi.org/10.1007/s00107-020-01610-0

Rockenfeller, R.; Müller, A.; Damm, N.; Kosterhon, M.; Kantelhardt, S. R.; Frank, R.; Gruber, K. Muscle-driven and torque-driven centrodes during modeled flexion of individual lumbar spines are disparate. Biomech. Model. Mechanobiol. 2021, 20, 267-279. https://doi.org/10.1007/s10237-020-01382-9

Schneider, C.; Wiener, J.; Sperling, C.; Pinter, G.; Brunner, A. J. Zerstörungsfreie Detektion von Schädigungsprozessen bei Ermüdungsbelastung von Polymermatrix-Faserverbundwerkstoffen. In SCHALL 21 – Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen, presented at the SCHALL 21, Berlin, Deutschland, Februar 24-25, 2021; DGZfP-Berichtsband; Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP): Berlin, 2021; Vol. 175, p V3 (8 pp.).

Schrade, S. O.; Menner, M.; Shirota, C.; Winiger, P.; Stutz, A.; Zeilinger, M. N.; Lambercy, O.; Gassert, R. Knee compliance reduces peak swing phase collision forces in a lower-limb exoskeleton leg: a test bench evaluation. IEEE Trans. Biomed. Eng. 2021, 68 (2), 535-544. https://doi.org/10.1109/TBME.2020.3006787

Stankovic, D.; Bisby, L. A.; Triantafyllidis, Z.; Terrasi, G. P. Fretting fatigue performance of unidirectional, laminated carbon fibre reinforced polymer straps at elevated service temperature. Polymers 2021, 13 (19), 3437 (20 pp.). https://doi.org/10.3390/polym13193437

Stankovic, D.; Bisby, L. A.; Terrasi, G. P. Influence of temperature on the mechanical performance of unidirectional carbon fiber reinforced polymer straps. Materials 2021, 14 (8), 1903 (27 pp.). https://doi.org/10.3390/ma14081903

Struzziero, G.; Barbezat, M.; Skordos, A. A. Consolidation of continuous fibre reinforced composites in additive processes: a review. Addit. Manuf. 2021, 48, 102458 (9 pp.). https://doi.org/10.1016/j.addma.2021.102458

Vallejos Baier, R.; Contreras Raggio, J. I.; Toro Arancibia, C.; Bustamante, M.; Pérez, L.; Burda, I.; Aiyangar, A.; Vivanco, J. F. Structure-function assessment of 3D-printed porous scaffolds by a low-cost/open source fused filament fabrication printer. Mater. Sci. Eng. C 2021, 123, 111945 (14 pp.). https://doi.org/10.1016/j.msec.2021.111945

Van Damme, B.; Hannema, G.; Sales Souza, L.; Weisse, B.; Tallarico, D.; Bergamini, A. Inherent non-linear damping in resonators with inertia amplification. Appl. Phys. Lett. 2021, 119 (6), 061901 (5 pp.). https://doi.org/10.1063/5.0061826