Publications

Burda, I.; Zweiacker, K.; Arabi-Hashemi, A.; Barriobero-Vila, P.; Stutz, A.; Koller, R.; Roelofs, H.; Oberli, L.; Lembke, M.; Affolter, C.; et al. Fatigue crack propagation behavior of a micro-bainitic TRIP steel. Mater. Sci. Eng. A 2022, 840, 142898 (15 pp.). https://doi.org/10.1016/j.msea.2022.142898
Detailed Record
Busi, M.; Polatidis, E.; Malamud, F.; Kockelmann, W.; Morgano, M.; Kaestner, A.; Tremsin, A.; Kalentics, N.; Logé, R.; Leinenbach, C.; et al. Bragg edge tomography characterization of additively manufactured 316L steel. Phys. Rev. Mater. 2022, 6 (5), 053602 (8 pp.). https://doi.org/10.1103/PhysRevMaterials.6.053602
Detailed Record
Busi, M.; Polatidis, E.; Sofras, C.; Boillat, P.; Ruffo, A.; Leinenbach, C.; Strobl, M. Polarization contrast neutron imaging of magnetic crystallographic phases. Mater. Today Adv. 2022, 16, 100302 (7 pp.). https://doi.org/10.1016/j.mtadv.2022.100302
Detailed Record
Dalaee, M.; Cerrutti, E.; Dey, I.; Leinenbach, C.; Wegener, K. Parameters development for optimum deposition rate in laser DMD of stainless steel EN X3CrNiMo13-4. Lasers Manuf. Mater. Process. 2022, 9, 1-17. https://doi.org/10.1007/s40516-021-00161-3
Detailed Record
Del Giudice, L.; Wróbel, R.; Katsamakas, A. A.; Leinenbach, C.; Vassiliou, M. F. Physical modelling of reinforced concrete at a 1:40 scale using additively manufactured reinforcement cages. Earthq. Eng. Struct. Dyn. 2022, 51 (3), 537-551. https://doi.org/10.1002/eqe.3578
Detailed Record
Del Giudice, L.; Antonios, K.; Michalis, V. F.; Wrobel, R.; Leinenbach, C. Physical modelling of reinforced concrete structures using small-scale additively manufactured specimens: results of cyclic tests. In Proceedings of the international conference on natural hazards and infrastructure, ICONHIC 2022, presented at the 3rd international conference on natural hazards and infrastructure, ICONHIC 2022, Athens, Greece, July 5-7, 2022; Gazetas, G., Anastasopoulos, I., Eds.; National Technical University of Athens: Athens, 2022; p (10 pp.).
Detailed Record
Dreyer, M. J.; Taylor, W. R.; Wasmer, K.; Imwinkelried, T.; Heuberger, R.; Weisse, B.; Crockett, R. Anomalous wear behavior of UHMWPE during sliding against CoCrMo under varying cross-shear and contact pressure. Tribol. Lett. 2022, 70, 119 (13 pp.). https://doi.org/10.1007/s11249-022-01660-w
Detailed Record
Drissi-Daoudi, R.; Pandiyan, V.; Logé, R.; Shevchik, S.; Masinelli, G.; Ghasemi-Tabasi, H.; Parrilli, A.; Wasmer, K. Differentiation of materials and laser powder bed fusion processing regimes from airborne acoustic emission combined with machine learning. Virtual Phys. Prototyp. 2022, 17 (2), 181-204. https://doi.org/10.1080/17452759.2022.2028380
Detailed Record
F. Troncoso, J.; Turlo, V. Evaluating the applicability of classical and neural network interatomic potentials for modeling body centered cubic polymorph of magnesium. Model. Simul. Mater. Sci. Eng. 2022, 30 (4), 045009 (16 pp.). https://doi.org/10.1088/1361-651X/ac5ebc
Detailed Record
Ferretto, I.; Borzì, A.; Kim, D.; Della Ventura, N. M.; Hosseini, E.; Lee, W. J.; Leinenbach, C. Control of microstructure and shape memory properties of a Fe-Mn-Si-based shape memory alloy during laser powder bed fusion. Addit. Manuf. Lett. 2022, 3, 100091 (8 pp.). https://doi.org/10.1016/j.addlet.2022.100091
Detailed Record
Ferretto, I.; Kim, D.; Mohri, M.; Ghafoori, E.; Lee, W. J.; Leinenbach, C. Shape recovery performance of a (V, C)-containing Fe-Mn-Si-Ni-Cr shape memory alloy fabricated by laser powder bed fusion. J. Mater. Res. Technol. 2022, 20, 3969-3984. https://doi.org/10.1016/j.jmrt.2022.08.143
Detailed Record
Geler-Kremer, J.; Eltes, F.; Stark, P.; Stark, D.; Caimi, D.; Siegwart, H.; Jan Offrein, B.; Fompeyrine, J.; Abel, S. A ferroelectric multilevel non-volatile photonic phase shifter. Nat. Photonics 2022, 16, 491-497. https://doi.org/10.1038/s41566-022-01003-0
Detailed Record
Glerum, J. A.; De Luca, A.; Schuster, M. L.; Kenel, C.; Leinenbach, C.; Dunand, D. C. Effect of oxide dispersoids on precipitation-strengthened Al-1.7Zr (wt %) alloys produced by laser powder-bed fusion. Addit. Manuf. 2022, 56, 102933 (12 pp.). https://doi.org/10.1016/j.addma.2022.102933
Detailed Record
Gramatte, S.; Politano, O.; Xomalis, A.; Jeurgens, L.; Baras, F.; Turlo, V. Atomistic insight into heterogeneous stress states in Al2O3 nanoparticles. Presented at the Psi-k 2022, Lausanne, August 22-25, 2022.
Detailed Record
Kato, K.; Xin, Y.; Vaucher, S.; Shirai, T. Single nanosized graphene/TiOx multi-shells on TiO2 core via rapid-concomitant reaction pathway on metal oxide/polymer interface. Scr. Mater. 2022, 208, 114358 (6 pp.). https://doi.org/10.1016/j.scriptamat.2021.114358
Detailed Record
Kenel, C.; De Luca, A.; Leinenbach, C.; Dunand, D. C. High-temperature creep properties of an additively manufactured Y2O3 oxide dispersion-strengthened Ni–Cr–Al–Ti γ/γ’ superalloy. Adv. Eng. Mater. 2022. https://doi.org/10.1002/adem.202200753
Detailed Record
Kim, D.; Ferretto, I.; Leinenbach, C.; Lee, W. 3D and 4D printing of complex structures of Fe-Mn-Si-based shape memory alloy using laser powder bed fusion. Adv. Mater. Interfaces 2022, 9 (13), 2200171 (11 pp.). https://doi.org/10.1002/admi.202200171
Detailed Record
Kim, D.; Ferretto, I.; Kim, W.; Leinenbach, C.; Lee, W. Effect of post-heat treatment conditions on shape memory property in 4D printed Fe-17Mn-5Si-10Cr-4Ni shape memory alloy. Mater. Sci. Eng. A 2022, 852, 143689 (11 pp.). https://doi.org/10.1016/j.msea.2022.143689
Detailed Record
Le, V. T.; Mai, D. S.; Bui, M. C.; Wasmer, K.; Nguyen, V. A.; Dinh, D. M.; Nguyen, V. C.; Vu, D. Influences of the process parameter and thermal cycles on the quality of 308L stainless steel walls produced by additive manufacturing utilizing an arc welding source. Weld. World 2022, 66, 1565-1580. https://doi.org/10.1007/s40194-022-01330-4
Detailed Record
Le Quang, T.; Meylan, B.; Masinelli, G.; Saeidi, F.; Shevchik, S. A.; Farahani, F. V.; Wasmer, K. Smart closed-loop control of laser welding using reinforcement learning. In 12th CIRP conference on photonic technologies [LANE 2022], presented at the 12th CIRP conference on photonic technologies [LANE 2022], Fürth, September 4-8, 2022; Schmidt, M., Vollertsen, F., Colosimo, B. M., Eds.; Procedia CIRP; Elsevier: sine loco, 2022; Vol. 111, pp 479-483. https://doi.org/10.1016/j.procir.2022.08.074
Detailed Record
Masinelli, G.; Wrobel, R.; Pandiyan, V.; Wasmer, K. Multimodal signal segmentation technique based on morphological operators applied on synchronized optical data for Laser Powder Bed Fusion processes. In CIRP conference on photonic technologies, presented at the 12th CIRP conference on photonic technologies [LANE 2022], Fürth, September 4-8, 2022; Schmidt, M., Vollertsen, F., Colosimo, B. M., Eds.; Procedia CIRP; Elsevier: sine loco, 2022; Vol. 111, pp 838-843. https://doi.org/10.1016/j.procir.2022.08.094
Detailed Record
Meylan, B.; Masserey, A.; Boillat, E.; Calderon, I.; Wasmer, K. Thermal modelling and experimental validation in the perspective of tool steel laser polishing. Appl. Sci. 2022, 12 (17), 8409 (21 pp.). https://doi.org/10.3390/app12178409
Detailed Record
Mohanta, A.; Leistner, M.; Leparoux, M. Effect of plume dynamics on surface contamination during interaction of millisecond infrared fiber laser with titanium. Opt. Lasers Eng. 2022, 153, 106996 (11 pp.). https://doi.org/10.1016/j.optlaseng.2022.106996
Detailed Record
Mohri, M.; Ferretto, I.; Leinenbach, C.; Kim, D.; Lignos, D. G.; Ghafoori, E. Effect of thermomechanical treatment and microstructure on pseudo-elastic behavior of Fe-Mn-Si-Cr-Ni-(V, C) shape memory alloy. Mater. Sci. Eng. A 2022, 855, 143917 (9 pp.). https://doi.org/10.1016/j.msea.2022.143917
Detailed Record
Müller, Y. L.; Jeurgens, L. P. H.; Antušek, A.; Turlo, V. Atomistic assessment of melting point depression and enhanced interfacial diffusion of Cu in confinement with AlN. ACS Appl. Mater. Interfaces 2022, 14 (22), 26099-26115. https://doi.org/10.1021/acsami.2c01347
Detailed Record
Müller, Y. L.; Antusek, A.; Natarajan, A. R.; Jeurgens, L. P. H.; Turlo, V. Enhanced diffusion at heterogeneous interfaces in Cu/AlN nano-multilayers. Presented at the Psi-k 2022, Lausanne, August 22-25, 2022.
Detailed Record
Nakajima, K.; Leparoux, M.; Kurita, H.; Lanfant, B.; Cui, D.; Watanabe, M.; Sato, T.; Narita, F. Additive manufacturing of magnetostrictive Fe–Co alloys. Materials 2022, 15 (3), 709 (12 pp.). https://doi.org/10.3390/ma15030709
Detailed Record
Pandiyan, V.; Masinelli, G.; Claire, N.; Le-Quang, T.; Hamidi-Nasab, M.; de Formanoir, C.; Esmaeilzadeh, R.; Goel, S.; Marone, F.; Logé, R.; et al. Deep learning-based monitoring of laser powder bed fusion process on variable time-scales using heterogeneous sensing and operando X-ray radiography guidance. Addit. Manuf. 2022, 58, 103007 (15pp.). https://doi.org/10.1016/j.addma.2022.103007
Detailed Record
Pandiyan, V.; Drissi-Daoudi, R.; Shevchik, S.; Masinelli, G.; Le-Quang, T.; Logé, R.; Wasmer, K. Deep transfer learning of additive manufacturing mechanisms across materials in metal-based laser powder bed fusion process. J. Mater. Process. Technol. 2022, 303, 117531 (14 pp.). https://doi.org/10.1016/j.jmatprotec.2022.117531
Detailed Record
Pandiyan, V.; Prost, J.; Vorlaufer, G.; Varga, M.; Wasmer, K. Identification of abnormal tribological regimes using a microphone and semi-supervised machine-learning algorithm. Friction 2022, 10 (4), 583-596. https://doi.org/10.1007/s40544-021-0518-0
Detailed Record
Pandiyan, V.; Cui, D.; Le-Quang, T.; Deshpande, P.; Wasmer, K.; Shevchik, S. In situ quality monitoring in direct energy deposition process using co-axial process zone imaging and deep contrastive learning. J. Manuf. Process. 2022, 81, 1064-1075. https://doi.org/10.1016/j.jmapro.2022.07.033
Detailed Record
Pandiyan, V.; Akeddar, M.; Prost, J.; Vorlaufer, G.; Varga, M.; Wasmer, K. Long short-term memory based semi-supervised encoder—decoder for early prediction of failures in self-lubricating bearings. Friction 2022. https://doi.org/10.1007/s40544-021-0584-3
Detailed Record
Pandiyan, V.; Cui, D.; Parrilli, A.; Deshpande, P.; Masinelli, G.; Shevchik, S.; Wasmer, K. Monitoring of direct energy deposition process using manifold learning and co-axial melt pool imaging. Manuf. Lett. 2022, 33 (Suppl.), 776-785. https://doi.org/10.1016/j.mfglet.2022.07.096
Detailed Record
Perivolari, E.; Fedotov, V. A.; Parka, J.; Kaczmarek, M.; Apostolopoulos, V. Anomalous resonance frequency shift in liquid crystal-loaded THz metamaterials. Nanophotonics 2022, 11 (10), 2341-2348. https://doi.org/10.1515/nanoph-2022-0036
Detailed Record
Rao, Y.; Baruffi, C.; De Luca, A.; Leinenbach, C.; Curtin, W. A. Theory-guided design of high-strength, high-melting point, ductile, low-density, single-phase BCC high entropy alloys. Acta Mater. 2022, 237, 118132 (9 pp.). https://doi.org/10.1016/j.actamat.2022.118132
Detailed Record
Schuster, M.; De Luca, A.; Widmer, R.; Maeder, X.; Leinenbach, C. Processability, microstructure and precipitation of a Zr-modified 2618 aluminium alloy fabricated by laser powder bed fusion. J. Alloys Compd. 2022, 913, 165346 (12 pp.). https://doi.org/10.1016/j.jallcom.2022.165346
Detailed Record
Sofras, C.; Čapek, J.; Arabi-Hashemi, A.; Leinenbach, C.; Frost, M.; An, K.; Logé, R. E.; Strobl, M.; Polatidis, E. Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion. Mater. Des. 2022, 219, 110789 (14 pp.). https://doi.org/10.1016/j.matdes.2022.110789
Detailed Record
Staroń, S.; Dubiel, B.; Gola, K.; Kalemba-Rec, I.; Gajewska, M.; Pasiowiec, H.; Wróbel, R.; Leinenbach, C. Quantitative microstructural characterization of precipitates and oxide inclusions in inconel 625 superalloy additively manufactured by L-PBF method. Metall. Mater. Trans. A 2022, 53, 2459-2479. https://doi.org/10.1007/s11661-022-06679-1
Detailed Record
Szmyt, W.; Guerra-Nuñez, C.; Huber, L.; Dransfeld, C.; Utke, I. Atomic layer deposition on porous substrates: from general formulation to fibrous substrates and scaling laws. Chem. Mater. 2022, 34 (1), 203-216. https://doi.org/10.1021/acs.chemmater.1c03164
Detailed Record
Szmyt, W.; Geler-Kremer, J.; Abel, S.; Fompeyrine, J.; Hoffmann, P. High vacuum chemical vapor deposition: high growth rate ALD-like film synthesis and epitaxial CVD for integrated photonics. Presented at the ALD/ALE conference 2022, Ghent, June 26-29, 2022.
Detailed Record
Troncoso, J. F.; Lorenzin, G.; Cancellieri, C.; Liyanage, M.; Turlo, V. In-plane strain effect on interface stress in Cu/W nano-multilayers. Presented at the Psi-k 2022, Lausanne, August 22-25, 2022.
Detailed Record
Berger, L.; Jurczyk, J.; Madajska, K.; Szymańska, I. B.; Hoffmann, P.; Utke, I. Room temperature direct electron beam lithography in a condensed copper carboxylate. Micromachines 2021, 12 (5), 580 (14 pp.). https://doi.org/10.3390/mi12050580
Detailed Record
Busi, M.; Kalentics, N.; Morgano, M.; Griffiths, S.; Tremsin, A. S.; Shinohara, T.; Logé, R.; Leinenbach, C.; Strobl, M. A parametric neutron Bragg edge imaging study of additively manufactured samples treated by laser shock peening. Sci. Rep. 2021, 11 (1), 14919 (9 pp.). https://doi.org/10.1038/s41598-021-94455-3
Detailed Record
Busi, M.; Kalentics, N.; Morgano, M.; Griffiths, S.; Tremsin, A. S.; Shinohara, T.; Logé, R.; Leinenbach, C.; Strobl, M. Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging. Addit. Manuf. 2021, 39, 101848 (9 pp.). https://doi.org/10.1016/j.addma.2021.101848
Detailed Record
Caesarendra, W.; Triwiyanto, T.; Pandiyan, V.; Glowacz, A.; Permana, S. D. H.; Tjahjowidodo, T. A cnn prediction method for belt grinding tool wear in a polishing process utilizing 3-axes force and vibration data. Electronics 2021, 10 (12), 1429 (30 pp.). https://doi.org/10.3390/electronics10121429
Detailed Record
Cann, J. L.; De Luca, A.; Dunand, D. C.; Dye, D.; Miracle, D. B.; Oh, H. S.; Olivetti, E. A.; Pollock, T. M.; Poole, W. J.; Yang, R.; et al. Sustainability through alloy design: challenges and opportunities. Prog. Mater. Sci. 2021, 117, 100722 (33 pp.). https://doi.org/10.1016/j.pmatsci.2020.100722
Detailed Record
Chen, X.; Sastre, J.; Rumpel, M.; Flegler, A.; Singhania, A.; Balta Bonner, J.; Hoffmann, P.; Romanyuk, Y. E. Photonic methods for rapid crystallization of LiMn2O4 cathodes for solid-state thin-film batteries. J. Power Sources 2021, 495, 229424 (9 pp.). https://doi.org/10.1016/j.jpowsour.2020.229424
Detailed Record
Cui, D.; Lanfant, B.; Leparoux, M.; Favre, S. Additive manufacturing of Ti-Nb dissimilar metals by laser metal deposition. In Industrializing additive manufacturing. Proceedings of AMPA2020, presented at the 2nd AMPA conference (additive manufacturing in products and applications), Zürich, Switzerland, September 1-3, 2020; Meboldt, M., Klahn, C., Eds.; Springer: Cham, 2021; pp 96-111. https://doi.org/10.1007/978-3-030-54334-1_8
Detailed Record
De Luca, A.; Kenel, C.; Griffiths, S.; Joglekar, S. S.; Leinenbach, C.; Dunand, D. C. Microstructure and defects in a Ni-Cr-Al-Ti γ/γ' model superalloy processed by laser powder bed fusion. Mater. Des. 2021, 201, 109531 (14 pp.). https://doi.org/10.1016/j.matdes.2021.109531
Detailed Record
De Luca, A.; Kenel, C.; Pado, J.; Joglekar, S. S.; Dunand, D. C.; Leinenbach, C. Thermal stability and influence of Y2O3 dispersoids on the heat treatment response of an additively manufactured ODS Ni-Cr-Al-Ti γ/γ′ superalloy. J. Mater. Res. Technol. 2021, 15, 2883-2898. https://doi.org/10.1016/j.jmrt.2021.09.076
Detailed Record
Del Giudice, L.; Wrobel, R.; Katsamakas, A.; Leinenbach, C.; Vassiliou, M. Cyclic testing of 1:40 scale cantilever RC elements with digitally manufactured reinforcement. In Compdyn 2021 proceedings, presented at the COMPDYN 2021. 8th ECCOMAS thematic conference on computational methods in structural dynamics and earthquake engineering, Athens, Greece, June 27-30, 2021; Papadrakakis, M., Fragiadakis, M., Eds.; Institute of Research & Development for Computational Methods in Engineering Sciences: sine loco, 2021; p 174550 (11 pp.).
Detailed Record
Deshpande, P.; Pandiyan, V.; Meylan, B.; Wasmer, K. Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope. Wear 2021, 476, 203622 (12 pp.). https://doi.org/10.1016/j.wear.2021.203622
Detailed Record
Ferretto, I.; Kim, D.; Della Ventura, N. M.; Shahverdi, M.; Lee, W.; Leinenbach, C. Laser powder bed fusion of a Fe–Mn–Si shape memory alloy. Addit. Manuf. 2021, 46, 102071 (12 pp.). https://doi.org/10.1016/j.addma.2021.102071
Detailed Record
Garg, P.; Pan, Z.; Turlo, V.; Rupert, T. J. Segregation competition and complexion coexistence within a polycrystalline grain boundary network. Acta Mater. 2021, 218, 117213 (14 pp.). https://doi.org/10.1016/j.actamat.2021.117213
Detailed Record
Geler-Kremer, J.; Eltes, F.; Stark, P.; Sharma, A.; Caimi, D.; Offrein, B. J.; Fompeyrine, J.; Abel, S. A non-volatile optical memory in silicon photonics. In Proceedings optical fiber communication conference (OFC) 2021, presented at the Optical fiber communications conference 2021, San Francisco, California, USA, June 6-11, 2021; OSA: Washington, DC, 2021; p Th4I.2 (3 pp.). https://doi.org/10.1364/OFC.2021.Th4I.2
Detailed Record
Giudice, L. D.; Wrobel, R.; Leinenbach, C.; Vassiliou, M. F. Physical modelling of rc structures through digitally manufactured small-scale specimens for centrifuge testing. In Concrete structures: new trends for eco-efficiency and performance. Proceedings of the fib symposium 2021, presented at the fib symposium 2021, Lisbon, June 14-16, 2021; Júlio, E., Valença, J., Louro, S. S., Eds.; fib symposium proceedings; fib: Lausanne, 2021; pp 2317-2326.
Detailed Record
Gramatte, S.; Politano, O.; Turlo, V. Closing the gap from nano- to microscale in metal 3D printing: a molecular dynamics (MD) workflow for accessing the properties of solid-liquid interfaces. Presented at the Swiss nano convention 2021, Basel, June 24-25, 2021.
Detailed Record
Greminger, J. A. S.; Gramatte, S.; Politano, O.; Baras, F.; Turlo, V. Accessing the structure of γ-Al2O3 nanoparticles (NPs) with the charge-optimized many-body interatomic potential. Presented at the Swiss nano convention 2021, Basel, June 24-25, 2021.
Detailed Record
Griffiths, S.; Ghasemi-Tabasi, H.; De Luca, A.; Pado, J.; Joglekar, S. S.; Jhabvala, J.; Logé, R. E.; Leinenbach, C. Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC. Mater. Charact. 2021, 171, 110815 (13 pp.). https://doi.org/10.1016/j.matchar.2020.110815
Detailed Record
Kenel, C.; De Luca, A.; Joglekar, S. S.; Leinenbach, C.; Dunand, D. C. Evolution of Y2O3 dispersoids during laser powder bed fusion of oxide dispersion strengthened Ni-Cr-Al-Ti γ/γ’ superalloy. Addit. Manuf. 2021, 47, 102224 (15 pp.). https://doi.org/10.1016/j.addma.2021.102224
Detailed Record
Kim, D.; Ferretto, I.; Jeon, J. B.; Leinenbach, C.; Lee, W. Formation of metastable bcc-δ phase and its transformation to fcc-γ in laser powder bed fusion of Fe–Mn–Si shape memory alloy. J. Mater. Res. Technol. 2021, 14, 2782-2788. https://doi.org/10.1016/j.jmrt.2021.08.119
Detailed Record
Le-Quang, T.; Faivre, N.; Vakili-Farahani, F.; Wasmer, K. Energy-efficient laser welding with beam oscillating technique - a parametric study. J. Clean. Prod. 2021, 313, 127796 (11 pp.). https://doi.org/10.1016/j.jclepro.2021.127796
Detailed Record
Masinelli, G.; Shevchik, S. A.; Pandiyan, V.; Quang-Le, T.; Wasmer, K. Artificial intelligence for monitoring and control of metal additive manufacturing. In Industrializing additive manufacturing. Proceedings of AMPA2020, presented at the AMPA 2020. International conference on additive manufacturing in products and applications, Zürich, Switzerland, September 1-3, 2020; Meboldt, M., Klahn, C., Eds.; Springer: Cham, 2021; pp 205-220. https://doi.org/10.1007/978-3-030-54334-1_15
Detailed Record
Meylan, B.; Shevchik, S. A.; Parvaz, D.; Mosaddeghi, A.; Simov, V.; Wasmer, K. Acoustic emission and machine learning for in situ monitoring of a gold-copper ore weakening by electric pulse. J. Clean. Prod. 2021, 280, 124348 (12 pp.). https://doi.org/10.1016/j.jclepro.2020.124348
Detailed Record
Mihai, S.; Chioibasu, D.; Mahmood, M. A.; Duta, L.; Leparoux, M.; Popescu, A. C. Real-time defects analyses using high-speed imaging during aluminum magnesium alloy laser welding. Metals 2021, 11 (11), 1877 (16 pp.). https://doi.org/10.3390/met11111877
Detailed Record
Muller, Y.; Politano, O.; Jeurgens, L.; Marzari, N.; Turlo, V. Atomistic modeling of Cu/AlNnano-multilayers. Presented at the Swiss nano convention 2021, Basel, June 24-25, 2021.
Detailed Record
Nayak, J. K.; Chaudhuri, P. R.; Sahoo, P. K. Stable hybrid plasmonic directional coupler based on an embedded silver nanostructure waveguide. Appl. Opt. 2021, 60 (25), 7603-7610. https://doi.org/10.1364/AO.431598
Detailed Record
Pandiyan, V.; Drissi-Daoudi, R.; Shevchik, S.; Masinelli, G.; Le-Quang, T.; Logé, R.; Wasmer, K. Semi-supervised monitoring of laser powder bed fusion process based on acoustic emissions. Virtual Phys. Prototyp. 2021, 16 (4), 481-497. https://doi.org/10.1080/17452759.2021.1966166
Detailed Record
Rowthu, S.; Deshpande, P.; Annamalai, A.; Hoffmann, P. Harnessing nano oil reservoir network for generating low friction and wear in self-mating alumina. Mater. Des. 2021, 206, 109821 (13 pp.). https://doi.org/10.1016/j.matdes.2021.109821
Detailed Record
Schuster, M.; Leinenbach, C.; Hoffmann, P. Development of high strength aluminum alloys for laser-based additive manufacturing. Presented at the EDMX research day 2021, Lausanne, CH, February 10, 2021.
Detailed Record
Schuster, M.; De Luca, A.; Mathur, A.; Hosseini, E.; Leinenbach, C. Precipitation in a 2xxx series Al-Cu-Mg-Zr alloy fabricated by laser powder bed fusion. Mater. Des. 2021, 211, 110131 (15 pp.). https://doi.org/10.1016/j.matdes.2021.110131
Detailed Record
Shevchik, S.; Nguendon Kenhagho, H.; Le-Quang, T.; Faivre, N.; Meylan, B.; Guzman, R.; Cattin, P. C.; Zam, A.; Wasmer, K. Machine learning monitoring for laser osteotomy. J. Biophoton. 2021, 14 (4), e202000352 (11 pp.). https://doi.org/10.1002/jbio.202000352
Detailed Record
Shevchik, S. A.; Zanoli, S.; Saeidi, F.; Meylan, B.; Flück, G.; Wasmer, K. Monitoring of friction-related failures using diffusion maps of acoustic time series. Mech. Syst. Signal Process. 2021, 148, 107172 (14 pp.). https://doi.org/10.1016/j.ymssp.2020.107172
Detailed Record
Shu, S.; De Luca, A.; Dunand, D. C.; Seidman, D. N. Effects of W micro-additions on precipitation kinetics and mechanical properties of an Al–Mn–Mo–Si–Zr–Sc–Er alloy. Mater. Sci. Eng. A 2021, 803, 140550 (6 pp.). https://doi.org/10.1016/j.msea.2020.140550
Detailed Record
Shu, S.; De Luca, A.; Dunand, D. C.; Seidman, D. N. Individual and synergistic effects of Mn and Mo micro-additions on precipitation and strengthening of a dilute Al-Zr-Sc-Er-Si alloy. Mater. Sci. Eng. A 2021, 800, 140288 (14 pp.). https://doi.org/10.1016/j.msea.2020.140288
Detailed Record
Stark, P.; Weiss, J.; Dangel, R.; Horst, F.; Geler-Kremer, J.; Offrein, B. J. High-performance neuromorphic computing based on photonic technologies. In Optical fiber communication conference (OFC) 2021, presented at the Optical fiber communications conference 2021, Washington, DC, June 6-11, 2021; OSA: Washington, DC, 2021; p Tu5H.4 (3 pp.). https://doi.org/10.1364/OFC.2021.Tu5H.4
Detailed Record
Szmyt, W.; Geler-Kremer, J.; Borzì, A.; Abel, S.; Fompeyrine, J.; Hoffmann, P. High vacuum chemical vapor deposition of BaTiO3 films for integrated photonic devices. Presented at the Department day: advanced materials and surfaces, Dübendorf, CH, September 15, 2021.
Detailed Record
Szmyt, W.; Guerra-Nuñez, C.; Dransfeld, C.; Utke, I. Solving the inverse Knudsen problem: gas diffusion in random fibrous media. J. Membr. Sci. 2021, 620, 118728 (18 pp.). https://doi.org/10.1016/j.memsci.2020.118728
Detailed Record
Tosoratti, E.; Incaviglia, I.; Liashenko, O.; Leinenbach, C.; Zenobi-Wong, M. Additively manufactured semiflexible titanium lattices as hydrogel reinforcement for biomedical implants. Adv. NanoBiomed Res. 2021, 1 (1), 2000031 (12 pp.). https://doi.org/10.1002/anbr.202000031
Detailed Record
Troncoso, J. F.; Manish, J.; Turlo, V. Applicability of empirical and neural network interatomic potentials to modeling metastable body centered cubic magnesium. Presented at the Swiss nano convention 2021, Basel, June 24-25, 2021.
Detailed Record
Yang, Y.; Arabi-Hashemi, A.; Leinenbach, C.; Shahverdi, M. Influence of thermal treatment conditions on recovery stress formation in an FeMnSi-SMA. Mater. Sci. Eng. A 2021, 802, 140694 (11 pp.). https://doi.org/10.1016/j.msea.2020.140694
Detailed Record
Affolter, C.; Thorwarth, G.; Arabi-Hashemi, A.; Müller, U.; Weisse, B. Ductile compressive behavior of biomedical alloys. Metals 2020, 10 (1), 60 (11 pp.). https://doi.org/10.3390/met10010060
Detailed Record
Arabi-Hashemi, A.; Maeder, X.; Figi, R.; Schreiner, C.; Griffiths, S.; Leinenbach, C. 3D magnetic patterning in additive manufacturing via site-specific in-situ alloy modification. Appl. Mater. Today 2020, 18, 100512 (9 pp.). https://doi.org/10.1016/j.apmt.2019.100512
Detailed Record
Arabi-Hashemi, A.; Polatidis, E.; Smid, M.; Panzner, T.; Leinenbach, C. Grain orientation dependence of the forward and reverse fcc ↔ hcp transformation in FeMnSi-based shape memory alloys studied by in situ neutron diffraction. Mater. Sci. Eng. A 2020, 782, 139261 (11 pp.). https://doi.org/10.1016/j.msea.2020.139261
Detailed Record
Bacak, M.; Valsecchi, J.; Čapek, J.; Polatidis, E.; Kaestner, A.; Arabi-Hashemi, A.; Kruk, I.; Leinenbach, C.; Long, A. M.; Tremsin, A.; et al. Neutron dark-field imaging applied to porosity and deformation-induced phase transitions in additively manufactured steels. Mater. Des. 2020, 195, 109009 (9 pp.). https://doi.org/10.1016/j.matdes.2020.109009
Detailed Record
Berger, L.; Jurczyk, J.; Madajska, K.; Edwards, T. E. J.; Szymańska, I.; Hoffmann, P.; Utke, I. High-purity copper structures from a perfluorinated copper carboxylate using focused electron beam induced deposition and post-purification. ACS Appl. Electron. Mater. 2020, 2 (7), 1989-1996. https://doi.org/10.1021/acsaelm.0c00282
Detailed Record
Borzì, A.; Dolabella, S.; Szmyt, W.; Geler-Kremer, J.; Abel, S.; Fompeyrine, J.; Hoffmann, P.; Neels, A. Microstructure analysis of epitaxial BaTiO3 thin films on SrTiO3-buffered Si: strain and dislocation density quantification using HRXRD methods. Materialia 2020, 14, 100953 (9 pp.). https://doi.org/10.1016/j.mtla.2020.100953
Detailed Record
Cui, D.; Mohanta, A.; Leparoux, M.; Hoffmann, P.; Favre, S.; Tortorici, P. 3D printing: fabrication of metal matrix composite by laser metal deposition and direct dry injection of nanopowders. Presented at the Medtronic science & technology online conference, Minneapolis, USA, October 19-22, 2020.
Detailed Record
Cui, D.; Mohanta, A.; Leparoux, M. Interface control in additive manufacturing of dissimilar metals forming intermetallic compounds - Fe-Ti as a model system. Materials 2020, 13 (21), 4747 (13 pp.). https://doi.org/10.3390/ma13214747
Detailed Record
Dalaee, M. T.; Gloor, L.; Leinenbach, C.; Wegener, K. Experimental and numerical study of the influence of induction heating process on build rates Induction Heating-assisted laser Direct Metal Deposition (IH-DMD). Surf. Coat. Technol. 2020, 384, 125275 (12 pp.). https://doi.org/10.1016/j.surfcoat.2019.125275
Detailed Record
Dalaee, M.; Cheaitani, F.; Arabi-Hashemi, A.; Rohrer, C.; Weisse, B.; Leinenbach, C.; Wegener, K. Feasibility study in combined direct metal deposition (DMD) and plasma transfer arc welding (PTA) additive manufacturing. Int. J. Adv. Manuf. Technol. 2020, 106 (9-10), 4375-4389. https://doi.org/10.1007/s00170-019-04917-2
Detailed Record
De Luca, A.; Shu, S.; Seidman, D. N. Effect of microadditions of Mn and Mo on dual L12- and α-precipitation in a dilute Al-Zr-Sc-Er-Si alloy. Mater. Charact. 2020, 169, 110585 (12 pp.). https://doi.org/10.1016/j.matchar.2020.110585
Detailed Record
De Luca, A.; Seidman, D. N.; Dunand, D. C. Mn and Mo additions to a dilute Al-Zr-Sc-Er-Si-based alloy to improve creep resistance through solid-solution- and precipitation-strengthening. Acta Mater. 2020, 194, 60-67. https://doi.org/10.1016/j.actamat.2020.04.022
Detailed Record
Geler-Kremer, J.; Posadas, A. B.; Demkov, A. A. Preparation of clean MgO surface by oxygen plasma: comparison with standard substrate cleaning procedures. J. Vac. Sci. Technol. B 2020, 38 (6), 062201 (11 pp.). https://doi.org/10.1116/6.0000371
Detailed Record
Giudice, L. D.; Wrobel, R.; Leinenbach, C.; Vassiliou, M. F. Static testing of additevly manufactured microreinforced concrete specimens for statistical structural model validation at a small scale. In 8AESE abstract book, presented at the 8th international conference on advances in experimental structural engineering (8AESE), Christchurch, New Zealand, February 3-5, 2020; Conferences & Events Ltd: sine loco, 2020. https://doi.org/10.3929/ethz-b-000397086
Detailed Record
Giudice, L. D.; Wrobel, R.; Leinenbach, C.; Vassiliou, M. F. Testing of additively manufactured small scale RC specimens for statistical validation of structural models in earthquake engineering. In Proceedings of the XI international conference on structural dynamics (EURODYN 2020), presented at the EURODYN 2020: XI international conference on structural dynamics, Athens, Greece, November 23-26, 2020; Papadrakakis, M., Fragiadakis, M., Papadimitriou, C., Eds.; European Association for Structural Dynamics (EASD), 2020; Vol. 2, pp 3313-3323. https://doi.org/10.47964/1120.9271.19825
Detailed Record
Griffiths, S.; Croteau, J. R.; Rossell, M. D.; Erni, R.; De Luca, A.; Vo, N. Q.; Dunand, D. C.; Leinenbach, C. Coarsening- and creep resistance of precipitation-strengthened Al-Mg-Zr alloys processed by selective laser melting. Acta Mater. 2020, 188, 192-202. https://doi.org/10.1016/j.actamat.2020.02.008
Detailed Record
Griffiths, S.; Ghasemi Tabasi, H.; Ivas, T.; Maeder, X.; De Luca, A.; Zweiacker, K.; Wróbel, R.; Jhabvala, J.; Logé, R. E.; Leinenbach, C. Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy. Addit. Manuf. 2020, 36, 101443 (15 pp.). https://doi.org/10.1016/j.addma.2020.101443
Detailed Record
Kalentics, N.; Ortega Varela de Seijas, M.; Griffiths, S.; Leinenbach, C.; Logé, R. E. 3D laser shock peening - a new method for improving fatigue properties of selective laser melted parts. Addit. Manuf. 2020, 33, 101112 (12 pp.). https://doi.org/10.1016/j.addma.2020.101112
Detailed Record
Kenel, C.; Davenport, T.; Li, X.; Shah, R. N.; Dunand, D. C. Kinetics of alloy formation and densification in Fe-Ni-Mo microfilaments extruded from oxide- or metal-powder inks. Acta Mater. 2020, 193, 51-60. https://doi.org/10.1016/j.actamat.2020.04.038
Detailed Record
Kwon, H.; Saarna, M.; Leparoux, M. Effects of processing parameters on mechanical properties of silicon carbide nanoparticle-reinforced aluminium alloy matrix composite materials. J. Nanosci. Nanotechnol. 2020, 20 (10), 6482-6488. https://doi.org/10.1166/jnn.2020.17884
Detailed Record
Kürnsteiner, P.; Bajaj, P.; Gupta, A.; Wilms, M. B.; Weisheit, A.; Li, X.; Leinenbach, C.; Gault, B.; Jägle, E. A.; Raabe, D. Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys. Addit. Manuf. 2020, 32, 100910 (13 pp.). https://doi.org/10.1016/j.addma.2019.100910
Detailed Record
Le Dantec, M.; Abdulstaar, M.; Leparoux, M.; Hoffmann, P. Epitaxial growth of silicon on silicon wafers by direct laser melting. Materials 2020, 13 (21), 4728 (8 pp.). https://doi.org/10.3390/ma13214728
Detailed Record
Le Dantec, M.; Güniat, L.; Leistner, M.; Figi, R.; Bleiner, D.; Leparoux, M.; Hoffmann, P. Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon. Powder Technol. 2020, 361, 704-710. https://doi.org/10.1016/j.powtec.2019.11.052
Detailed Record
Li, X.; Zweiacker, K.; Grolimund, D.; Ferreira Sanchez, D.; Spierings, A. B.; Leinenbach, C.; Wegener, K. In situ and ex situ characterization of the microstructure formation in Ni-Cr-Si alloys during rapid solidification - toward alloy design for laser additive manufacturing. Materials 2020, 13 (9), 2192 (14 pp.). https://doi.org/10.3390/ma13092192
Detailed Record
Lindström, V.; Liashenko, O.; Zweiacker, K.; Derevianko, S.; Morozovych, V.; Lyashenko, Y.; Leinenbach, C. Laser powder bed fusion of metal coated copper powders. Materials 2020, 13 (16), 3493 (12 pp.). https://doi.org/10.3390/MA13163493
Detailed Record
Masinelli, G.; Le-Quang, T.; Zanoli, S.; Wasmer, K.; Shevchik, S. A. Adaptive laser welding control: a reinforcement learning approach. IEEE Access 2020, 8, 103803-103814. https://doi.org/10.1109/ACCESS.2020.2998052
Detailed Record
Meylan, B.; Calderon, I.; Tri Le, Q.; Wasmer, K. Investigations of surface defects during laser polishing of tool steel. In 11th CIRP conference on photonic technologies [LANE 2020], presented at the LANE 2020, Erlangen, Germany, September 7-10, 2020; Schmidt, M., Vollertsen, F., Govekar, E., Eds.; Procedia CIRP; Elsevier: sine loco, 2020; Vol. 94, pp 942-946. https://doi.org/10.1016/j.procir.2020.09.092
Detailed Record
Meylan, B.; Le-Quang, T.; Olbinado, M. P.; Rack, A.; Shevchik, S. A.; Wasmer, K. Re-solidification dynamics and microstructural analysis of laser welded aluminium. Int. J. Mater. Res. 2020, 111 (1), 17-22. https://doi.org/10.3139/146.111838
Detailed Record
Mohanta, A.; Leistner, M.; Leparoux, M. Influence of temporal and spectral profiles of lasers on weld quality of titanium. Opt. Lasers Eng. 2020, 134, 106173 (11 pp.). https://doi.org/10.1016/j.optlaseng.2020.106173
Detailed Record
Mohanta, A.; Thareja, R. K. Plasma synthesis of nanomaterials. In 21st century nanoscience. A handbook. Design strategies for synthesis and fabrication; Sattler, K. D., Ed.; Vol. 2; CRC Press: Boca Raton, 2020; p 2 (19 pp.).
Detailed Record
Mouhamadali, F.; Equis, S.; Saeidi, F.; Best, J. P.; Cantoni, M.; Hoffmann, P.; Wasmer, K. Nanosecond pulsed laser-processing of CVD diamond. Opt. Lasers Eng. 2020, 126, 105917 (12 pp.). https://doi.org/10.1016/j.optlaseng.2019.105917
Detailed Record
Offrein, B. J.; Geler-Kremer, J.; Weiss, J.; Dangel, R.; Stark, P.; Sharma, A.; Abel, S.; Horst, F. Prospects for photonic implementations of neuromorphic devices and systems. In 2020 IEEE international electron devices meeting, presented at the 66th Annual IEEE international electron devices meeting (IEDM), San Francisco, CA, USA, December 12-18, 2020; Technical Digest; IEEE, 2020; pp 139-142. https://doi.org/10.1109/IEDM13553.2020.9371915
Detailed Record
Pandiyan, V.; Drissi-Daoudi, R.; Shevchik, S.; Masinelli, G.; Logé, R.; Wasmer, K. Analysis of time, frequency and time-frequency domain features from acoustic emissions during laser powder-bed fusion process. In 11th CIRP conference on photonic technologies [LANE 2020], presented at the LANE 2020, Erlangen, Germany, September 7-10, 2020; Schmidt, M., Vollertsen, F., Govekar, E., Eds.; Procedia CIRP; Elsevier: sine loco, 2020; Vol. 94, pp 392-397. https://doi.org/10.1016/j.procir.2020.09.152
Detailed Record
Pandiyan, V.; Shevchik, S.; Wasmer, K.; Castagne, S.; Tjahjowidodo, T. Modelling and monitoring of abrasive finishing processes using artificial intelligence techniques: a review. J. Manuf. Process. 2020, 57, 114-135. https://doi.org/10.1016/j.jmapro.2020.06.013
Detailed Record
Pandiyan, V.; Caesarendra, W.; Glowacz, A.; Tjahjowidodo, T. Modelling of material removal in abrasive belt grinding process: a regression approach. Symmetry 2020, 12 (1), 99 (27 pp.). https://doi.org/10.3390/SYM12010099
Detailed Record
Polatidis, E.; Čapek, J.; Arabi-Hashemi, A.; Leinenbach, C.; Strobl, M. High ductility and transformation-induced-plasticity in metastable stainless steel processed by selective laser melting with low power. Scr. Mater. 2020, 176, 53-57. https://doi.org/10.1016/j.scriptamat.2019.09.035
Detailed Record
Shevchik, S.; Le-Quang, T.; Meylan, B.; Vakili Farahani, F.; Olbinado, M. P.; Rack, A.; Masinelli, G.; Leinenbach, C.; Wasmer, K. Supervised deep learning for real-time quality monitoring of laser welding with X-ray radiographic guidance. Sci. Rep. 2020, 10, 3389 (12 pp.). https://doi.org/10.1038/s41598-020-60294-x
Detailed Record
Shu, S.; De Luca, A.; Seidman, D. N.; Dunand, D. C. Effects of Mn and Mo micro-additions on Al-Zr-Sc-Er-Si mechanical properties. In Light metals 2020, presented at the Aluminium alloys, processing and characterization symposium held at TMS 2020, San Diego, USA, February 23-27, 2020; Tomsett, A., Ed.; Minerals, metals and materials series; Springer: Cham, 2020; pp 312-317. https://doi.org/10.1007/978-3-030-36408-3_45
Detailed Record
Stark, P.; Geler-Kremer, J.; Eltes, F.; Caimi, D.; Fompeyrine, J.; Offrein, B. J.; Abel, S. Novel electro-optic components for integrated photonic neural networks. In Optical fiber communications conference (OFC) 2020, presented at the Optical fiber communications conference 2020, San Diego, USA, March 8-12, 2020; OSA: Washington, DC, 2020; p M2I.4 (3 pp.). https://doi.org/10.1364/OFC.2020.M2I.4
Detailed Record
Turlo, V.; Rupert, T. J. Interdependent linear complexion structure and dislocation mechanics in Fe-Ni. Crystals 2020, 10 (12), 1-11. https://doi.org/10.3390/cryst10121128
Detailed Record
Violakis, G.; Le-Quang, T.; Shevchik, S. A.; Wasmer, K. Sensitivity analysis of acoustic emission detection using fiber bragg gratings with different optical fiber diameters. Sensors 2020, 20 (22), 6511 (11 pp.). https://doi.org/10.3390/s20226511
Detailed Record
Zieliński, T. G.; Opiela, K. C.; Pawłowski, P.; Dauchez, N.; Boutin, T.; Kennedy, J.; Trimble, D.; Rice, H.; Van Damme, B.; Hannema, G.; et al. Reproducibility of sound-absorbing periodic porous materials using additive manufacturing technologies: round robin study. Addit. Manuf. 2020, 36, 101564 (24 pp.). https://doi.org/10.1016/j.addma.2020.101564
Detailed Record
Cui, D.; Mohanta, A.; Leparoux, M.; Hoffmann, P.; Favre, S.; Tortorici, P. Quest project. Direct 3D printing of dissimilar materials. Presented at the Medtronic science & technology conference, Minneapolis, USA, October 1-3, 2019.
Detailed Record
Czaderski, C.; Shahverdi, M.; Ghafoori, E.; Motavalli, M.; Leinenbach, C.; Arabi-Hashemi, A.; Michels, J.; Scherer, J. The development of memory steel at Empa. In Proceedings of SMAR 2019, fifth conference on smart monitoring, assessment and rehabilitation of civil structures, presented at the SMAR 2019 - 5th conference on smart monitoring, assessment and rehabilitation of civil structures, Potsdam, Germany, August 27-29, 2019; SMAR proceedings; 2019; p (8 pp.).
Detailed Record
De Luca, A.; Seidman, D. N.; Dunand, D. C. Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys. Acta Mater. 2019, 165, 1-14. https://doi.org/10.1016/j.actamat.2018.11.031
Detailed Record
Ivas, T.; Balaban, M.; Dosen, V.; Miyawaki, J.; Ito, K.; Vrankovic, D.; Ostojic, G.; Zeljkovic, S. Optimization of the calcination temperature for the solvent-deficient synthesis of nanocrystalline gamma-alumina. Chem. Pap. 2019, 73 (4), 901-907. https://doi.org/10.1007/s11696-018-0637-x
Detailed Record
Kalentics, N.; Sohrabi, N.; Tabasi, H. G.; Griffiths, S.; Jhabvala, J.; Leinenbach, C.; Burn, A.; Logé, R. E. Healing cracks in selective laser melting by 3D laser shock peening. Addit. Manuf. 2019, 30, 100881 (10 pp.). https://doi.org/10.1016/j.addma.2019.100881
Detailed Record
Kato, K.; Vaucher, S.; Hoffmann, P.; Xin, Y.; Shirai, T. A novel single-mode microwave assisted synthesis of metal oxide as visible-light photocatalyst. Mater. Lett. 2019, 235 (000448000700031), 125-128. https://doi.org/10.1016/j.matlet.2018.09.132
Detailed Record
Korakas, N.; Violakis, G.; Mader, A.; Pissadakis, S. Azimuthal alignment method for optimizing Bragg grating inscription in photonic crystal fibers. IEEE Photonics Technol. Lett. 2019, 31 (11), 857-860. https://doi.org/10.1109/LPT.2019.2910461
Detailed Record
Lanfant, B.; Bär, F.; Mohanta, A.; Leparoux, M. Fabrication of metal matrix composite by laser metal deposition—a new process approach by direct dry injection of nanopowders. Materials 2019, 12 (21), 3584 (16 pp.). https://doi.org/10.3390/ma12213584
Detailed Record
Lanfant, B.; Leconte, Y.; Debski, N.; Bonnefont, G.; Pinault, M.; Mayne-L′Hermite, M.; Habert, A.; Jorand, Y.; Garnier, V.; Fantozzi, G.; et al. Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites. Ceram. Int. 2019, 45 (2), 2566-2575. https://doi.org/10.1016/j.ceramint.2018.10.187
Detailed Record
Liashenko, O.; Derevianko, S.; Morozovych, V.; Bouvard, D.; Lyashenko, Y. The solid state reactions in powder soldering mixtures of Cu-Sn system. Presented at the Poudres'2019: matériaux frittés et fabrication additive, Grenoble, May 22-24, 2019.
Detailed Record
Lyashenko, Y. O.; Liashenko, O. Y.; Morozovich, V. V. New approach to effective diffusion coefficient evaluation in the nanostructured two-phase media. Appl. Nanosci. 2019, 9 (5), 1025-1036. https://doi.org/10.1007/s13204-018-0731-y
Detailed Record
Michi, R. A.; De Luca, A.; Seidman, D. N.; Dunand, D. C. Effects of Si and Fe micro-additions on the aging response of a dilute Al-0.08Zr-0.08Hf-0.045Er at.% alloy. Mater. Charact. 2019, 147, 72-83. https://doi.org/10.1016/j.matchar.2018.10.016
Detailed Record
Mohanta, A.; Simmons, J. G.; Shen, G.; Kim, S. M.; Kung, P.; Everitt, H. O. Al doping in ZnO nanowires enhances ultraviolet emission and suppresses broad defect emission. J. Lumin. 2019, 211, 264-270. https://doi.org/10.1016/j.jlumin.2019.03.049
Detailed Record
Mohanta, A.; Lanfant, B.; Leparoux, M. Induction plasma synthesis of graphene nano-flakes with in situ investigation of Ar–H2–CH4 plasma by optical emission spectroscopy. Plasma Chem. Plasma Process. 2019, 39 (5), 1161-1179. https://doi.org/10.1007/s11090-019-09997-2
Detailed Record
Mohanta, A.; Leparoux, M. Spectroscopic investigation of laser produced plasma of carbon nanotube reinforced AlMg5 metal matrix nanocomposites. Opt. Lasers Eng. 2019, 121, 37-45. https://doi.org/10.1016/j.optlaseng.2019.03.007
Detailed Record
Muster, M.; Hameed, A.; Wood, D.; Appleby-Thomas, G.; Wasmer, K. Damping of post-impact vibrations. Appl. Acoust. 2019, 156, 427-433. https://doi.org/10.1016/j.apacoust.2019.07.040
Detailed Record
Muster, M.; Hameed, A.; Wood, D.; Wasmer, K. Push-out force and impulse measurement of seven types of small arms ammunition with three different surface states. AIP Adv. 2019, 9 (11), 115016 (9 pp.). https://doi.org/10.1063/1.5128440
Detailed Record
Nguendon Kenhagho, H.; Shevchik, S.; Saeidi, F.; Faivre, N.; Meylan, B.; Rauter, G.; Guzman, R.; Cattin, P.; Wasmer, K.; Zam, A. Characterization of ablated bone and muscle for long-pulsed laser ablation in dry and wet conditions. Materials 2019, 12 (8), 1338 (16 pp.). https://doi.org/10.3390/ma12081338
Detailed Record
Rowthu, S.; Hoffmann, P. Versatile micro- and nanotexturing techniques for antibacterial applications. In Functional nanostructured interfaces for environmental and biomedical applications; Dinca, V., Suchea, M. P., Eds.; Micro and nano technologies; Elsevier: Amsterdam, 2019; pp 27-62. https://doi.org/10.1016/B978-0-12-814401-5.00003-7
Detailed Record
Schuster, M.; Grolimund, D.; Sanchez, D.; Zweiacker, K.; Griffiths, S.; De Luca, A.; Leinenbach, C. Computer-assisted screening of aluminum alloys for rapid solidification applications. Presented at the AAMS2019, Gothenburg, Sweden, September 18-20, 2019.
Detailed Record
Shevchik, S. A.; Meylan, B.; Violakis, G.; Wasmer, K. 3D reconstruction of cracks propagation in mechanical workpieces analyzing non-stationary acoustic mixtures. Mech. Syst. Signal Process. 2019, 119, 55-64. https://doi.org/10.1016/j.ymssp.2018.09.022
Detailed Record
Shevchik, S. A.; Masinelli, G.; Kenel, C.; Leinenbach, C.; Wasmer, K. Deep learning for in situ and real-time quality monitoring in additive manufacturing using acoustic emission. IEEE Trans. Ind. Inform. 2019, 15 (9), 5194-5203. https://doi.org/10.1109/TII.2019.2910524
Detailed Record
Shevchik, S. A.; Le-Quang, T.; Farahani, F. V.; Faivre, N.; Meylan, B.; Zanoli, S.; Wasmer, K. Laser welding quality monitoring via graph support vector machine with data adaptive kernel. IEEE Access 2019, 7, 93108-93122. https://doi.org/10.1109/ACCESS.2019.2927661
Detailed Record
Trabadelo, V.; Pathak, S.; Saeidi, F.; Parlinska-Wojtan, M.; Wasmer, K. Nanoindentation deformation and cracking in sapphire. Ceram. Int. 2019, 45 (8), 9835-9845. https://doi.org/10.1016/j.ceramint.2019.02.022
Detailed Record
Wang, T.; Zhang, J.; Lee, W.; Ivas, T.; Leinenbach, C. Numerical analysis on the residual stress distribution and its influence factor analysis for Si3N4/42CrMo brazed joint. Simul. Model. Pract. Theory 2019, 95, 49-59. https://doi.org/10.1016/j.simpat.2019.04.007
Detailed Record
Wasmer, K.; Le-Quang, T.; Meylan, B.; Shevchik, S. A. In situ quality monitoring in AM using acoustic emission: a reinforcement learning approach. J. Mater. Eng. Perform. 2019, 28 (2), 666-672. https://doi.org/10.1007/s11665-018-3690-2
Detailed Record
Wasmer, K.; Le-Quang, T.; Shevchik, S. A.; Violakis, G. Piezo acoustic versus opto-acoustic sensors in laser processing. In NDT.net, presented at the 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen (DGZfP AE-2019), Karlsruhe, Germany, March 27-28, 2019; 2019; p (8 pp.). http://www.ndt.net/?id=24449
Detailed Record
Wróbel, R.; Griffiths, S.; Leinenbach, C. Influence of processing parameters on microstructure and crack formation during selective laser melting of a L12 -strengthened Ni superalloy. Presented at the AAMS2019, Gothenburg, Sweden, September 18-20, 2019.
Detailed Record
Yang, Y.; Arabi-Hashemi, A.; Leinenbach, C.; Shahverdi, M. Improvement of FeMnSi based shape memory alloys yield stress by heat treatment. In Proceedings of SMAR 2019, fifth conference on smart monitoring, assessment and rehabilitation of civil structures, presented at the SMAR 2019 - 5th conference on smart monitoring, assessment and rehabilitation of civil structures, Potsdam, Germany, August 27-29, 2019; SMAR proceedings; 2019; p (7 pp.).
Detailed Record
Zeljković, S.; Ivas, T.; Maruyama, H.; Nino, J. C. Structural, magnetic and optical properties of BiFeO3 synthesized by the solvent-deficient method. Ceram. Int. 2019, 45 (16), 19793-19798. https://doi.org/10.1016/j.ceramint.2019.06.234
Detailed Record
Anis, A. L.; Talari, M. K.; Kishore Babu, N.; Ismail, M. H.; Janaki Ram, G. D.; Mohd Arif, I. A. Grain refinement of Ti-15V-3Cr-3Sn-3Al metastable β titanium alloy welds using boron-modified fillers. J. Alloys Compd. 2018, 749, 320-328. https://doi.org/10.1016/j.jallcom.2018.03.286
Detailed Record
Arabi-Hashemi, A.; Lee, W. J.; Leinenbach, C. Recovery stress formation in FeMnSi based shape memory alloys: impact of precipitates, texture and grain size. Mater. Des. 2018, 139, 258-268. https://doi.org/10.1016/j.matdes.2017.11.006
Detailed Record
Arabi-Hashemi, A.; Guo, Y.; Michler, J.; Casari, D.; Leinenbach, C.; Maeder, X. Stress induced martensite variants revealed by in situ high resolution electron backscatter diffraction (HR-EBSD). Mater. Des. 2018, 151, 83-88. https://doi.org/10.1016/j.matdes.2018.04.006
Detailed Record
Arnold, K.; Tatlock, G.; Kenel, C.; Colella, A.; Matteazzi, P. High temperature isothermal oxidation behaviour of an oxide dispersion strengthened derivative of IN625. Mater. High Temp. 2018, 35 (1-3), 141-150. https://doi.org/10.1080/09603409.2017.1393145
Detailed Record
Crisan, A. D.; Vasiliu, F.; Nicula, R.; Bartha, C.; Mercioniu, I.; Crisan, O. Thermodynamic, structural and magnetic studies of phase transformations in MnAl nanocomposite alloys. Mater. Charact. 2018, 140, 1-8. https://doi.org/10.1016/j.matchar.2018.03.034
Detailed Record
Croteau, J. R.; Griffiths, S.; Rossell, M. D.; Leinenbach, C.; Kenel, C.; Jansen, V.; Seidman, D. N.; Dunand, D. C.; Vo, N. Q. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting. Acta Mater. 2018, 153, 35-44. https://doi.org/10.1016/j.actamat.2018.04.053
Detailed Record
Gong, J.; Violakis, G.; Infante, D.; Hoffmann, P.; Kostro, A.; Schüler, A. Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation. In Laser-based micro- and nanoprocessing XII, presented at the SPIE Lase, San Francisco, California, January 27-February 1, 2018; Klotzbach, U., Washio, K., Kling, R., Eds.; Proceedings of SPIE; SPIE: Bellingham, Washington, 2018; Vol. 10520, p 105200Z (8 pp.). https://doi.org/10.1117/12.2286908
Detailed Record
Griffiths, S.; Rossell, M. D.; Croteau, J.; Vo, N. Q.; Dunand, D. C.; Leinenbach, C. Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy. Mater. Charact. 2018, 143, 34-42. https://doi.org/10.1016/j.matchar.2018.03.033
Detailed Record
Hammoud, H.; Valdivieso, F.; Vaucher, S. Multiphysics modelling approach to microwave heating of cerium oxide particles in diverse packing situations. IET Sci. Meas. Technol. 2018, 12 (7), 838-843. https://doi.org/10.1049/iet-smt.2017.0577
Detailed Record
Hosseini, E.; Ghafoori, E.; Leinenbach, C.; Motavalli, M.; Holdsworth, S. R. Stress recovery and cyclic behaviour of an Fe–Mn–Si shape memory alloy after multiple thermal activation. Smart Mater. Struct. 2018, 27 (2), 025009 (10 pp.). https://doi.org/10.1088/1361-665X/aaa2c9
Detailed Record
Kwon, H.; Park, J.; Kim, K.; Leparoux, M.; Silvain, J. F.; Kawasaki, A. Control of mechanical properties of functionally graded dual-nanoparticle-reinforced composites. In THERMEC 2018. 10th international conference on processing and manufacturing of advanced materials, presented at the THERMEC 2018. 10th international conference on processing and manufacturing of advanced materials, Paris, France, July 9-13, 2018; Shabadi, R., Ionescu, M., Jeandin, M., Richard, C., Chandra, T., Eds.; Materials science forum; Trans Tech Publications: Zurich, 2018; Vol. 941, pp 2037-2040. https://doi.org/10.4028/www.scientific.net/MSF.941.2037
Detailed Record
Le Dantec, M.; Abdulstaar, M.; Leistner, M.; Leparoux, M.; Hoffmann, P. Additive manufacturing of semiconductor silicon on silicon using direct laser melting. In Industrializing additive manufacturing - proceedings of additive manufacturing in products and applications - AMPA2017, presented at the International conference on additive manufacturing in products and applications (AMPA), Zürich, Switzerland, September 13-15, 2017; Meboldt, M., Klahn, C., Eds.; Springer: Cham, Switzerland, 2018; pp 104-116. https://doi.org/10.1007/978-3-319-66866-6_10
Detailed Record
Le-Quang, T.; Shevchik, S. A.; Meylan, B.; Vakili-Farahani, F.; Olbinado, M. P.; Rack, A.; Wasmer, K. Why is in situ quality control of laser keyhole welding a real challenge? In 10th CIRP conference on photonic technologies [LANE 2018], presented at the 10th CIRP conference on photonic technologies [LANE 2018], Fürth, Germany, September 03-06, 2018; Schmidt, M., Vollertsen, F., Dearden, G., Eds.; Procedia CIRP; Elsevier, 2018; Vol. 74, pp 649-653. https://doi.org/10.1016/j.procir.2018.08.055
Detailed Record
Leparoux, M.; Kollo, L.; Kwon, H.; Kallip, K.; Babu, N. K.; AlOgab, K.; Talari, M. K. Solid state processing of aluminum matrix composites reinforced with nanoparticulate materials. Adv. Eng. Mater. 2018, 20 (11), 1800401 (18 pp.). https://doi.org/10.1002/adem.201800401
Detailed Record
Li, X.; Ivas, T.; Spierings, A. B.; Wegener, K.; Leinenbach, C. Phase and microstructure formation in rapidly solidified Cu-Sn and Cu-Sn-Ti alloys. J. Alloys Compd. 2018, 735, 1374-1382. https://doi.org/10.1016/j.jallcom.2017.11.237
Detailed Record
Meylan, B.; Saeidi, F.; Wasmer, K. Effect of surface texturing on cast iron reciprocating against steel under cyclic loading in boundary and mixed lubrication conditions. Lubricants 2018, 6 (1), 2 (13 pp.). https://doi.org/10.3390/lubricants6010002
Detailed Record
Mohanta, A.; Jang, D. J.; Lu, S. K.; Ling, D. C.; Wang, J. S.; Chen, R. B.; Chuang, F. C. Carrier recombination dynamics in electronically coupled multi-layer InAs/GaAs quantum dots. J. Lumin. 2018, 195, 109-115. https://doi.org/10.1016/j.jlumin.2017.11.009
Detailed Record
Mohanta, A.; Lanfant, B.; Leparoux, M. Optical emission spectroscopy and imaging during synthesis of nanoparticles, laser welding and additive manufacturing. Presented at the Advanced manufacturing: a challenge for materials science, Dübendorf, Switzerland, October 22-24, 2018.
Detailed Record
Rowthu, S.; Saeidi, F.; Wasmer, K.; Hoffmann, P.; Kuebler, J. Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina. Ceram. Int. 2018, 44 (5), 5193-5201. https://doi.org/10.1016/j.ceramint.2017.12.125
Detailed Record
Rowthu, S.; Hoffmann, P. Perfluoropolyether-impregnated mesoporous alumina composites overcome the dewetting-tribological properties trade-off. ACS Appl. Mater. Interfaces 2018, 10 (12), 10560-10570. https://doi.org/10.1021/acsami.8b00061
Detailed Record
Shevchik, S.; Le, Q. T.; Meylan, B.; Wasmer, K. Acoustic Emission for in situ monitoring of laser processing. In Conference proceedings Ewgae 2018, presented at the 33rd European conference on acoustic emission testing (EWGAE), Senlis, France, September 12-14, 2018; CETIM: Senlis, 2018; p (9 pp.).
Detailed Record
Shevchik, S. A.; Meylan, B.; Mosaddeghi, A.; Wasmer, K. Acoustic emission for in situ monitoring of solid materials pre-weakening by electric discharge: a machine learning approach. IEEE Access 2018, 6, 40313-40324. https://doi.org/10.1109/ACCESS.2018.2853666
Detailed Record
Shevchik, S. A.; Kenel, C.; Leinenbach, C.; Wasmer, K. Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks. Addit. Manuf. 2018, 21, 598-604. https://doi.org/10.1016/j.addma.2017.11.012
Detailed Record
Tang, Y.; Li, X.; Martin, L. H. J.; Cuervo Reyes, E.; Ivas, T.; Leinenbach, C.; Anand, S.; Peters, M.; Snyder, G. J.; Battaglia, C. Impact of Ni content on the thermoelectric properties of half-Heusler TiNiSn. Energy Environ. Sci. 2018, 11 (2), 311-320. https://doi.org/10.1039/C7EE03062B
Detailed Record
Wasmer, K.; Kenel, C.; Leinenbach, C.; Shevchik, S. A. In situ and real-time monitoring of powder-bed AM by combining acoustic emission and artificial intelligence. In Industrializing additive manufacturing - proceedings of additive manufacturing in products and applications - AMPA2017, presented at the International conference on additive manufacturing in products and applications (AMPA), Zürich, Switzerland, September 13-15, 2017; Mebold, M., Klahn, C., Eds.; Springer: Cham, Switzerland, 2018; pp 200-209. https://doi.org/10.1007/978-3-319-66866-6_20
Detailed Record
Wasmer, K.; Le, T. Q.; Meylan, B.; Vakili-Farahani, F.; Leinenbach, C.; Olbinado, M. P.; Rack, A.; Shevchik, S. A. AM/LW process monitoring combining high-speed X-ray imaging, acoustic & optical sensors and artificial intelligence. Presented at the ESRF user meeting 2018, Grenoble, France, February 5-7, 2018.
Detailed Record
Wasmer, K. High-speed X-ray imaging for correlating acoustic signals with quality monitoring: a machine learning approach. In Contributed Papers from Materials Science & Technology 2018, presented at the Materials science & technology 2018 (MS&T18), Columbus, Ohio USA, October 14-18, 2018; 2018; pp 165-168.
Detailed Record
Wasmer, K.; Le-Quang, T.; Meylan, B.; Vakili-Farahani, F.; Olbinado, M. P.; Rack, A.; Shevchik, S. A. Laser processing quality monitoring by combining acoustic emission and machine learning: a high-speed X-ray imaging approach. In 10th CIRP conference on photonic technologies [LANE 2018], presented at the 10th CIRP conference on photonic technologies [LANE 2018], Fürth, Germany, September 03-06, 2018; Schmidt, M., Vollertsen, F., Dearden, G., Eds.; Procedia CIRP; Elsevier, 2018; Vol. 74, pp 654-658. https://doi.org/10.1016/j.procir.2018.08.054
Detailed Record
Wasmer, K.; Saeidi, F.; Meylan, B.; Le, Q. T.; Shevchik, S. A. When AE (acoustic emission) meets AI (artificial intelligence) II. In Conference proceedings Ewgae 2018, presented at the 33rd European conference on acoustic emission testing (EWGAE), Senlis, France, September 12-14, 2018; CETIM: Senlis, 2018; p (12 pp.).
Detailed Record
Zeljković, S.; Miyawaki, J.; Vranković, D.; Tervoort, E.; Hauert, R.; Kotegawa, T.; Ivas, T. Solvent-deficient synthesis of nanocrystalline Ba0.5Sr0.5Co0.8Fe0.2O3-δ powder. Process. Appl. Ceramics 2018, 12 (4), 342-349. https://doi.org/10.2298/PAC1804342Z
Detailed Record
Zhang, B.; Meylan, B.; Wasmer, K.; Cuche, E. A new ball-on-disk vacuum tribometer with in situ measurement of the wear track by digital holographic microscopy. In Proceedings of Asia international conference on tribology 2018, presented at the ASIATRIB 2018. The 6th Asia international conference on tribology, Sarawak, Malaysia, September 17-20, 2018; Abdollah, M. F. B., Ed.; Malaysian Tribology Society: Kuala Lumpur, 2018; pp 109-110.
Detailed Record
Anis, A. L.; Talari, M. K.; Mohd Arif, I. A.; Kishore Babu, N.; Ismail, M. H.; Janaki Ram, G. D. Microstructure and mechanical properties of Ti-15-3 alloy gas tungsten arc welds prepared using CP-titanium filler. Trans. Indian Inst. Met. 2017, 70 (3), 685-690. https://doi.org/10.1007/s12666-017-1049-2
Detailed Record
Arif, I. A. M.; Talari, M. K.; Anis, A. L.; Ismail, M. H.; Kishore Babu, N. Grain refinement, microstructural and hardness investigation of C added Ti-15-3 alloys prepared by argon arc melting. Trans. Indian Inst. Met. 2017, 70 (3), 861-865. https://doi.org/10.1007/s12666-017-1048-3
Detailed Record
Darham, W.; Anis, A. L.; Arif, I. A. M.; Kishore Babu, N.; Harun, M. K.; Talari, M. K. Microstructure and high temperature impression creep properties of Mg–3Ca–xZr (x = 0.3, 0.6, 0.9 wt%) alloys. Trans. Indian Inst. Met. 2017, 70 (3), 649-654. https://doi.org/10.1007/s12666-017-1068-z
Detailed Record
Demiral, M.; Nowag, K.; Roy, A.; Ghisleni, R.; Michler, J.; Silberschmidt, V. V. Enhanced gradient crystal-plasticity study of size effects in a β-titanium alloy. Model. Simul. Mater. Sci. Eng. 2017, 25 (3), 035013 (19 pp.). https://doi.org/10.1088/1361-651X/aa5ce3
Detailed Record
Ghafoori, E.; Hosseini, E.; Leinenbach, C.; Michels, J.; Motavalli, M. Fatigue behavior of a Fe-Mn-Si shape memory alloy used for prestressed strengthening. Mater. Des. 2017, 133, 349-362. https://doi.org/10.1016/j.matdes.2017.07.055
Detailed Record
Griffiths, S.; Wasyliszyn, M.; Leinenbach, C. Rapid solidification experiments with CM247LC. Presented at the Alloys for additive manufacturing symposium (AAMS) 2017, Dübendorf, Switzerland, September 11-12, 2017.
Detailed Record
Kalentics, N.; Boillat, E.; Peyre, P.; Gorny, C.; Kenel, C.; Leinenbach, C.; Jhabvala, J.; Logé, R. E. 3D laser shock peening – a new method for the 3D control of residual stresses in selective laser melting. Mater. Des. 2017, 130, 350-356. https://doi.org/10.1016/j.matdes.2017.05.083
Detailed Record
Kallip, K.; Kishore Babu, N.; AlOgab, K. A.; Kollo, L.; Maeder, X.; Arroyo, Y.; Leparoux, M. Microstructure and mechanical properties of near net shaped aluminium/alumina nanocomposites fabricated by powder metallurgy. J. Alloys Compd. 2017, 714, 133-143. https://doi.org/10.1016/j.jallcom.2017.04.233
Detailed Record
Kenel, C.; Grolimund, D.; Li, X.; Panepucci, E.; Samson, V. A.; Ferreira Sanchez, D.; Marone, F.; Leinenbach, C. In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction. Sci. Rep. 2017, 7, 16358 (10 pp.). https://doi.org/10.1038/s41598-017-16760-0
Detailed Record
Kenel, C.; Lis, A.; Dawson, K.; Stiefel, M.; Pecnik, C.; Barras, J.; Colella, A.; Hauser, C.; Tatlock, G. J.; Leinenbach, C.; et al. Mechanical performance and oxidation resistance of an ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing. Intermetallics 2017, 91, 169-180. https://doi.org/10.1016/j.intermet.2017.09.004
Detailed Record
Kenel, C.; Dawson, K.; Barras, J.; Hauser, C.; Dasargyri, G.; Bauer, T.; Colella, A.; Spierings, A. B.; Tatlock, G. J.; Leinenbach, C.; et al. Microstructure and oxide particle stability in a novel ODS γ-TiAl alloy processed by spark plasma sintering and laser additive manufacturing. Intermetallics 2017, 90, 63-73. https://doi.org/10.1016/j.intermet.2017.07.004
Detailed Record
Kenel, C.; Dasargyri, G.; Bauer, T.; Colella, A.; Spierings, A. B.; Leinenbach, C.; Wegener, K. Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures. Mater. Des. 2017, 134, 81-90. https://doi.org/10.1016/j.matdes.2017.08.034
Detailed Record
Kishore Babu, N.; Kallip, K.; Leparoux, M.; AlOgab, K. A.; Talari, M. K.; Alqahtani, N. M. High strength Ti-6Al-4V alloy fabricated by high-energy cube milling using calcium as process control agent (PCA) and spark plasma sintering. Int. J. Adv. Manuf. Technol. 2017, 93 (1-4), 445-453. https://doi.org/10.1007/s00170-017-9994-9
Detailed Record
Kishore Babu, N.; Kallip, K.; Leparoux, M.; Talari, M. K.; AlOgab, K. A.; Alqahtani, N. M. Phase evolution during high energy cube milling of Ti–6Al–4V–0.5 vol% TiC powders using heptane and tin as process control agents (PCAs). Adv. Eng. Mater. 2017, 19 (2), 1600662 (6 pp.). https://doi.org/10.1002/adem.201600662
Detailed Record
Kormondy, K. J.; Popoff, Y.; Sousa, M.; Eltes, F.; Caimi, D.; Rossell, M. D.; Fiebig, M.; Hoffmann, P.; Marchiori, C.; Reinke, M.; et al. Microstructure and ferroelectricity of BaTiO3 thin films on Si for integrated photonics. Nanotechnology 2017, 28 (7), 075706 (10 pp.). https://doi.org/10.1088/1361-6528/aa53c2
Detailed Record
Kwon, H.; Park, J.; Leparoux, M. Dispersion behavior and size analysis of thermally purified high pressure-high temperature synthesized nanodiamond particles. J. Korean Powder Metall. Inst. 2017, 24 (3), 216-222. https://doi.org/10.4150/KPMI.2017.24.3.216
Detailed Record
Kwon, H.; Mondal, J.; AlOgab, K. A.; Sammelselg, V.; Takamichi, M.; Kawaski, A.; Leparoux, M. Graphene oxide-reinforced aluminum alloy matrix composite materials fabricated by powder metallurgy. J. Alloys Compd. 2017, 698, 807-813. https://doi.org/10.1016/j.jallcom.2016.12.179
Detailed Record
Kwon, H.; Kawasaki, A.; Leparoux, M. Mechanical behaviour of dual nanoparticle-reinforced aluminium alloy matrix composite materials depending on milling time. J. Compos. Mater. 2017, 51 (25), 3557-3562. https://doi.org/10.1177/0021998316673521
Detailed Record
Leinenbach, C.; Arabi-Hashemi, A.; Lee, W. J.; Lis, A.; Sadegh-Ahmadi, M.; Van Petegem, S.; Panzner, T.; Van Swygenhoven, H. Characterization of the deformation and phase transformation behavior of VC-free and VC-containing FeMnSi-based shape memory alloys by in situ neutron diffraction. Mater. Sci. Eng. A 2017, 703, 314-323. https://doi.org/10.1016/j.msea.2017.07.077
Detailed Record
Leparoux, M.; Le Dantec, M.; Abdulstaar, M.; Hoffmann, P. Fabrication of aluminium matrix nanocomposite powders by powder metallurgy. Presented at the Alloys for additive manufacturing, Dübendorf, Switzerland, September 11-12, 2017.
Detailed Record
Li, X.; Spierings, A. B.; Wegener, K.; Leinenbach, C. An innovative way to develop Cu-Sn based alloys for additive manufacturing. Presented at the Alloys for additive manufacturing symposium (AAMS) 2017, Dübendorf, Switzerland, September 11-12, 2017.
Detailed Record
Lis, A.; Kicin, S.; Brem, F.; Leinenbach, C. Thermal stress assessment for transient liquid-phase bonded Si chips in high-power modules using experimental and numerical methods. J. Electron. Mater. 2017, 46 (2), 729-741. https://doi.org/10.1007/s11664-016-5064-6
Detailed Record
Mathew, J.; Hauser, C.; Stoll, P.; Kenel, C.; Polyzos, D.; Havermann, D.; MacPherson, W. N.; Hand, D. P.; Leinenbach, C.; Spierings, A.; et al. Integrating fiber Fabry-Perot cavity sensor into 3-D printed metal components for extreme high-temperature monitoring applications. IEEE Sens. J. 2017, 17 (13), 4107-4114. https://doi.org/10.1109/JSEN.2017.2703085
Detailed Record
Meylan, B.; Ciani, D.; Zhang, B.; Cuche, E.; Wasmer, K. A new ball-on-disk vacuum tribometer with in situ measurement of the wear track by digital holographic microscopy. Surf. Topography Metrology Properties 2017, 5 (4), 044004 (10 pp.). https://doi.org/10.1088/2051-672X/aa854a
Detailed Record
Mohanta, A.; Lanfant, B.; Asfaha, M.; Leparoux, M. Methane dissociation process in inductively coupled Ar/H2/CH4 plasma for graphene nano-flakes production. Appl. Phys. Lett. 2017, 110 (9), 093109 (5 pp.). https://doi.org/10.1063/1.4977568
Detailed Record
Mohanta, A.; Lanfant, B.; Asfaha, M.; Leparoux, M. Optical emission spectroscopic study of Ar/H2/CH4 plasma during the production of graphene nano-flakes by induction plasma synthesis. Presented at the 14th high-tech plasma processes conference (HTPP 14), Munchen, Germany, July 3, 2016; Journal of physics: conference series; IOP Publishing: Bristol; Vol. 825, p 012010 (8 pp.). https://doi.org/10.1088/1742-6596/825/1/012010
Detailed Record
Nguendon, H. K.; Faivre, N.; Meylan, B.; Shevchik, S.; Rauter, G.; Guzman, R.; Cattin, P. C.; Wasmer, K.; Zam, A. Characterization of ablated porcine bone and muscle using laser-induced acoustic wave method for tissue differentiation. Presented at the European conference on biomedical optics, ECBO 2017, Munich, Germany, June 25-29, 2017; Proceedings of SPIE; SPIE: Bellingham; Vol. 10417, p 104170N (10 pp.). https://doi.org/10.1117/12.2286121
Detailed Record
Popescu, A. C.; Delval, C.; Leparoux, M. Control of porosity and spatter in laser welding of thick AlMg5 parts using high-speed imaging and optical microscopy. Metals 2017, 7 (11), 452 (12 pp.). https://doi.org/10.3390/met7110452
Detailed Record
Reinke, M.; Kuzminykh, Y.; Eltes, F.; Abel, S.; LaGrange, T.; Neels, A.; Fompeyrine, J.; Hoffmann, P. Low temperature epitaxial barium titanate thin film growth in high vacuum CVD. Adv. Mater. Interfaces 2017, 1700116 (8 pp.). https://doi.org/10.1002/admi.201700116
Detailed Record
Rowthu, S.; Balic, E. E.; Hoffmann, P. Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces. Nanotechnology 2017, 28 (50), 505605 (14 pp.). https://doi.org/10.1088/1361-6528/aa974a
Detailed Record
Saeidi, F.; Parlinska-Wojtan, M.; Hoffmann, P.; Wasmer, K. Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions. Wear 2017, 386-387, 29-38. https://doi.org/10.1016/j.wear.2017.05.015
Detailed Record
Saeidi, F.; Taylor, A. A.; Meylan, B.; Hoffmann, P.; Wasmer, K. Origin of scuffing in grey cast iron-steel tribo-system. Mater. Des. 2017, 116, 622-630. https://doi.org/10.1016/j.matdes.2016.12.044
Detailed Record
Shevchik, S. A.; Saeidi, F.; Meylan, B.; Wasmer, K. Prediction of failure in lubricated surfaces using acoustic time–frequency features and random forest algorithm. IEEE Trans. Ind. Inform. 2017, 13 (4), 1541-1553. https://doi.org/10.1109/TII.2016.2635082
Detailed Record
Siva Prasad, M.; Ashfaq, M.; Kishore Babu, N.; Sreekanth, A.; Sivaprasad, K.; Muthupandi, V. Improving the corrosion properties of magnesium AZ31 alloy GTA weld metal using microarc oxidation process. Int. J. Miner. Metall. Mater. 2017, 24 (5), 566-573. https://doi.org/10.1007/s12613-017-1438-x
Detailed Record
Uta, M.; Sima, L. E.; Hoffmann, P.; Dinca, V.; Branza-Nichita, N. Development of a DsRed-expressing HepaRG cell line for real-time monitoring of hepatocyte-like cell differentiation by fluorescence imaging, with application in screening of novel geometric microstructured cell growth substrates. Biomed. Microdevices 2017, 19 (1), 3 (9 pp.). https://doi.org/10.1007/s10544-016-0146-z
Detailed Record
Vakili-Farahani, F.; Lungershausen, J.; Wasmer, K. Wavelet analysis of light emission signals in laser beam welding. J. Laser Appl. 2017, 29 (2), 022424 (7 pp.). https://doi.org/10.2351/1.4983507
Detailed Record
Vaucher, S.; Yakovlev, V. V.; Yeung, H. Materials with required dielectric properties: computational development and production of polymer-ceramic composites. Polym. Eng. Sci. 2017, 58 (3), 319-326. https://doi.org/10.1002/pen.24575
Detailed Record
Wasmer, K.; Kenel, C.; Leinenbach, C.; Shevchik, S. A. In situ quality monitoring in am using acoustic emission: a machine learning approach. Presented at the Materials science and technology (MS&T17), Pittsburg, Pennsylvania, USA, October 8-12, 2017; AISTECH; pp 386-388. https://doi.org/10.7449/2017/MST_2017_386_388
Detailed Record
Wasmer, K.; Pochon, P. M.; Sage, D.; Giovanola, J. H. Parametric experimental study and design of experiment modelling of sapphire grinding. J. Clean. Prod. 2017, 141, 323-335. https://doi.org/10.1016/j.jclepro.2016.09.031
Detailed Record
Wasmer, K.; Shevchik, S. A. Sensors networks and machine learning in industry 4.0. Presented at the IEEE Swiss CAS/ED workshop 2017 on real-time deep learning workshop (RTDL 2017), Zürich, Switzerland, December 5, 2017; IEEE.
Detailed Record
Akbari, M.; Buhl, S.; Leinenbach, C.; Wegener, K. A new value for Johnson Cook damage limit criterion in machining with large negative rake angle as basis for understanding of grinding. J. Mater. Process. Technol. 2016, 234, 58-71. https://doi.org/10.1016/j.jmatprotec.2016.03.009
Detailed Record
Amalfi, R. L.; Vakili-Farahani, F.; Thome, J. R. Flow boiling and frictional pressure gradients in plate heat exchangers. Part 1: review and experimental database. Int. J. Refrigeration 2016, 61, 166-184. https://doi.org/10.1016/j.ijrefrig.2015.07.010
Detailed Record
Amalfi, R. L.; Vakili-Farahani, F.; Thome, J. R. Flow boiling and frictional pressure gradients in plate heat exchangers. Part 2: comparison of literature methods to database and new prediction methods. Int. J. Refrigeration 2016, 61, 185-203. https://doi.org/10.1016/j.ijrefrig.2015.07.009
Detailed Record
Anis, A. L.; Talari, M. K.; Darham, W.; Babu, N. K.; Ismail, M. H. Microstructure and hardness improvement of Ti-6AL-4V alloys VIA boron addition. Journal Eng. Appl. Sciences 2016, 11 (12), 2577-2582.
Detailed Record
Babu, N. K.; Kallip, K.; Leparoux, M.; AlOgab, K. A.; Reddy, G. M.; Talari, M. K. Microstructure evolution and mechanical properties investigation of friction stir welded AlMg5-Al2O3 nanocomposites. In TMS 2016 145th annual meeting & exhibition. Supplemental proceedings, presented at the TMS 2016. 145th annual meeting and exhibition, Nashville, Tennessee, February 14-18, 2016; The Minerals, Metals & Materials Society, Ed.; Springer: Cham, 2016; pp 729-736. https://doi.org/10.1002/9781119274896.ch87
Detailed Record
Cozzo, C.; Ishizaki, K.; Pouchon, M. A.; Vaucher, S. Developing an in situ EXAFS experiment of microwave-induced gelation. J. Sol-Gel Sci. Technol. 2016, 78 (3), 507-513. https://doi.org/10.1007/s10971-016-3992-5
Detailed Record
Crisan, O.; Crisan, A. D.; Mercioniu, I.; Nicula, R.; Vasiliu, F. Development and structural characterization of exchange-spring-like nanomagnets in (Fe,Co)-Pt bulk nanocrystalline alloys. J. Magn. Magn. Mater. 2016, 401, 711-715. https://doi.org/10.1016/j.jmmm.2015.10.114
Detailed Record
Darham, W.; Talari, M. K.; Anis, A. L.; Babu, N. K. Impression creep of Mg-1.5Ca and Mg-3.0Ca alloys. Journal Eng. Appl. Sciences 2016, 11 (12), 2573-2576.
Detailed Record
Esqué-de los Ojos, D.; Ghisleni, R.; Battisti, A.; Mohanty, G.; Michler, J.; Sort, J.; Brunner, A. J. Understanding the mechanical behavior of fiber/matrix interfaces during push-in tests by means of finite element simulations and a cohesive zone model. Comput. Mater. Sci 2016, 117, 330-337. https://doi.org/10.1016/j.commatsci.2016.02.009
Detailed Record
Hammoud, H.; Valdivieso, F.; Vaucher, S. Thermal heating during microwave processing for cerium oxide particles packing: multiphysics modelling approach. Study of the effect of particle and neck sizes. In 2015 IEEE MTT-S international conference on numerical electromagnetic and multiphysics modeling and optimization (NEMO), presented at the 2015 IEEE MTT-S international conference on numerical electromagnetic and multiphysics modeling and optimization (NEMO), Ottawa, ON, Canada, August 11-14, 2015; IEEE, 2016; p 7415042 (4 pp.). https://doi.org/10.1109/NEMO.2015.7415042
Detailed Record
Infante-Gómez, D.; Herzig, H. P. Design, simulation, and quality evaluation of micro-optical freeform beam shapers at different illumination conditions. Appl. Opt. 2016, 55 (29), 8340-8346. https://doi.org/10.1364/AO.55.008340
Detailed Record
Kallip, K.; Kollo, L.; Leparoux, M.; Bradbury, C. Nanoparticulate reinforced aluminum alloy composites produced by powder metallurgy route. In Advanced composites for aerospace, marine, and land applications II; Sano, T., Srivatsan, T. S., Eds.; Springer International Publishing: Basel, Switzerland, 2016; pp 165-174. https://doi.org/10.1007/978-3-319-48141-8_12
Detailed Record
Kenel, C.; Grolimund, D.; Fife, J. L.; Samson, V. A.; Van Petegem, S.; Van Swygenhoven, H.; Leinenbach, C. Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti–48Al under additive manufacturing conditions. Scr. Mater. 2016, 114, 117-120. https://doi.org/10.1016/j.scriptamat.2015.12.009
Detailed Record
Kenel, C. Development of oxide dispersion strengthened titanium aluminides for additive manufacturing. Doctoral dissertation, ETH Zürich, Zürich, 2016, 201 p. https://doi.org/10.3929/ethz-a-010860058
Detailed Record
Kenel, C.; Schloth, P.; Van Petegem, S.; Fife, J. L.; Grolimund, D.; Menzel, A.; Van Swygenhoven, H.; Leinenbach, C. In situ synchrotron x-ray diffraction and small angle x-ray scattering studies on rapidly heated and cooled Ti-Al and Al-Cu-Mg alloys using laser-based heating. JOM J. Miner. Met. Mater. Soc. 2016, 68 (3), 978-984. https://doi.org/10.1007/s11837-015-1774-0
Detailed Record
Kenel, C.; Leinenbach, C. Influence of Nb and Mo on microstructure formation of rapidly solidified ternary Ti–Al-(Nb, Mo) alloys. Intermetallics 2016, 69, 82-89. https://doi.org/10.1016/j.intermet.2015.10.018
Detailed Record
Kishore Babu, N.; Kallip, K.; Leparoux, M.; AlOgab, K. A.; Talari, M. K. Influence of calcium process control agent (PCA) on Ti-6Al-4V alloy fabricated by high energy ball milling and spark plasma sintering. Presented at the Material science and engineering conference (MSE), Darmstadt, DE, September 27-29, 2016.
Detailed Record
Leinenbach, C.; Lee, W. J.; Lis, A.; Arabi-Hashemi, A.; Cayron, C.; Weber, B. Creep and stress relaxation of a FeMnSi-based shape memory alloy at low temperatures. Mater. Sci. Eng. A 2016, 677, 106-115. https://doi.org/10.1016/j.msea.2016.09.042
Detailed Record
Leinenbach, C.; Czaderski, C.; Michels, J.; Graf, M.; Kawalla, R. Development of rolling technology for an iron-based shape-memory-alloy. In Production and further processing of flat products, presented at the International conference on production and further processing of flat products, MEFORM 2016, Freiberg, Germany, March 16–18, 2016; Kawalla, R., Ullmann, M., Neh, K., Eds.; Materials science forum; Trans Tech Publications: Zurich, 2016; Vol. 854, pp 79-86. https://doi.org/10.4028/www.scientific.net/MSF.854.79
Detailed Record
Li, X.; Spierings, A. B.; Kenel, C.; Leinenbach, C.; Wegener, K. Metal-diamond composites processed by selective laser melting. Presented at the THERMEC 2016 international conference on processing & manufacturing of advanced materials. Processing, fabrication, properties, applications., Graz, Austria, May 29 - June 3, 2016.
Detailed Record
Lis, A.; Kenel, C.; Leinenbach, C. Characteristics of reactive Ni3Sn4 formation and growth in Ni-Sn interlayer systems. Metall. Mater. Trans. A 2016, 47A (6), 2596-2608. https://doi.org/10.1007/s11661-016-3444-4
Detailed Record
Malheiro, V.; Lehner, F.; Dinca, V.; Hoffmann, P.; Maniura-Weber, K. Convex and concave micro-structured silicone controls the shape, but not the polarization state of human macrophages. Biomater. Sci. 2016, 4 (11), 1562-1573. https://doi.org/10.1039/C6BM00425C
Detailed Record
Meylan, B.; Dogan, P.; Sage, D.; Wasmer, K. A simple, fast and low-cost method for in situ monitoring of topographical changes and wear rate of a complex tribo-system under mixed lubrication. Wear 2016, 364-365, 22-30. https://doi.org/10.1016/j.wear.2016.06.006
Detailed Record
N., K. B.; Kallip, K.; Leparoux, M.; AlOgab, K. A.; Reddy, G. M.; Talari, M. K. Characterization of microstructure and mechanical properties of friction stir welded AlMg5- Al2O3 nanocomposites. Mater. Sci. Eng. A 2016, 658, 109-122. https://doi.org/10.1016/j.msea.2016.01.102
Detailed Record
N., K. B.; Kallip, K.; Leparoux, M.; AlOgab, K. A.; Maeder, X.; Arroyo Rojas Dasilva, Y. Influence of microstructure and strengthening mechanism of AlMg5–Al2O3 nanocomposites prepared via spark plasma sintering. Mater. Des. 2016, 95, 534-544. https://doi.org/10.1016/j.matdes.2016.01.138
Detailed Record
Popescu, A. C.; Delval, C.; Shadman, S.; Leparoux, M. Investigation and in situ removal of spatter generated during laser ablation of aluminium composites. Appl. Surf. Sci. 2016, 378, 102-113. https://doi.org/10.1016/j.apsusc.2016.03.031
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Surface reaction kinetics of titanium isopropoxide and water in atomic layer deposition. J. Phys. Chem. C 2016, 120 (8), 4337-4344. https://doi.org/10.1021/acs.jpcc.5b10529
Detailed Record
Saeidi, F.; Shevchik, S. A.; Wasmer, K. Automatic detection of scuffing using acoustic emission. Tribol. Int. 2016, 94, 112-117. https://doi.org/10.1016/j.triboint.2015.08.021
Detailed Record
Saeidi, F.; Meylan, B.; Hoffmann, P.; Wasmer, K. Effect of surface texturing on cast iron reciprocating against steel under starved lubrication conditions: a parametric study. Wear 2016, 348-349, 17-26. https://doi.org/10.1016/j.wear.2015.10.020
Detailed Record
Sar, J.; Almeida, A.; Ghisleni, R.; Dessemond, L.; Djurado, E. Mechanical behavior of Ce0.9Gd0.1O1.95-La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrode with a coral microstructure for solid oxide fuel cell and solid oxide electrolyzer cell. Ceram. Int. 2016, 42 (15), 16981-16991. https://doi.org/10.1016/j.ceramint.2016.07.204
Detailed Record
Talari, M. K.; Babu, N. K.; Kallip, K.; Leparoux, M.; Koller, R. E.; AlOgab, K. A.; Maeder, X. Microstructure, mechanical, and impression creep properties of AlMg5–0.5 vol% Al2O3 nanocomposites. Adv. Eng. Mater. 2016, 18 (11), 1958-1966. https://doi.org/10.1002/adem.201600301
Detailed Record
Vakili-Farahani, F.; Lungershausen, J.; Wasmer, K. Process parameter optimization for wobbling laser spot welding of Ti6Al4V alloy. In Laser assisted net shape engineering. 9th international conference on photonic technologies. Proceedings of the LANE 2016, presented at the 9th international conference on photonic technologies - LANE 2016, Fürth, Germany, September 19-22, 2016; Schmidt, M., Vollertsen, F., Arnold, C. B., Eds.; Physics procedia; Elsevier, 2016; Vol. 83, pp 483-493. https://doi.org/10.1016/j.phpro.2016.08.050
Detailed Record
Wang, T.; Liu, C.; Leinenbach, C.; Zhang, J. Microstructure and strengthening mechanism of Si3N4/Invar joint brazed with TiNp-doped filler. Mater. Sci. Eng. A 2016, 650, 469-477. https://doi.org/10.1016/j.msea.2015.10.038
Detailed Record
Wang, T.; Ivas, T.; Lee, W.; Zhang, J.; Leinenbach, C. Relief of the residual stresses in Si3N4/Invar joints by multi-layered braze structure – experiments and simulation. Ceram. Int. 2016, 42 (4), 7080-7087. https://doi.org/10.1016/j.ceramint.2016.01.096
Detailed Record
Wheeler, J. M.; Thilly, L.; Morel, A.; Taylor, A. A.; Montagne, A.; Ghisleni, R.; Michler, J. The plasticity of indium antimonide: insights from variable temperature, strain rate jump micro-compression testing. Acta Mater. 2016, 106, 283-289. https://doi.org/10.1016/j.actamat.2015.12.036
Detailed Record
de Wild, M.; Amacher, F.; Bradbury, C. R.; Molenberg, A. Investigation of structural resorption behavior of biphasic bioceramics with help of gravimetry, μCT, SEM, and XRD. J. Biomed. Mater. Res. B 2016, 104B (3), 546-553. https://doi.org/10.1002/jbm.b.33419
Detailed Record
Affolter, C.; Müller, U.; Leinenbach, C.; Weisse, B. Compressive testing of ductile high-strength alloys. J. Test. Eval. 2015, 43 (6), 1554-1562. https://doi.org/10.1520/JTE20140301
Detailed Record
Arunnellaiappan, T.; Nagumothu, K. B.; Rama Krishna, L.; Rameshbabu, N. Influence of frequency and duty cycle on microstructure of plasma electrolytic oxidized AA7075 and the correlation to its corrosion behavior. Surf. Coat. Technol. 2015, 280, 136-147. https://doi.org/10.1016/j.surfcoat.2015.08.043
Detailed Record
Bidiville, A.; Wasmer, K.; Van der Meer, M.; Ballif, C. Wire-sawing processes: parametrical study and modeling. Sol. Energy Mater. Sol. Cells 2015, 132, 392-402. https://doi.org/10.1016/j.solmat.2014.09.019
Detailed Record
Crisan, O.; Crisan, A. D.; Mercioniu, I.; Pantelica, D.; Pantelica, D.; Vaucher, S.; Nicula, R.; Stir, M.; Vasiliu, F. Effect of Mn addition on the thermal stability and magnetic properties of rapidly-quenched L10 FePt alloys. Intermetallics 2015, 65, 81-87. https://doi.org/10.1016/j.intermet.2015.06.008
Detailed Record
Czaderski, C.; Weber, B.; Shahverdi, M.; Motavalli, M.; Leinenbach, C.; Lee, W.; Brönnimann, R.; Michels, J. Iron-based shape memory alloys (Fe-SMA) - a new material for prestressing concrete structures. In Proceedings of SMAR 2015 the 3rd conference on smart monitoring, assessment and rehabilitation of civil structures, presented at the Third conference on smart monitoring, assessment and rehabilitation of civil structures (SMAR 2015), Antalya, Turkey, 7-9 September 2015; Ilki, A., Motavalli, M., Inci, P., Köhli, M., Eds.; ITU; Empa: Istanbul; Dübendorf, 2015; p (12 pp.).
Detailed Record
Hammoud, H.; Vaucher, S.; Valdivieso, F. Dielectric and thermal properties of cerium dioxide up to 1000 °C and the effect of the porosity for microwave processing studies. Thermochim. Acta 2015, 617, 83-89. https://doi.org/10.1016/j.tca.2015.08.011
Detailed Record
Kallip, K.; Leparoux, M.; AlOgab, K. A.; Clerc, S.; Deguilhem, G.; Arroyo, Y.; Kwon, H. Investigation of different carbon nanotube reinforcements for fabricating bulk AlMg5 matrix nanocomposites. J. Alloys Compd. 2015, 646, 710-718. https://doi.org/10.1016/j.jallcom.2015.06.169
Detailed Record
Kenel, C.; Leinenbach, C. Influence of cooling rate on microstructure formation during rapid solidification of binary TiAl alloys. J. Alloys Compd. 2015, 637, 242-247. https://doi.org/10.1016/j.jallcom.2015.03.016
Detailed Record
Kwon, H.; Leparoux, M.; Hwang, K.; Choi, J.; Kim, K. Mechanical performance of carbon nanotube-reinforced nanocomposites. In Advanced materials development & performance, presented at the 7th international conference on advanced materials development & performance (AMDP 2014), Busan, Korea, July 17–20, 2014; Kim, Y. H., Ed.; Advanced materials research; Trans Tech Publications: Durnten-Zurich, Switzerland, 2015; Vol. 1110, pp 60-64. https://doi.org/10.4028/www.scientific.net/AMR.1110.60
Detailed Record
Kwon, H.; Kim, S. G.; Lee, B. W.; Seo, W. C.; Leparoux, M. Mechanical properties of nanodiamond and multi-walled carbon nanotubes dual-reinforced aluminum matrix composite materials. Mater. Sci. Eng. A 2015, 632, 72-77. https://doi.org/10.1016/j.msea.2015.02.057
Detailed Record
Le Dantec, M.; Dubach, A.; Unifantowicz, P.; Vaucher, S. Microwave processing of silicon wafers and powder: effect of size and impurities. Presented at the 8th international workshop on crystalline silicon for solar cells, Bamberg, DE, Mai 5-8, 2015.
Detailed Record
Le Dantec, M.; Vaucher, S.; Figi, R.; Hoffmann, P. Towards microwave processing of silicon powder: oxygen measurements. Presented at the EPFL photonics day, Lausanne, CH, November 6, 2015.
Detailed Record
Leinenbach, C.; Transchel, R.; Gorgievski, K.; Kuster, F.; Elsener, H. R.; Wegener, K. Microstructure and mechanical performance of Cu-Sn-Ti-Based active braze alloy containing in situ formed nano-sized TiC particles. J. Mater. Eng. Perform. 2015, 24 (5), 2042-2050. https://doi.org/10.1007/s11665-015-1471-8
Detailed Record
Lis, A.; Leinenbach, C. Effect of process and service conditions on TLP-bonded components with (Ag,Ni–)Sn interlayer combinations. J. Electron. Mater. 2015, 44 (11), 4576-4588. https://doi.org/10.1007/s11664-015-3982-3
Detailed Record
Nadargi, D.; Gurav, J.; Marioni, M. A.; Romer, S.; Matam, S.; Koebel, M. M. Methyltrimethoxysilane (MTMS)-based silica–iron oxide superhydrophobic nanocomposites. J. Colloid Interface Sci. 2015, 459, 123-126. https://doi.org/10.1016/j.jcis.2015.08.018
Detailed Record
Nicula, R.; Crisan, O.; Crisan, A. D.; Mercioniu, I.; Stir, M.; Vasiliu, F. Thermal stability, thermal expansion and grain-growth in exchange-coupled Fe–Pt–Ag–B bulk nanocomposite magnets. J. Alloys Compd. 2015, 622, 865-870. https://doi.org/10.1016/j.jallcom.2014.10.181
Detailed Record
Nowakowska, S.; Wäckerlin, A.; Kawai, S.; Ivas, T.; Nowakowski, J.; Fatayer, S.; Wäckerlin, C.; Nijs, T.; Meyer, E.; Björk, J.; et al. Interplay of weak interactions in the atom-by-atom condensation of xenon within quantum boxes. Nat. Commun. 2015, 6, 6071 (6 pp.). https://doi.org/10.1038/ncomms7071
Detailed Record
Popescu, A. C.; Stan, G. E.; Duta, L.; Nita, C.; Popescu, C.; Surdu, V. A.; Husanu, M. A.; Bita, B.; Ghisleni, R.; Himcinschi, C.; et al. The Role of ambient gas and pressure on the structuring of hard diamond-like carbon films synthesized by pulsed laser deposition. Materials 2015, 8 (6), 3284-3305. https://doi.org/10.3390/ma8063284
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Combinatorial HV-CVD survey of barium triisopropyl cyclopentadienyl and titanium tetraisopropoxide for the deposition of BaTiO3. Phys. Status Solidi A 2015, 212 (7), 1556-1562. https://doi.org/10.1002/pssa.201532326
Detailed Record
Reinke, M.; Ponomarev, E.; Kuzminykh, Y.; Hoffmann, P. Combinatorial characterization of TiO2 chemical vapor deposition utilizing titanium isopropoxide. ACS Comb. Sci. 2015, 17 (7), 413-420. https://doi.org/10.1021/acscombsci.5b00040
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Low temperature chemical vapor deposition using atomic layer deposition chemistry. Chem. Mater. 2015, 27 (5), 1604-1611. https://doi.org/10.1021/cm504216p
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Selective area high vacuum chemical vapor deposition of Titania on functionalized surfaces. Presented at the EuroCVD 20, Sempach, Schweiz, July 13 - 17, 2015.
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Selective growth of titanium dioxide by low-temperature chemical vapor deposition. ACS Appl. Mater. Interfaces 2015, 7 (18), 9736-9743. https://doi.org/10.1021/acsami.5b01561
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Surface kinetics of titanium isopropoxide in high vacuum chemical vapor deposition. J. Phys. Chem. C 2015, 119 (50), 27965-27971. https://doi.org/10.1021/acs.jpcc.5b07177
Detailed Record
Rowthu, S.; Böhlen, K.; Bowen, P.; Hoffmann, P. Surface 3D micro free forms: multifunctional microstructured mesoporous α-alumina by in situ slip casting using excimer laser ablated polycarbonate molds. ACS Appl. Mater. Interfaces 2015, 7 (44), 24458-24469. https://doi.org/10.1021/acsami.5b04748
Detailed Record
Saeidi, F.; Hoffmann, P.; Meylan, B.; Wasmer, K. Effect of surface texturing on tribological behavior of cast iron under starved lubrication. Presented at the WOM2015, wear of materials, Toronto, Canada, April 12-16, 2015.
Detailed Record
Spierings, A. B.; Leinenbach, C.; Kenel, C.; Wegener, K. Processing of metal-diamond-composites using selective laser melting. Rapid Prototyp. J. 2015, 21 (2), 130-136. https://doi.org/10.1108/RPJ-11-2014-0156
Detailed Record
Sriharitha, R.; Balic, E. E.; Hoffmann, P. Wetting and tribological studies of mesoporous α-Al2O3 composite. Presented at the CCMX annual meeting, Bern, CH, May 18, 2015.
Detailed Record
Vaucher, S.; Cervellino, A.; Casati, N.; Mokso, R.; Ishizaki, K.; Stir, M.; Catala-Civera, J. M.; Gozzo, F.; Nicula, R. Real-time material's response to high power microwave irradiation revealed by in-situ synchrotron radiation methods. In 2015 1st URSI atlantic radio science conference (URSI AT-RASC), presented at the 2015 1st URSI atlantic radio science conference (URSI AT-RASC), Las Palmas, Spain, May 16-24, 2015; IEEE, 2015; p 7303067 (1 p.). https://doi.org/10.1109/URSI-AT-RASC.2015.7303067
Detailed Record
Wurm, A.; Herrmann, A.; Cornelius, M.; Zhuravlev, E.; Pospiech, D.; Nicula, R.; Schick, C. Temperature dependency of nucleation efficiency of carbon nanotubes in PET and PBT. Macromol. Mater. Eng. 2015, 300 (6), 637-649. https://doi.org/10.1002/mame.201400405
Detailed Record
Battisti, A.; Esqué-de los Ojos, D.; Ghisleni, R.; Brunner, A. J. Single fiber push-out characterization of interfacial properties of hierarchical CNT-carbon fiber composites prepared by electrophoretic deposition. Compos. Sci. Technol. 2014, 95 (10), 121-127. https://doi.org/10.1016/j.compscitech.2014.02.017
Detailed Record
Bittner, R. W.; Gürth, M.; Duarte, L. I.; Leinenbach, C.; Effenberger, H. S.; Richter, K. W. Al–Ge–Ti: phase equilibria and structural characterization of new ternary compounds. Intermetallics 2014, 53, 157-168. https://doi.org/10.1016/j.intermet.2014.05.003
Detailed Record
Blugan, G.; Hadad, M.; Graule, T.; Kuebler, J. Si3N4–TiN–SiC three particle phase composites for wear applications. Ceram. Int. 2014, 40 (1), 1439-1446. https://doi.org/10.1016/j.ceramint.2013.07.027
Detailed Record
Bradbury, C. R.; Gomon, J. K.; Kollo, L.; Kwon, H.; Leparoux, M. Hardness of Multi Wall Carbon Nanotubes reinforced aluminium matrix composites. J. Alloys Compd. 2014, 585, 362-367. https://doi.org/10.1016/j.jallcom.2013.09.142
Detailed Record
Cladera, A.; Weber, B.; Leinenbach, C.; Czaderski, C.; Shahverdi, M.; Motavalli, M. Iron-based shape memory alloys for civil engineering structures: an overview. Constr. Build. Mater. 2014, 63, 281-293. https://doi.org/10.1016/j.conbuildmat.2014.04.032
Detailed Record
Czaderski, C.; Shahverdi, M.; Brönnimann, R.; Leinenbach, C.; Motavalli, M. Feasibility of iron-based shape memory alloy strips for prestressed strengthening of concrete structures. Constr. Build. Mater. 2014, 56, 94-105. https://doi.org/10.1016/j.conbuildmat.2014.01.069
Detailed Record
Dabirian, A.; Kuzminykh, Y.; Wagner, E.; Benvenuti, G.; Rushworth, S.; Hoffmann, P. Evaluation of niobium dimethylamino-ethoxide for chemical vapour deposition of niobium oxide thin films. Thin Solid Films 2014, 571, 94-101. https://doi.org/10.1016/j.tsf.2014.09.073
Detailed Record
Farah, J.; Nicholson, J.; Thirunavukkarasu, S.; Wasmer, K. Dry-epitaxial lift-off for high efficiency solar cells. In 2014 IEEE 40th photovoltaic specialist conference (PVSC), presented at the 40th IEEE photovoltaic specialist conference (PVSC 2014), Denver, Colorado, June 8-13, 2014; IEEE photovoltaic specialist conference; IEEE: sine loco, 2014; pp 1796-1801. https://doi.org/10.1109/PVSC.2014.6925271
Detailed Record
Graça, S.; Trabadelo, V.; Neels, A.; Kuebler, J.; Le Nader, V.; Gamez, G.; Döbeli, M.; Wasmer, K. Influence of mosaicity on the fracture behavior of sapphire. Acta Mater. 2014, 67, 67-80. https://doi.org/10.1016/j.actamat.2013.12.004
Detailed Record
Kallip, K.; Kollo, L.; Bradbury, C.; Kwon, H.; Leparoux, M. Nanoparticle reinforced Aluminum alloy composites produced by powder metallurgy route. Presented at the MRS fall meeting, Boston, USA, November 30 - December 5, 2014.
Detailed Record
Kwon, H.; Saarna, M.; Yoon, S.; Weidenkaff, A.; Leparoux, M. Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials. Mater. Sci. Eng. A 2014, 590, 338-345. https://doi.org/10.1016/j.msea.2013.10.046
Detailed Record
Kwon, H.; Leparoux, M.; Kawasaki, A. Functionally graded dual-nanoparticulate-reinforced aluminium matrix bulk materials fabricated by spark plasma sintering. J. Mater. Sci. Technol. 2014, 30 (8), 736-742. https://doi.org/10.1016/j.jmst.2014.03.003
Detailed Record
Lis, A.; Park, M. S.; Arroyave, R.; Leinenbach, C. Early stage growth characteristics of Ag3Sn intermetallic compounds during solid–solid and solid–liquid reactions in the Ag–Sn interlayer system: experiments and simulations. J. Alloys Compd. 2014, 617, 763-773. https://doi.org/10.1016/j.jallcom.2014.08.082
Detailed Record
Patil, J. Y.; Nadargi, D. Y.; Gurav, J. L.; Mulla, I. S.; Suryavanshi, S. S. Glycine combusted ZnFe2O4 gas sensor: evaluation of structural, morphological and gas response properties. Ceram. Int. 2014, 40 (7), 10607-10613. https://doi.org/10.1016/j.ceramint.2014.03.041
Detailed Record
Patil, J. Y.; Nadargi, D. Y.; Gurav, J. L.; Mulla, I. S.; Suryavanshi, S. S. Synthesis of glycine combusted NiFe2O4 spinel ferrite: a highly versatile gas sensor. Mater. Lett. 2014, 124, 144-147. https://doi.org/10.1016/j.matlet.2014.03.051
Detailed Record
Peyer, K. E.; Siringil, E.; Zhang, L.; Nelson, B. J. Magnetic polymer composite artificial bacterial flagella. Bioinspir. Biomim. 2014, 9 (4), 046014 (10 pp.). https://doi.org/10.1088/1748-3182/9/4/046014
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Limitations of patterning thin films by shadow mask high vacuum chemical vapor deposition. Thin Solid Films 2014, 563, 56-61. https://doi.org/10.1016/j.tsf.2014.02.088
Detailed Record
Saeidi, F.; Meylan, B.; Hoffmann, P.; Wasmer, K. Effect of surface texturing on cast iron reciprocating against steel under starved lubrication condition. Presented at the Swiss-japanese tribology meeting 2014: energy savings through tribology, Zürich, Switzerland, September 8-10, 2014.
Detailed Record
Schmidt, A. M.; Fagerer, S. R.; Jefimovs, K.; Buettner, F.; Marro, C.; Siringil, E. C.; Boehlen, K. L.; Pabst, M.; Ibáñez, A. J. Molecular phenotypic profiling of a Saccharomyces cerevisiae strain at the single-cell level. Analyst 2014, 139 (22), 5709-5717. https://doi.org/10.1039/C4AN01119H
Detailed Record
Schöbel, M.; Requena, G.; Fiedler, G.; Tolnai, D.; Vaucher, S.; Degischer, H. P. Void formation in metal matrix composites by solidification and shrinkage of an AlSi7 matrix between densely packed particles. Composites A 2014, 66, 103-108. https://doi.org/10.1016/j.compositesa.2014.07.011
Detailed Record
Spierings, A. B.; Leinenbach, C.; Kenel, C.; Wegener, K. Processing of metal-diamond-composites using selective laser melting. In Solid freeform fabrication proceedings, presented at the 25th annual international solid freeform fabrication (SFF) symposium - an additive manufacturing conference, Austin, August 4-6, 2014; University of Texas at Austin: Austin, 2014; pp 764-774.
Detailed Record
Sriharitha, R.; Balic, E. E.; Hoffmann, P. Liquid-repellent wear-resistant material. Presented at the CCMX (competence centre for materials science and technology) annual meeting, Bern, Switzerland, May 8, 2014.
Detailed Record
Stucki, J. D.; Stucki, A. O.; Siringil, E.; Böhlen, K.; Wasmer, K.; Guenat, O. T. Development of a fabrication method for a novel cell culture membrane. Presented at the CTI medtech event, Bern, Switzerland, September 2, 2014.
Detailed Record
Transchel, R.; Leinenbach, C.; Wegener, K. Cutting and ploughing forces for small clearance angles of hexa-octahedron shaped diamond grains. CIRP Ann. Manuf. Tech. 2014, 63 (1), 325-328. https://doi.org/10.1016/j.cirp.2014.03.030
Detailed Record
Vakili-Farahani, F.; Amalfi, R. L.; Thome, J. R. Two-phase flow and building boiling of R245FA in a 1 mm pressing depth plate heat exchanger ― Part I: adiabatic pressure drop. Interfacial Phenom. Heat Transf. 2014, 2 (4), 325-342. https://doi.org/10.1615/InterfacPhenomHeatTransfer.2015012027
Detailed Record
Vakili-Farahani, F.; Amalfi, R. L.; Thome, J. R. Two-phase flow of R245FA in a 1 mm corrugation depth plate heat exchanger ― Part II: flow boiling heat transfer. Interfacial Phenom. Heat Transf. 2014, 2 (4), 343-361. https://doi.org/10.1615/InterfacPhenomHeatTransfer.2015012028
Detailed Record
Vaucher, S.; Mokso, R.; Ishizaki, K.; Stir, M.; Nicula, R. Dynamic high-temperature monitoring of microwave energy absorption and heating of materials with ultrafast in situ synchrotron X-Ray tomographic microscopy and powder diffraction techniques. In Proceedings of the 2nd international congress on 3D materials science, presented at the 2nd international congress on 3D materials science, Annecy, France, June 29–July 2, 2014; Bernard, D., Buffière, J. Y., Pollock, T., Friis Poulsen, H., Rollett, A., Uchic, M., Eds.; Springer: Cham, Switzerland, 2014; pp 105-110. https://doi.org/10.1007/978-3-319-48123-4
Detailed Record
Wurm, A.; Lellinger, D.; Minakov, A. A.; Skipa, T.; Pötschke, P.; Nicula, R.; Alig, I.; Schick, C. Crystallization of poly(ε-caprolactone)/MWCNT composites: a combined SAXS/WAXS, electrical and thermal conductivity study. Polymer 2014, 55 (9), 2220-2232. https://doi.org/10.1016/j.polymer.2014.02.069
Detailed Record
Zeljković, S.; Ivas, T.; Vaucher, S.; Jelić, D.; Gauckler, L. J. The changes of Ba0.5Sr0.5Co0.8Fe0.2O3–δ perovskite oxide on heating in oxygen and carbon dioxide atmospheres. J. Serbian Chem. Soc. 2014, 79 (9), 1141-1154. https://doi.org/10.2298/JSC131024018Z
Detailed Record
Cabanes-Sempere, M.; Catalá-Civera, J. M.; Peñaranda-Foix, F. L.; Cozzo, C.; Vaucher, S.; Pouchon, M. A. Characterization method of dielectric properties of free falling drops in a microwave processing cavity and its application in microwave internal gelation. Meas. Sci. Technol. 2013, 24 (9), 095009 (9 pp.). https://doi.org/10.1088/0957-0233/24/9/095009
Detailed Record
Crisan, O.; Crisan, A. D.; Vasiliu, F.; Mercioniu, I.; Stir, M.; Nicula, R.; Hoffmann, P. Direct formation and thermal stability of exchange-coupled FePt-based nano-composite magnets. Presented at the Fifth seeheim conference on magnetism, Frankfurt, Germany, September 29 - October 3, 2013.
Detailed Record
Hammoud, H.; Vaucher, S.; Valdivieso, F. Effect of the porosity on the thermophysical properties of cerium oxide up to 1300K and their implications for microwave sintering of spherical ceria gels. Presented at the 14th international conference on microwave and high frequency heating (Ampere 2013), Nottingham, UK, September 16–19, 2013; p (4 pp.).
Detailed Record
Kuzminykh, Y.; Reinke, M.; Cosmin Sandu, S.; Benvenuti, G.; Hoffmann, P. Complex decomposition behaviour of Cu(TMHD)2 precursor in high vacuum CVD process: combinatoprial Co-depositon with Ti-Isopropoxide. Presented at the EuroCVD 19, Varna, Bulgaria, September 1-6, 2013.
Detailed Record
Kuzminykh, Y.; Dabirian, A.; Reinke, M.; Hoffmann, P. High vacuum chemical vapour deposition of oxides: A review of technique development and precursor selection. Surf. Coat. Technol. 2013, 230, 13-21. https://doi.org/10.1016/j.surfcoat.2013.06.059
Detailed Record
Kwon, H.; Lee, G. G.; Leparoux, M.; Kawasaki, A. Functionally graded dual-nanoparticulate-reinforced aluminum matrix composite materials. Presented at the 12th international symposium on multiscale, multifunctional and functionally graded materials (FGM 2012), Beijing, China, October 22, 2012; Journal of physics: conference series; IOP Publishing: Bristol; Vol. 419, p 012004 (4 pp.). https://doi.org/10.1088/1742-6596/419/1/012004
Detailed Record
Kwon, H.; Takamichi, M.; Kawasaki, A.; Leparoux, M. Investigation of the interfacial phases formed between carbon nanotubes and aluminum in a bulk material. Mater. Chem. Phys. 2013, 138 (2-3), 787-793. https://doi.org/10.1016/j.matchemphys.2012.12.062
Detailed Record
Mahadik, S. A.; parale, V.; Vhatkar, R. S.; Mahadik, D. B.; Kavale, M. S.; Wagh, P. B.; Gupta, S.; Gurav, J. Superhydrophobic silica coating by dip coating method. Appl. Surf. Sci. 2013, 277, 67-72. https://doi.org/10.1016/j.apsusc.2013.04.001
Detailed Record
Marker, M. C. J.; Duarte, L. I.; Leinenbach, C.; Richter, K. W. Characterization of the Fe-rich corner of Al–Fe–Si–Ti. Intermetallics 2013, 39, 38-49. https://doi.org/10.1016/j.intermet.2013.03.007
Detailed Record
Pathak, S.; Doherty, R. D.; Rollett, A. D.; Michler, J.; Wasmer, K. Caught in the act: grain-switching and quadrijunction formation in annealed aluminum. Scr. Mater. 2013, 69 (1), 37-40. https://doi.org/10.1016/j.scriptamat.2013.03.014
Detailed Record
Pouvreau, C.; Wasmer, K.; Hessler-Wyser, H.; Ganière, J. D.; Breguet, J. M.; Michler, J.; Schulz, D.; Giovanola, J. H. Nanoindentation cracking in gallium arsenide: part II. TEM investigation. J. Mater. Res. 2013, 28 (20), 2799-2809. https://doi.org/10.1557/jmr.2013.275
Detailed Record
Reinke, M.; Dabirian, A.; Kuzminykh, Y.; Hoffmann, P. Combinatorial HV-CVD of oxide thin films for integrated photonic circuits. Presented at the 2013.
Detailed Record
Reinke, M.; Kuzminykh, Y.; Hoffmann, P. Limitations of geometrically controlled growth of TiO2 films by hard shadow mask HV-CVD. Presented at the EuroCVD 19, Varna, Bulgaria, September 2, 2013.
Detailed Record
Reinke, M.; Kuzminykh, Y.; Malandrino, G.; Hoffmann, P. Precursor adsorption efficiency of titanium tetra isopropoxide in the presence of a barium β-diketonate precursor. Surf. Coat. Technol. 2013, 230, 297-304. https://doi.org/10.1016/j.surfcoat.2013.06.016
Detailed Record
Saarna, M.; Sergejev, F.; Gomon, J. K.; Kollo, L.; Leparoux, M. Surface fatigue of Al-metal matrix composites at impact loading. Presented at the 21st international Baltic conference „engineering materials and tribology“ – BALTMATTRIB, Tallinn, Estonia, October 18 – 19, 2012; Hussainova, I., Ed.; Key engineering materials; Trans Tech Publications: sine loco; Vol. 527, pp 119-124. https://doi.org/10.4028/www.scientific.net/KEM.527.119
Detailed Record
Thompson, D.; Leparoux, M.; Jaeggi, C.; Buha, J.; Pui, D. Y. H.; Wang, J. Aerosol emission monitoring in the production of silicon carbide nanoparticles by induction plasma synthesis. J. Nanopart. Res. 2013, 15, 2103 (13 pp.). https://doi.org/10.1007/s11051-013-2103-6
Detailed Record
Transchel, R.; Heini, F.; Stirnimann, J.; Kuster, F.; Leinenbach, C.; Wegener, K. Influence of the clearance angle on the cutting efficiency of blunt, octahedral-shaped diamonds in an active filler alloy. Int. J. Mach. Tools Manuf 2013, 75, 9-15. https://doi.org/10.1016/j.ijmachtools.2013.08.001
Detailed Record
Wasmer, K.; Pouvreau, C.; Breguet, J. M.; Michler, J.; Schulz, D.; Giovanola, J. H. Nanoindentation cracking in gallium arsenide: Part I. In situ SEM nanoindentation. J. Mater. Res. 2013, 28 (20), 2785-2798. https://doi.org/10.1557/jmr.2013.252
Detailed Record
Wasmer, K.; Parlinska-Wojtan, M.; Graça, S.; Michler, J. Sequence of deformation and cracking behaviours of Gallium–Arsenide during nano-scratching. Mater. Chem. Phys. 2013, 138 (1), 38-48. https://doi.org/10.1016/j.matchemphys.2012.10.033
Detailed Record
Bret, T.; Hoffmann, P. How to select compounds for focused charged particle beam assisted etching and deposition. In Nanofabrication using focused ion and electron beams. Principles and applications; Utke, I., Moshkalev, S., Russell, P., Eds.; Oxford series on nanomanufacturing; Oxford University Press: Oxford, 2012; pp 108-125. https://global.oup.com/academic/product/nanofabrication-using-focused-ion-and-electron-beams-9780199734214?q=978-0-19-973421-4&lang=en&cc=ch#
Detailed Record
Buhl, S.; Leinenbach, C.; Spolenak, R.; Wegener, K. Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with a Cu-Sn-based active filler alloy. Int. J. Refract. Met. Hard Mater. 2012, 30 (1), 16-24. https://doi.org/10.1016/j.ijrmhm.2011.06.006
Detailed Record
Cabanes-Sempere, M.; Cozzo, C.; Catalá-Civera, J. M.; Peñaranda-Foix, F. L.; Ishizaki, K.; Vaucher, S.; Pouchon, M. A. Characterization of free falling drops inside a microwave cavity. In 2012 IEEE/MTT-S international microwave symposium digest, presented at the 2012 IEEE/MTT-S international microwave symposium digest, Montreal, Canada, June 17-22, 2012; Microwave, MTT-S international symposium; IEEE: sine loco, 2012; p 6259757. https://doi.org/10.1109/MWSYM.2012.6259757
Detailed Record
Cho, S.; Kikuchi, K.; Kawasaki, A.; Kwon, H.; Kim, Y. Effective load transfer by a chromium carbide nanostructure in a multi-walled carbon nanotube/copper matrix composite. Nanotechnology 2012, 23 (31), 315705 (10 pp.). https://doi.org/10.1088/0957-4484/23/31/315705
Detailed Record
Colombo, V.; Deschenaux, C.; Ghedini, E.; Gherardi, M.; Jaeggi, C.; Leparoux, M.; Mani, V.; Sanibondi, P. Fluid-dynamic characterization of a radio-frequency induction thermal plasma system for nanoparticle synthesis. Plasma Sources Sci. Technol. 2012, 21 (4), 045010 (12 pp.). https://doi.org/10.1088/0963-0252/21/4/045010
Detailed Record
Duarte, L. I.; Viana, F.; Ramos, A. S.; Vieira, M. T.; Leinenbach, C.; Klotz, U. E.; Vieira, M. F. Diffusion bonding of gamma-TiAl using modified Ti/Al nanolayers. J. Alloys Compd. 2012, 536 (S1), S424-S427. https://doi.org/10.1016/j.jallcom.2011.12.037
Detailed Record
Duarte, L. I.; Leinenbach, C.; Klotz, U. E.; Marker, M. C. J.; Richter, K. W.; Löffler, J. F. Experimental study of the FeAl–NiAl–TiAl section. Intermetallics 2012, 23, 80-90. https://doi.org/10.1016/j.intermet.2011.12.007
Detailed Record
Graça, S.; Hadad, M.; Hoffmann, P. Challenges in the quantification of high temperature erosive wear. Mater. Sci. Technol. 2012, 28 (5), 532-535. https://doi.org/10.1179/1743284711Y.0000000036
Detailed Record
Ishizaki, K.; Fahlbusch, S.; Catavala-Civera, J. M.; Vaucher, S.; Utke, I. Development of microwave micro-plasma jet system for removing contamination in scanning electron microscopes. Presented at the Carbon contamination of optics 2012, St. Aubin, France, Juli 16-17, 2012.
Detailed Record
Ishizaki, K.; Stir, M.; Gozzo, F.; Catala-Civera, J. M.; Vaucher, S.; Nicula, R. Magnetic microwave heating of magnetite–carbon black mixtures. Mater. Chem. Phys. 2012, 134 (2-3), 1007-1012. https://doi.org/10.1016/j.matchemphys.2012.03.104
Detailed Record
Jaeggi, C.; Parlinska-Wojtan, M.; Kern, P. Correlation of electrolyte-derived inclusions to crystallization in the early stage of anodic oxide film growth on titanium. Thin Solid Films 2012, 520 (6), 1804-1808. https://doi.org/10.1016/j.tsf.2011.08.092
Detailed Record
Kiley, E. M.; Yakovlev, V. V.; Ishizaki, K.; Vaucher, S. Applicability study of classical and contemporary models for effective complex permittivity of metal powders. J. Microw. Power Electromagn. Energy 2012, 46 (1), 26-38. https://doi.org/10.1080/08327823.2012.11689821
Detailed Record
Kwon, H.; Cho, S.; Leparoux, M.; Kawasaki, A. Dual-nanoparticulate-reinforced aluminum matrix composite materials. Nanotechnology 2012, 23 (22), 225704 (9 pp.). https://doi.org/10.1088/0957-4484/23/22/225704
Detailed Record
Kwon, H.; Leparoux, M. Hot extruded carbon nanotube reinforced aluminum matrix composite materials. Nanotechnology 2012, 23 (41), 415701 (10 pp.). https://doi.org/10.1088/0957-4484/23/41/415701
Detailed Record
Leinenbach, C.; Weyrich, N.; Elsener, H. R.; Gamez, G. Al2O3–Al2O3 and Al2O3–Ti solder joints—influence of ceramic metallization and thermal pretreatment on joint properties. Int. J. Appl. Ceram. Technol. 2012, 9 (4), 751-763. https://doi.org/10.1111/j.1744-7402.2012.02769.x
Detailed Record
Leinenbach, C.; Jin, S.; Wang, J.; Elsener, H. R.; Valenza, F.; Giuranno, D.; Novakovic, R.; Delsante, S.; Borzone, G.; Watson, A.; et al. Au-Ge based alloys for novel high-t lead free solder materials - fundamentals and applications. In ISBC 2012: proceedings from the 5th international brazing and soldering conference, presented at the ISBC 2012, April 22-25, 2012; Gourley, R., Walker, C., Eds.; ASM International: Materials Park, 2012; pp 196-201.
Detailed Record
Leinenbach, C.; Koster, M.; Lis, A.; Schindler, H. J. Defect assessment of brazed steel components. In Brazing and soldering. Proceedings of the 5th international brazing and soldering conference, presented at the 5th international brazing and soldering conference, IBSC 2012, Las Vegas, April 22-25, 2012; Gourley, R., Walker, C., Eds.; IBSC 2012 - Proceedings of the 5th International Brazing and Soldering Conference; .ASM International: Materials Park, 2012; pp 133-138.
Detailed Record
Leinenbach, C.; Kramer, H.; Bernhard, C.; Eifler, D. Thermo-mechanical properties of an Fe–Mn–Si–Cr–Ni–VC shape memory alloy with low transformation temperature. Adv. Eng. Mater. 2012, 14 (1-2), 62-67. https://doi.org/10.1002/adem.201100129
Detailed Record
Lis, A.; Koster, M.; Leinenbach, C. Numerical and experimental investigations on the defect tolerance of brazed steel joints. Mater. Test. 2012, 54 (9), 605-611. https://doi.org/10.3139/120.110372
Detailed Record
Montagne, A.; Rabier, J.; Wheeler, J. M.; Demenet, J. L.; Michler, J.; Ghisleni, R. Plasticité dans les micro piliers de silicium: étude en température. Presented at the Indentation 2012, Lyon, France, November 29, 2012.
Detailed Record
Nicula, R.; Wurm, A.; Schick, D.; Ishizaki, K.; Stir, M.; Vaucher, S.; Zhuravlev, E.; Schick, C. Novel approach for the rapid thermal processing of polymer-metal composites using 2.45 GHz microwave radiation. Presented at the 40th annual conference of the North American thermal analysis society - NATAS 2012, Orlando, Florida, USA, August 12, 2012.
Detailed Record
Pathak, S.; Michler, J.; Wasmer, K.; Kalidindi, S. R. Studying grain boundary regions in polycrystalline materials using spherical nano-indentation and orientation imaging microscopy. J. Mater. Sci. 2012, 47 (2), 815-823. https://doi.org/10.1007/s10853-011-5859-z
Detailed Record
Pfetzing-Micklich, J.; Ghisleni, R.; Simon, T.; Somsen, C.; Michler, J.; Eggeler, G. Orientation dependence of stress-induced phase transformation and dislocation plasticity in NiTi shape memory alloys on the micro scale. Mater. Sci. Eng. A 2012, 538, 265-271. https://doi.org/10.1016/j.msea.2012.01.042
Detailed Record
Reichmann, T. L.; Duarte, L. I.; Effenberger, H. S.; Leinenbach, C.; Richter, K. W. Phase equilibria and structural investigations in the Ni-poor part of the system Al–Ge–Ni. Intermetallics 2012, 28, 84-91. https://doi.org/10.1016/j.intermet.2012.04.002
Detailed Record
Reinke, M.; Dabirian, A.; Kuzminykh, Y.; Hoffmann, P. Deposition of oxide filmes by high vacuum chemical vapor deposition. Presented at the EMRS spring meeting 2012, Lausanne, Switzerland, Juli 23-27, 2012.
Detailed Record
Reinke, M.; Dabirian, A.; Multone, X.; Kuzminykh, Y.; Hoffmann, P. Deposition of oxide films by high vacuum chemical vapor deposition. Presented at the E-MRS 2012 spring meeting, Strasbourg, France, May 15-17, 2012.
Detailed Record
Saeidi, F.; Graça, S.; Wasmer, K.; Hoffmann, P. Laser surface texturing for improved tribological behavior of oil-lubricated sliding surfaces: a statistical parameter study. Presented at the Junior EuroMat 2012, Lausanne, Switzerland, July 23-27, 2012.
Detailed Record
Sriharitha, R.; Balic, E.; Hoffmann, P. Biomimetic liquid-repellent and wear-resistant materia. Presented at the Junior EuroMat 2012, Lausanne, Switzerland, July 23-27, 2012.
Detailed Record
Sriharitha, R.; Balic, E.; Hoffmann, P. Wetting, tribological and mechanical characterizations of nanoporous alumina. Presented at the CCMX annual meeting 2012, Bern, Switzerland, April 25, 2012.
Detailed Record
Thilly, L.; Ghisleni, R.; Swistak, C.; Michler, J. In situ deformation of micro-objects as a tool to uncover the micro-mechanisms of the brittle-to-ductile transition in semiconductors: the case of indium antimonide. Philos. Mag. 2012, 92 (25-27), 3315-3325. https://doi.org/10.1080/14786435.2012.704422
Detailed Record
Wasmer, K.; Gassilloud, R.; Michler, J.; Ballif, C. Analysis of onset of dislocation nucleation during nanoindentation and nanoscratching of InP. J. Mater. Res. 2012, 27 (1), 320-329. https://doi.org/10.1557/jmr.2011.305
Detailed Record
Wellmann, R. G.; Graça, S. Chromite vs. magnetite as an erodent for coatings to be applied in steam turbines. Wear 2012, 296 (1-2), 479-483. https://doi.org/10.1016/j.wear.2012.08.014
Detailed Record
de Hazan, Y.; Knies, F.; Burnat, D.; Graule, T.; Yamada-Pittini, Y.; Aneziris, C.; Kraak, M. Homogeneous functional Ni-P/ceramic nanocomposite coatings via stable dispersions in electroless nickel electrolytes. J. Colloid Interface Sci. 2012, 365 (1), 163-171. https://doi.org/10.1016/j.jcis.2011.09.032
Detailed Record
Bidiville, A.; Neulist, I.; Wasmer, K.; Ballif, C. Effect of debris on the silicon wafering for solar cells. Sol. Energy Mater. Sol. Cells 2011, 95 (8), 2490-2496. https://doi.org/10.1016/j.solmat.2011.04.038
Detailed Record
Cabanes-Sempere, M.; Catalá-Civera, J. M.; Cozzo, C.; Vaucher, S.; Pouchon, M. A. Innovative production of nuclear fuel by microwave internal gelation: theoretical microwaves-microspheres interaction. In Microwave and RF power applications: proceeding of the 13th international conference on microwave and radiofrequency heating, AMPERE 2011, presented at the 13th international conference on microwave and radiofrequency heating, AMPERE 2011, Toulouse, September 5-8, 2011; Editions Cepadues: Toulouse, 2011; pp 231-234.
Detailed Record
Dabirian, A.; Kuzminykh, Y.; Wagner, E.; Benvenuti, G.; Rushworth, S. A.; Hoffmann, P. Chemical vapor deposition kinetics and localized growth regimes in combinatorial experiments. ChemPhysChem 2011, 12 (18), 3524-3528. https://doi.org/10.1002/cphc.201100637
Detailed Record
Dabirian, A.; Harada, S.; Kuzminykh, Y.; Sandu, S. C.; Wagner, E.; Benvenuti, G.; Brodard, P.; Rushworth, S.; Muralt, P.; Hoffmann, P. Combinatorial chemical beam epitaxy of lithium niobate thin films on sapphire. J. Electrochem. Soc. 2011, 158 (2), D72-D76. https://doi.org/10.1149/1.3519843
Detailed Record
Dabirian, A.; Kuzminykh, Y.; Sandu, S. C.; Harada, S.; Wagner, E.; Brodard, P.; Benvenuti, G.; Rushworth, S.; Muralt, P.; Hoffmann, P. Combinatorial high-vacuum chemical vapor deposition of textured hafnium-doped lithium niobate thin films on sapphire. Cryst. Growth Des. 2011, 11 (1), 203-209. https://doi.org/10.1021/cg1011583
Detailed Record
Estili, M.; Kawasaki, A.; Pittini-Yamada, Y.; Utke, I.; Michler, J. In situ characterization of tensile-bending load bearing ability of multi-walled carbon nanotubes in alumina-based nanocomposites. J. Mater. Chem. 2011, 21 (12), 4272-4278. https://doi.org/10.1039/c0jm03906c
Detailed Record
Ghisleni, R.; Liu, J.; Raghavan, R.; Brodard, P.; Lugstein, A.; Wasmer, K.; Michler, J. In situ micro-Raman compression: characterization of plasticity and fracture in GaAs. Philos. Mag. 2011, 91 (7-9), 1286-1292. https://doi.org/10.1080/14786435.2010.495358
Detailed Record
Graça, S.; Carvalho, P. A.; Colaço, R. Dislocation structures in nanoindented ductile metals―a transmission electron microscopy direct observation. J. Phys. D 2011, 44 (33), 335402 (8 pp.). https://doi.org/10.1088/0022-3727/44/33/335402
Detailed Record
Graça, S.; Colaço, R. On the influence of indentation size effect on the wear of metallic alloys. Int. J. Surf. Sci. Eng. 2011, 5 (5-6), 457-462. https://doi.org/10.1504/IJSURFSE.2011.044397
Detailed Record
Heiber, J.; Bloch, R.; Bucher, R.; Habegger, S.; Lombardi, I.; Wasmer, K.; Assi, F.; Beck, A. A review of diamond wire wafering technology at Meyer Burger Ltd. In Manufacturing the solar future. The 2011 production annual; Reddig, K., Ed.; Photovoltaics International: London, 2011; pp 78-85.
Detailed Record
Heiroth, S.; Ghisleni, R.; Lippert, T.; Michler, J.; Wokaun, A. Optical and mechanical properties of amorphous and crystalline yttria-stabilized zirconia thin films prepared by pulsed laser deposition. Acta Mater. 2011, 59 (6), 2330-2340. https://doi.org/10.1016/j.actamat.2010.12.029
Detailed Record
Jaeggi, C.; Frauchiger, V.; Eitel, F.; Stiefel, M.; Schmotzer, H.; Siegmann, S. The effect of surface alloying of Ti powder for vacuum plasma spraying of open porous titanium coatings. Acta Mater. 2011, 59 (2), 717-725. https://doi.org/10.1016/j.actamat.2010.10.010
Detailed Record
Kiley, E. M.; Yakovlev, V. V.; Ishizaki, K.; Vaucher, S. Applicability study of classical and contemporary models for effective complex permittivity of metal powders. In Microwave and RF power applications. 13th international conference AMPERE. Toulouse 2011, presented at the AMPERE 2011, Toulouse, September 5-8, 2011; Tao, J., Ed.; Cépadués: Toulouse, 2011; pp 314-317.
Detailed Record
Kollo, L.; Bradbury, C. R.; Veinthal, R.; Jäggi, C.; Carreño-Morelli, E.; Leparoux, M. Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation. Mater. Sci. Eng. A 2011, 528 (21), 6606-6615. https://doi.org/10.1016/j.msea.2011.05.037
Detailed Record
Kurita, H.; Kwon, H.; Kawasaki, A. 放電プラズマ焼結/熱間押出し複合プロセスによるカーボンナノチューブ分散強化型Al基複合材料の作製. Fabrication of carbon nanotube reinforced aluminum matrix composite by spark plasma sintering and hot extrusion hybrid process. J. Jpn. Inst. Metals 2011, 75 (4), 259-264. https://doi.org/10.2320/jinstmet.75.259
Detailed Record
Kwon, H.; Kurita, H.; Leparoux, M.; Kawasaki, A. Carbon nanofiber reinforced aluminum matrix composite fabricated by combined process of spark plasma sintering and hot extrusion. J. Nanosci. Nanotechnol. 2011, 11 (5), 4119-4126. https://doi.org/10.1166/jnn.2011.3866
Detailed Record
Kwon, H.; Kim, S.; Kwon, A.; Chung, U.; Cho, H.; Kurita, H.; Kawasaki, A.; Leparoux, M. Carbon nanotube gradient layers reinforced aluminum matrix composite materials. Presented at the 18th international conference on composites materials, Jeju Island, S. Korea, August 21-26, 2011.
Detailed Record
Kwon, H.; Bradbury, C. R.; Leparoux, M. Fabrication of functionally graded carbon nanotube-reinforced aluminum matrix composite. Adv. Eng. Mater. 2011, 13 (4), 325-329. https://doi.org/10.1002/adem.201000251
Detailed Record
Kwon, H.; Leparoux, M.; Heintz, J. M.; Silvain, J. F.; Kawasaki, A. Fabrication of single crystalline diamond reinforced aluminum matrix composite by powder metallurgy route. Met. Mater. Int. 2011, 17 (5), 755-763. https://doi.org/10.1007/s12540-011-1010-6
Detailed Record
Leinenbach, C.; Valenza, F.; Giuranno, D.; Elsener, H. R.; Jin, S.; Novakovic, R. Wetting and soldering behavior of eutectic Au-Ge alloy on Cu and Ni substrates. J. Electron. Mater. 2011, 40 (7), 1533-1541. https://doi.org/10.1007/s11664-011-1639-4
Detailed Record
Nicula, R.; Stir, M.; Wurm, A.; Catalá-Civera, J. M.; Ishizaki, K.; Vaucher, S.; Zhuravlev, E.; Schick, C. Microwave calorimetry using X-rays. Thermochim. Acta 2011, 526 (1-2), 137-142. https://doi.org/10.1016/j.tca.2011.09.007
Detailed Record
Nicula, R.; Ishizaki, K.; Stir, M.; Shen, Z.; Vaucher, S. Rapid synthesis and densification of single-phase Al-Cu-Fe quasicrystals by spark plasma sintering or microwave heating. Philos. Mag. 2011, 91 (19-21), 2450-2457. https://doi.org/10.1080/14786435.2010.511601
Detailed Record
Pittini-Yamada, Y.; Périgo, E. A.; Nakahara, S.; DeHazan, Y.; Eskandarpour, A.; Meyer, C.; Erni, M.; Pittini, R. Dynamic magnetic properties of electrically insulated iron cores. In Proceedings of the euro international powder metallurgy congress and exhibition, Euro PM 2011, presented at the European international powder metallurgy congress and exhibition, Euro PM 2011, Barcelona, October 9-12, 2011; European Powder Metallurgy Association (EPMA): Chantilly, 2011; p 5 pp.
Detailed Record
Pittini-Yamada, Y.; Périgo, E. A.; de Hazan, Y.; Nakahara, S. Permeability of hybrid soft magnetic composites. Acta Mater. 2011, 59 (11), 4291-4302. https://doi.org/10.1016/j.actamat.2011.03.053
Detailed Record
Périgo, E. A.; Nakahara, S.; Pittini-Yamada, Y.; de Hazan, Y.; Graule, T. Magnetic properties of soft magnetic composites prepared with crystalline and amorphous powders. J. Magn. Magn. Mater. 2011, 323 (15), 1938-1944. https://doi.org/10.1016/j.jmmm.2011.02.025
Detailed Record
Schöbel, M.; Altendorfer, W.; Degischer, H. P.; Vaucher, S.; Buslaps, T.; Michiel, M. D.; Hofmann, M. Internal stresses and voids in SiC particle reinforced aluminum composites for heat sink applications. Compos. Sci. Technol. 2011, 71 (5), 724-733. https://doi.org/10.1016/j.compscitech.2011.01.020
Detailed Record
Vaucher, S.; Stir, M.; Ishizaki, K.; Català-Civera, J. M.; Nicula, R. Reactive synthesis of Ti-Al intermetallics during microwave heating in an E-field maximum. Thermochim. Acta 2011, 522 (1-2), 151-154. https://doi.org/10.1016/j.tca.2010.11.026
Detailed Record
Wang, L.; Montagne, F.; Hoffmann, P.; Heinzelmann, H.; Pugin, R. Hierarchical positioning of gold nanoparticles into periodic arrays using block copolymer nanoring templates. J. Colloid Interface Sci. 2011, 356 (2), 496-504. https://doi.org/10.1016/j.jcis.2010.12.081
Detailed Record
Bidiville, A.; Heiber, J.; Wasmer, K.; Habegger, S.; Assi, F. Diamond wire wafering: wafer morphology in comparison to slurry sawn wafers. Presented at the 25th European Photovoltaic Solar Energy Conference and Exhibition (25th EU PVSEC); 5th World Conference on Photovoltaic Energy Conversion (WCPEC-5), Valencia, Spain, September 6–10, 2010; pp 1673-1676. https://doi.org/10.4229/25thEUPVSEC2010-2CV.1.78
Detailed Record
Bidiville, A.; Wasmer, K.; Michler, J.; Nasch, P. M.; Van Der Meer, M.; Ballif, C. Mechanisms of wafer sawing and impact on wafer properties. Prog. Photovolt. 2010, 18 (8), 563-572. https://doi.org/10.1002/pip.972
Detailed Record
Bidiville, A. Wafer sawing processes: from microscopic phenomena to macroscopic properties. Doctoral dissertation, Université de Neuchâtel, Switzerland, 2010, 182 p. http://doc.rero.ch/record/20349?ln=en
Detailed Record
Bradbury, C. R.; Kuster, L.; Fermín, D. J. Electrochemical reactivity of HOPG electrodes modified by ultrathin films and two-dimensional arrays of metal nanoparticles. J. Electroanal. Chem. 2010, 646 (1-2), 114-123. https://doi.org/10.1016/j.jelechem.2010.04.015
Detailed Record
Buhl, S.; Leinenbach, C.; Spolenak, R.; Wegener, K. Influence of the brazing parameters on microstructure, residual stresses and shear strength of diamond-metal joints. J. Mater. Sci. 2010, 45 (16), 4358-4368. https://doi.org/10.1007/s10853-010-4260-7
Detailed Record
Buhl, S.; Leinenbach, C.; Spolenak, R.; Wegener, K. Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with CuSnTiZr filler alloy as a function of brazing parameters. In Brazing, high temperature brazing and diffusion bonding. Lectures and posters of the 9th international conference taking place in Aachen on 15th to 17th June 2010, presented at the 9th international conference on brazing, high temperature brazing and diffusion bonding 2010, Aachen, Germany, June 15–17, 2010; DVS Berichte; DVS Media, 2010; Vol. 263, pp 243-247.
Detailed Record
Dabirian, A.; Kuzminykh, Y.; Afra, B.; Harada, S.; Wagner, E.; Sandu, C. S.; Benvenuti, G.; Rushworth, S.; Muralt, P.; Hoffmann, P. Combinatorial discovery and optimization of amorphous HfO2–Nb2O5 mixture with improved transparency. Electrochem. Solid-State Lett. 2010, 13 (7), G60-G63. https://doi.org/10.1149/1.3407618
Detailed Record
Dabirian, A.; Kuzminykh, Y.; Harada, S.; Parsons, C.; Sandu, S. C.; Wagner, E.; Benvenuti, G.; Rushworth, S.; Muralt, P.; Hoffmann, P. Efficient optimization of high vacuum chemical vapor deposition of niobium oxide on full wafer scale. In Fundamentals and technology of multifunctional oxide thin films (symposium G, EMRS 2009 spring meeting) 8–12 June 2009, Strasbourg, France, presented at the Symposium G, E-MRS 2009 spring meeting, Strasbourg, France, June 8-9, 2009; IOP conference series: materials science and engineering; IOP Publishing: sine loco, 2010; Vol. 8, p 012026 (4 pp.). https://doi.org/10.1088/1757-899X/8/1/012026
Detailed Record
Duarte, L. I.; Klotz, U. E.; Leinenbach, C.; Palm, M.; Stein, F.; Löffler, J. F. Experimental study of the Fe-Ni-Ti system. Intermetallics 2010, 18 (3), 374-384. https://doi.org/10.1016/j.intermet.2009.08.008
Detailed Record
Elsener, H. R.; Leinenbach, C.; Neuenschwander, J.; Wurz, P.; Piazza, D. Fügen einer beheizbaren Metall-Keramik-Struktur mit eutektischem Au-Ge Lot. In Brazing, high temperature brazing and diffusion bonding. Lectures and posters of the 9th international conference taking place in Aachen on 15th to 17th June 2010, presented at the 9th international conference on brazing, high temperature brazing and diffusion bonding 2010, Aachen, Germany, June 15–17, 2010; DVS Berichte; DVS Media, 2010; Vol. 263, pp 93-97.
Detailed Record
Ishizaki, K.; Battabyal, M.; Yamada Pittini, Y.; Nicula, R.; Vaucher, S. Microwave sintering explored by X-ray microtomography. In Advances in sintering science and technology, presented at the International conference on sintering 2008, La Jolla, California, USA, November 16-20, 2008; Bordia, R. K., Olevsky, E. A., Eds.; Ceramic transactions; Wiley: Hoboken, 2010; Vol. 209, pp 211-217. https://doi.org/10.1002/9780470599730.ch21
Detailed Record
Kollo, L.; Leparoux, M.; Bradbury, C. R.; Kommel, L.; Carreño-Morelli, E.; Rodríguez-Arbaizar, M. Hardness of hot consolidated Al-SiC nanocomposites from planetary milled powders. In Powder manufacturing & processing, miniaturization & nanotechnology, powder pressing, presented at the World PM2010 congress & exhibition, Florence, Italy, October 10-14, 2010; Proceedings. World powder metallurgy congress & exhibition, PM2010; European Powder Metallurgy Association (EPMA): Shrewsbury, 2010; Vol. 1, pp 341-346.
Detailed Record
Kollo, L.; Leparoux, M.; Bradbury, C. R.; Jäggi, C.; Carreño-Morelli, E.; Rodríguez-Arbaizar, M. Investigation of planetary milling for nano-silicon carbide reinforced aluminium metal matrix composites. J. Alloys Compd. 2010, 489 (2), 394-400. https://doi.org/10.1016/j.jallcom.2009.09.128
Detailed Record
Kuzminykh, Y.; Dabirian, A.; Afra, B.; Harada, S.; Wagner, E.; Sandu, S. C.; Benvenuti, G.; Rushworth, S.; Muralt, P.; Hoffmann, P. Amorphous nature, high refractive index and wide transparency range of mixed HfO2–Nb2O5 oxide films. Presented at the E-MRS 2010 spring meeting, Strasbourg, France, June 7-11, 2010.
Detailed Record
Leinenbach, C.; Al-Badri, A.; Roth, M. Interface microstructure of Stellite-6 coatings on a 12%Cr steel after long term thermal exposure. Mater.wiss. Werkst.tech. 2010, 41 (10), 861-868. https://doi.org/10.1002/mawe.201000675
Detailed Record
Leparoux, M.; Leconte, Y.; Wirth, A.; Buehler, T. In situ treatment of thermal RF plasma processed nanopowders to control their agglomeration and dispersability. Plasma Chem. Plasma Process. 2010, 30 (6), 779-793. https://doi.org/10.1007/s11090-010-9258-z
Detailed Record
Nakahara, S.; Périgo, E. A.; Pittini-Yamada, Y.; de Hazan, Y.; Graule, T. Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: identification of the oxide layer and its thickness control. Acta Mater. 2010, 58 (17), 5695-5703. https://doi.org/10.1016/j.actamat.2010.06.044
Detailed Record
Navarro-Fuster, V.; Boj, P. G.; Villalvilla, J. M.; Quintana, J. A.; Díaz-García, M. A.; Trabadelo, V.; Juarros, A.; Retolaza, A.; Merino, S. Second-order distributed feedback lasers based on films containing perylenediimide derivatives. Presented at the SPIE photonics Europe, Brussels, Belgium, April 12-16, 2010; Heremans, P. L., Coehoorn, R., Adachi, C., Eds.; Proceedings of SPIE; SPIE: Bellingham, WA, USA; Vol. 7722, p 77221G (9 pp.). https://doi.org/10.1117/12.854281
Detailed Record
Nicula, R.; Stir, M.; Ishizaki, K.; Vaucher, S. Mechanisms of microwave energy absorption in metallic alloys revealed by in-situ real-time synchrotron radiation experiments. Presented at the 11th Lähnwitzseminar on calorimetry, Rostock, Germany, 6-11 June 2010.
Detailed Record
Nicula, R.; Ishizaki, K.; Stir, M.; Shen, Z.; Vaucher, S. Rapid synthesis and densification of single-phase Al-Cu-Fe quasicrystals by spark plasma sintering or microwave heating. Presented at the 11th international conference on quasicrystals (ICQ11), Sapporo, Japan, June 13-18, 2010.
Detailed Record
Pouchon, M. A.; Chen, J.; Ghisleni, R.; Michler, J.; Hoffelner, W. Characterization of irradiation damage of ferritic ODS alloys with advanced micro-sample methods. Exp. Mech. 2010, 50 (1), 79-84. https://doi.org/10.1007/s11340-008-9214-5
Detailed Record
Raghavan, R.; Boopathy, K.; Ghisleni, R.; Pouchon, M. A.; Ramamurty, U.; Michler, J. Ion irradiation enhances the mechanical performance of metallic glasses. Scr. Mater. 2010, 62 (7), 462-465. https://doi.org/10.1016/j.scriptamat.2009.12.013
Detailed Record
Rodríguez-Arbaizar, M.; Hamdan, H.; Leparoux, M.; Kollo, L.; Kwon, H.; Carreño-Morelli, E. Net-shape Al6061/SiC nanocomposites by powder injection moulding. In PM lightweight & porous materials, powder injection moulding, PM biomaterials, presented at the World PM2010 congress & exhibition, Florence, Italy, October 10-14, 2010; Proceedings. World powder metallurgy congress & exhibition, PM2010; European Powder Metallurgy Association (EPMA): Shrewsbury, 2010; Vol. 4, pp 429-434.
Detailed Record
Schöbel, M.; Degischer, H. P.; Vaucher, S.; Hofmann, M.; Cloetens, P. Reinforcement architectures and thermal fatigue in diamond particle-reinforced aluminum. Acta Mater. 2010, 58 (19), 6421-6430. https://doi.org/10.1016/j.actamat.2010.08.004
Detailed Record
Unifantowicz, P.; Vaucher, S.; Lewandowska, M.; Kurzydłowski, K. J. Mechanism of SiC crystals growth on {100} and {111} diamond surfaces upon microwave heating. Mater. Charact. 2010, 61 (6), 648-652. https://doi.org/10.1016/j.matchar.2010.03.010
Detailed Record
Vaucher, S.; Bernau, L.; Stir, M.; Ishizaki, K.; Català-Civera, J. M.; Nicula, R. Microwave-induced electromigration in multicomponent metallic alloys. In 2010 IEEE MTT-S international microwave symposium (MTT), presented at the 2010 IEEE MTT-S international microwave symposium (MTT), Anaheim, CA, USA, May 23-28, 2010; IEEE MTT-S international microwave symposium digest; IEEE, 2010; pp 1440-1443. https://doi.org/10.1109/MWSYM.2010.5517705
Detailed Record
Wasmer, K.; Nikbin, K. M.; Webster, G. A. Influence of reference stress formulae on creep and creep-fatigue crack initiation and growth prediction in plate components. Int. J. Press. Vessels Pip. 2010, 87 (8), 447-456. https://doi.org/10.1016/j.ijpvp.2010.07.007
Detailed Record
Beaucamp-Ricard, C.; Dubois, L.; Vaucher, S.; Cresson, P. Y.; Lasri, T.; Pribetich, J. Temperature measurement by microwave radiometry: application to microwave sintering. IEEE Trans. Instrum. Meas. 2009, 58 (5), 1712-1719. https://doi.org/10.1109/TIM.2008.2009189
Detailed Record
Bret, T.; Hoffmann, P.; Utke, I. Characterization of focused electron beam (25 keV) deposited materials from organic precursors. Presented at the ESF COST conference electron controlled chemical lithography, Istanbul, Turkey, June 5-8, 2009.
Detailed Record
Dabirian, A.; Kuzminykh, Y.; Sandu, S. C.; Wagner, E.; Benvenuti, G.; Parsons, C.; Rushworth, S.; Hoffmann, P. Combinatorial chemical vapor deposition of lithium niobate thin films. Presented at the 216th meeting of the electrochemical society, Vienna, Austria, October 4–9, 2009; Swihart, M., Barreca, D., Adomaitis, R., Worhoff, K., Eds.; ECS transactions; The Electrochemical Society: Pennington, NJ; Vol. 25, pp 1221-1228. https://doi.org/10.1149/1.3207727
Detailed Record
Derler, S.; Gerhardt, L. C.; Lenz, A.; Bertaux, E.; Hadad, M. Friction of human skin against smooth and rough glass as a function of the contact pressure. Tribol. Int. 2009, 42 (11-12), 1565-1574. https://doi.org/10.1016/j.triboint.2008.11.009
Detailed Record
Derler, S.; Huber, R.; Feuz, H. P.; Hadad, M. Influence of surface microstructure on the sliding friction of plantar skin against hard substrates. Wear 2009, 267 (5-8), 1281-1288. https://doi.org/10.1016/j.wear.2008.12.053
Detailed Record
Dong, Z.; Klotz, U. E.; Leinenbach, C.; Bergamini, A.; Czaderski, C.; Motavalli, M. A novel Fe-Mn-Si shape memory alloy with improved shape recovery properties by VC precipitation. Adv. Eng. Mater. 2009, 11 (1-2), 40-44. https://doi.org/10.1002/adem.200800312
Detailed Record
Dubach, A.; Prasad, K. E.; Raghavan, R.; Löffler, J. F.; Michler, J.; Ramamurty, U. Free-volume dependent pressure sensitivity of Zr-based bulk metallic glass. J. Mater. Res. 2009, 24 (8), 2697-2704. https://doi.org/10.1557/jmr.2009.0304
Detailed Record
Dubach, A.; Raghavan, R.; Löffler, J. F.; Michler, J.; Ramamurty, U. Micropillar compression studies on a bulk metallic glass in different structural states. Scr. Mater. 2009, 60 (7), 567-570. https://doi.org/10.1016/j.scriptamat.2008.12.013
Detailed Record
Hadad, M.; Hitzek, R.; Michler, J.; Lesage, J. Tribological behaviour of sandwich structured Wc-Co-Cr thermally sprayed coatings. Presented at the ECOTRIB 2009 - 2nd european conference on tribology, Pisa, Italy, 7-10 June 2009; p 8 pp.
Detailed Record
Hadad, M.; Bandyopadhyay, P. P.; Michler, J.; Lesage, J. Tribological behaviour of thermally sprayed Ti-Cr-Si coatings. Wear 2009, 267 (5-8), 1002-1008. https://doi.org/10.1016/j.wear.2009.01.013
Detailed Record
Jaeggi, C.; Mooser, R.; Frauchiger, V.; Wyss, P. 3D characterization of open porous vacuum plasma sprayed titanium coatings by means of high resolution micro computer tomography. Mater. Lett. 2009, 63 (30), 2643-2645. https://doi.org/10.1016/j.matlet.2009.09.023
Detailed Record
Leinenbach, C.; Eifler, D. Influence of oxidation treatment on fatigue and fatigue-induced damage of commercially pure titanium. Acta Biomater. 2009, 5 (7), 2810-2819. https://doi.org/10.1016/j.actbio.2009.03.029
Detailed Record
Luo, L.; Kuzminykh, Y.; Catalano, M. R.; Malandrino, G.; Hoffmann, P. Optimization of calcium precursor transport for high vacuum chemical vapor deposition (HVCVD). In EuroCVD 17/CVD 17, presented at the EuroCVD 17/CVD 17, Vienna, Austria, October 4-9, 2009; Swihart, M., Barreca, D., Adomaitis, R., Worhoff, K., Eds.; ECS transactions; IOP Publishing: sine loco, 2009; Vol. 25, pp 173-179. https://doi.org/10.1149/1.3207588
Detailed Record
Mudry, S.; Korolyshyn, A.; Shtablavyi, I.; Kulyk, Y.; Klotz, U. E.; Leinenbach, C. The structure changes in Sn1-xTix alloys at transition from liquid to solid state. Phys. Chem. Liq. 2009, 47 (4), 437-446. https://doi.org/10.1080/00319100802104863
Detailed Record
Nicula, R.; Ishizaki, K.; Stir, M.; Catala-Civera, J. M.; Vaucher, S. Microwave energy absorption driven by dynamic structural and magnetization states in Fe85B15 metallic glass ribbons. Appl. Phys. Lett. 2009, 95 (17), 174104 (3 pp.). https://doi.org/10.1063/1.3257697
Detailed Record
Nicula, R.; Stir, M.; Ishizaki, K.; Catalá-Civera, J. M.; Vaucher, S. Nanocrystallization of amorphous alloys using microwaves: in situ time-resolved synchrotron radiation studies. Presented at the 13th international conference on rapidly quenched and metastable materials, Dresden, Germany, August 24–29, 2008; Journal of physics: conference series; IOP Publishing: Bristol; Vol. 144, p 012109 (4 pp.). https://doi.org/10.1088/1742-6596/144/1/012109
Detailed Record
Nicula, R.; Stir, M.; Ishizaki, K.; Català-Civera, J. M.; Vaucher, S. Rapid nanocrystallization of soft-magnetic amorphous alloys using microwave induction heating. Scr. Mater. 2009, 60 (2), 120-123. https://doi.org/10.1016/j.scriptamat.2008.09.019
Detailed Record
Rzepiejewska-Malyska, K.; Parlinska-Wojtan, M.; Wasmer, K.; Hejduk, K.; Michler, J. In situ SEM indentation studies of the deformation mechanisms in TiN, CrN and TiN/CrN. Micron 2009, 40 (1), 22-27. https://doi.org/10.1016/j.micron.2008.02.013
Detailed Record
Schöbel, M.; Fiedler, G.; Degischer, H. P.; Altendorfer, W.; Vaucher, S. The effects of different architectures on thermal fatigue in particle reinforced MMC for heat sink applications. In 1st international conference on new materials for extreme environment, presented at the 1st international conference on new materials for extreme environments, San Sebastian, Spain, June 2-4, 2008; Linsmeier, C., Reinelt, M., Eds.; Advanced materials research; Trans Tech Publications Ltd.: Baech, Switzerland, 2009; Vol. 59, pp 177-181. https://doi.org/10.4028/3-908454-01-8.177
Detailed Record
Stir, M.; Ishizaki, K.; Vaucher, S.; Nicula, R. Mechanism and kinetics of the reduction of magnetite to iron during heating in a microwave E-field maximum. J. Appl. Phys. 2009, 105 (12), 124901 (4 pp.). https://doi.org/10.1063/1.3148264
Detailed Record
Unifantowicz, P.; Boguszewski, T.; Ciupiński, Ł.; Fortuna, E.; Lewandowska, M.; Vaucher, S.; Kurzydłowski, J. FEM modeling of structure and properties of composites developed for thermal management applications. Presented at the 1st international conference on new materials for extreme environment, San Sebastian, Spain, June 2-4, 2009.
Detailed Record
Unifantowicz, P.; Boguszewski, T.; Ciupinksi, Ł.; Fortuna, E.; Lewandowska, M.; Vaucher, S.; Kurzydłowski, K. J. FEM modeling of structure and properties of diamond-SiC-(Al) composites developed for thermal management applications. In 1st international conference on new materials for extreme environments, presented at the 1st international conference on new materials for extreme environment, San Sebastian, Spain, June 2–4, 2008; Linsmeier, C., Reinelt, M., Eds.; Advanced materials research; Trans Tech Publications: Durnten-Zurich, Switzerland, 2009; Vol. 59, pp 173-176. https://doi.org/10.4028/www.scientific.net/AMR.59.173
Detailed Record
Vecchione, N.; Wasmer, K.; Balint, D. S.; Nikbin, K. Characterization of EB-PVD yttrium-stabilised zirconia by nanoindentation. Surf. Coat. Technol. 2009, 203 (13), 1743-1747. https://doi.org/10.1016/j.surfcoat.2008.11.016
Detailed Record
Wasmer, K.; Nikbin, K. M.; Webster, G. A. A sensitivity study of creep crack growth in plates to references stress formulate. In Creep & fracture in high temperature components: design & life assessments issues: proceedings, 2nd ECCC creep conference, April 21-23, 2009, Zurich, Switzerland, presented at the 2nd ECCC creep conference, Zurich, Switzerland, April 21-23, 2009; Shibli, I. A., Holdsworth, S. R., Eds.; DEStech Publications, Inc: Lancaster, Pennsylvania, USA, 2009; pp 1294-1307.
Detailed Record
Wasmer, K.; Bidiville, A.; Ballif, C.; Van der Meer, M.; Nasch, P. M. Study of the influence of feed rate and wire tension on the mechanical stability of wire-sawn silicon wafers. Presented at the 3rd international workshop on crystalline silicon solar cells, Trondheim, Norway, June 3-5, 2009; p (4pp.).
Detailed Record
Bandyopadhyay, P. P.; Siegmann, S. An investigation of the effect of processing conditions on the microstructure of vacuum plasma-sprayed Ti-Zr-Ni quasicrystal coatings. J. Coat. Technol. Res. 2008, 5 (3), 379-383. https://doi.org/10.1007/s11998-008-9100-1
Detailed Record
Bandyopadhyay, P. P.; Siegmann, S.; Hadad, M.; Jaeggi, C. Microstructural and tribological aspects of thermally sprayed Ti-Cr-Si coatings. In Thermal spray crossing borders. International thermal spray conderence & exposition ITSC2008, presented at the International thermal spray conderence & exposition ITSC2008, Maastricht, The Netherlands, June 2-4, 2008; Marple, B. R., Li, C. J., Hyland, M. M., Lima, R. S., Lau, Y. C., Montavon, G., Eds.; Springer: sine loco, 2008; p (8 pp.).
Detailed Record
Bandyopadhyay, P. P.; Hadad, M.; Jaeggi, C.; Siegmann, S. Microstructural, tribological and corrosion aspects of thermally sprayed Ti-Cr-Si coatings. Surf. Coat. Technol. 2008, 203 (1-2), 35-45. https://doi.org/10.1016/j.surfcoat.2008.07.026
Detailed Record
Battabyal, M.; Beffort, O.; Kleiner, S.; Vaucher, S.; Rohr, L. Heat transport across the metal-diamond interface. Diam. Relat. Mater. 2008, 17 (9-10), 1438-1442. https://doi.org/10.1016/j.diamond.2008.01.023
Detailed Record
Bednarcik, J.; Saksl, K.; Nicula, R.; Roth, S.; Franz, H. Influence of cryomilling on structure of CoFeZrB alloy. J. Non-Cryst. Solids 2008, 354 (47-51), 5117-5119. https://doi.org/10.1016/j.jnoncrysol.2008.06.106
Detailed Record
Bidiville, A.; Wasmer, K.; Michler, J.; Ballif, C.; Van der Meer, M.; Nasch, P. M. Towards the correlation of mechanical properties and sawing parameters of silicon wafers. In Proceedings of the 22nd European photovoltaic solar energy conference, presented at the 22nd European photovoltaic solar energy conference, Milan, Italy, September 3-7, 2007; 2008; pp 1130-1134.
Detailed Record
Bradbury, C. R.; Maniura, K.; Lischer, S.; Grubelnik, A.; Ren, Q.; Gruner, P.; Roques, A. Crystallinity of hydroxyapatite coatings for implant application. Presented at the Medtech event 2008, Bern, Switzerland, September 2, 2008; p 1.
Detailed Record
Cresson, P. Y.; Ricard, C.; Dubois, L.; Vaucher, S.; Lasri, T.; Pribetich, J. Temperature measurement by microwave radiometry. In I2MTC 2008 IEEE international instrumentation and measurement technology conference proceedings, presented at the I2MTC 2008 IEEE international instrumentation and measurement technology conference proceedings, Victoria, BC, Canada, May 12-15, 2008; IEEE: sine loco, 2008; pp 1344-1349. https://doi.org/10.1109/IMTC.2008.4547251
Detailed Record
Hadad, M.; Hockauf, M.; Meyer, L. W.; Marot, G.; Lesage, J.; Hitzek, R.; Siegmann, S. Adhesion evaluation of multilayered based WC-Co-Cr thermally sprayed coatings. Surf. Coat. Technol. 2008, 202 (18), 4399-4405. https://doi.org/10.1016/j.surfcoat.2008.04.016
Detailed Record
Ishizaki, K.; Nagata, K. Carbothermal reduction of magnetite by microwave irradiation. In Global congress on microwave energy applications GCMEA 2008 MAJIC 1st. Proceedings. "The new flame for humanity", presented at the Global congress on microwave energy applications GCMEA 2008 MAJIC 1st, Otsu, Japan, August 4-8, 2008; GCMEA; MAJIC: sine loco, 2008; pp 453-456.
Detailed Record
Ishizaki, K.; Nagata, K. Microwave induced solid-solid reactions between Fe3O4 and carbon black powders. ISIJ Int. 2008, 48 (9), 1159-1164. https://doi.org/10.2355/isijinternational.48.1159
Detailed Record
Jäggi, C.; Leparoux, M.; Frauchiger, V.; Tommasini, R.; Eitel, F.; Dirix, Y.; Wyss, P.; Mooser, R. Thermally sprayed open porous titanium coatings: 3D structure and customized porosity. Presented at the KTI/CTI medtech event, Bern, Switzerland, September 4, 2008.
Detailed Record
Leconte, Y.; Leparoux, M.; Portier, X.; Herlin-Boime, N. Controlled synthesis of β-SiC nanopowders with variable stoichiometry using inductively coupled plasma. Plasma Chem. Plasma Process. 2008, 28 (2), 233-248. https://doi.org/10.1007/s11090-007-9072-4
Detailed Record
Leinenbach, C.; Al-Badri, A.; Roth, M.; Hadad, M.; Scarlin, B.; Staubli, M.; Hitzek, R.; Bürgler, P.; Nicoll, A.; Damani, R.; et al. Coatings for valves and blades in steam turbines. Presented at the 2008.
Detailed Record
Leinenbach, C.; Al-Badri, A.; Roth, M. Influence of thermal exposure on the interfacial microstructure of Stellite 6 coated 9-12%-Cr steels for steam turbine applications. In Materials science & technology conference and exhibition (MS&T'08), presented at the Materials science & technology 2008 conference, MS&T'08, Pittsburgh, Pennsylvania, United States, October 5-9, 2008; Materials Science and Technology (MS&T): sine loco, 2008; Vol. 4, pp 2130-2138.
Detailed Record
Leparoux, M.; Schreuders, C.; Fauchais, P. Improved plasma synthesis of Si-nanopowders by quenching. Adv. Eng. Mater. 2008, 10 (12), 1147-1150. https://doi.org/10.1002/adem.200800217
Detailed Record
Leparoux, M.; Kihn, Y.; Paris, S.; Schreuders, C. Microstructure analysis of RF plasma synthesized TiCN nanopowders. Int. J. Refract. Met. Hard Mater. 2008, 26 (4), 277-285. https://doi.org/10.1016/j.ijrmhm.2007.06.003
Detailed Record
Leparoux, M.; Loher, M.; Schreuders, C.; Siegmann, S. Neural network modelling of the inductively coupled RF plasma synthesis of silicon nanoparticles. Powder Technol. 2008, 185 (2), 109-115. https://doi.org/10.1016/j.powtec.2007.10.004
Detailed Record
Leparoux, M.; Leconte, Y.; Swiderska-Sroda, A.; Gierlotka, S.; Le Gallet, S.; Bernard, F. Silicon carbide nanoparticles synthesis for the elaboration of nanostructured materials. Presented at the APNFM 2008, Dresden, Germany, January 23-25, 2008.
Detailed Record
Marot, G.; Démarécaux, P.; Lesage, J.; Hadad, M.; Siegmann, S.; Staia, M. H. The interfacial indentation test to determine adhesion and residual stresses in NiCr VPS coatings. Surf. Coat. Technol. 2008, 202 (18), 4411-4416. https://doi.org/10.1016/j.surfcoat.2008.04.018
Detailed Record
Nagata, K.; Hayashi, M.; Sato, M.; Ishizaki, K.; Hayashi, T.; Matsubara, A.; Takayama, S.; Motojima, O. CO2 saving process for steel making by microwave. In Proceedings ICS 2008: the 4th international congress on the science and technology of steelmaking, presented at the Proceedings ICS 2008: the 4th international congress on the science and technology of steelmaking, Gifu, Japan, October 6-8, 2008; Tekkō Kyōkai, N., Ed.; 2008; pp 638-641.
Detailed Record
Nicula, R.; Stir, M.; Ishizaki, K.; Catala-Civera, J. M.; Vaucher, S. Nanocrystallization of amorphous alloys using microwaves: in situ time-resolved synchrotron radiation studies. Presented at the 13th international conference on rapidly quenched & metastable materials RQ13, Dresden, Germany, August 24-29, 2008.
Detailed Record
Parlinska-Wojtan, M.; Wasmer, K.; Tharian, J.; Michler, J. Microstructural comparison of material damage in GaAs caused by Berkovich and wedge nanoindentation and nanoscratching. Scr. Mater. 2008, 59 (3), 364-367. https://doi.org/10.1016/j.scriptamat.2008.04.008
Detailed Record
Pittini, Y. Y.; Daneshvari, D.; Pittini, R.; Vaucher, S.; Rohr, L.; Leparoux, S.; Leuenberger, H. Cole-Cole plot analysis of dielectric behavior of monoalkyl ethers of polyethylene glycol (CnEm). Eur. Polym. J. 2008, 44 (4), 1191-1199. https://doi.org/10.1016/j.eurpolymj.2008.01.016
Detailed Record
Pittini, Y. Y.; Daneshvari, D.; Leparoux, S.; Vaucher, S.; Ritter, A.; Rohr, L.; Leuenberger, H. Effect of PEG number on dielectric properties of paraffin-based PEG polymers at microwave frequencies. COMPEL Int. J. Comput. Math. Electr. Electron. Eng. 2008, 27 (2), 500-508. https://doi.org/10.1108/03321640810847788
Detailed Record
Unifantowicz, P.; Vaucher, S.; Lewandowska, M.; Kurzydłowski, K. J. Structural changes of silicon upon high-energy milling investigated by Raman spectroscopy. J. Phys. Condens. Matter 2008, 20 (2), 025205 (5 pp.). https://doi.org/10.1088/0953-8984/20/02/025205
Detailed Record
Vaucher, S.; Kuebler, J.; Beffort, O.; Biasetto, L.; Zordan, F.; Colombo, P. Ceramic foam-reinforced Al-based micro-composites. Compos. Sci. Technol. 2008, 68 (15-16), 3202-3207. https://doi.org/10.1016/j.compscitech.2008.08.004
Detailed Record
Vaucher, S.; Nicula, R. Frontiers in microwave process monitoring. Chemistry Today, 2008, pp 38-39.
Detailed Record
Vaucher, S.; Nicula, R.; Català-Civera, J. M.; Schmitt, B.; Patterson, B. In situ synchrotron radiation monitoring of phase transitions during microwave heating of Al-Cu-Fe alloys. J. Mater. Res. 2008, 23 (1), 170-175. https://doi.org/10.1557/JMR.2008.0009
Detailed Record
Wasmer, K.; Ballif, C.; Pouvreau, C.; Schulz, D.; Michler, J. Dicing of gallium-arsenide high performance laser diodes for industrial applications. Part I. Scratching operation. J. Mater. Process. Technol. 2008, 198 (1-3), 114-121. https://doi.org/10.1016/j.jmatprotec.2007.06.055
Detailed Record
Wasmer, K.; Ballif, C.; Pouvreau, C.; Schulz, D.; Michler, J. Dicing of gallium-arsenide high performance laser diodes for industrial applications. Part II. Cleavage operation. J. Mater. Process. Technol. 2008, 198 (1-3), 105-113. https://doi.org/10.1016/j.jmatprotec.2007.06.054
Detailed Record
Wasmer, K.; Bidiville, A.; Michler, J.; Ballif, C.; van der Meer, M.; Nasch, P. Effect of strength test methods on silicon wafer strength measurements. In Proceedings of the 22nd European photovoltaic solar energy conference, presented at the 22nd European photovoltaic solar energy conference, Milan, Italy, September 3-7, 2007; 2008; pp 1135-1140.
Detailed Record
Wasmer, K.; Bidiville, A.; Jeanneret, F.; Michler, J.; Ballif, C.; Van der Meer, M.; Nasch, P. M. Effects of edge defects induced by multi-wire sawing on the wafer strength. In The compiled state-of-the-art of PV solar technology and deployment : 23rd European photovoltaic solar energy conference. - München : WIP renewable energies, 2008, presented at the 23rd European photovoltaic solar energy conference, Valencia, Spain, September 1-5, 2008; 2008; pp 1305-1310. https://doi.org/10.4229/23rdEUPVSEC2008-2CV.3.43
Detailed Record
Wasmer, K.; Wermelinger, T.; Bidiville, A.; Spolenak, R.; Michler, J. In situ compression tests on micron-sized silicon pillars by Raman microscopy—stress measurements and deformation analysis. J. Mater. Res. 2008, 23 (11), 3040-3047. https://doi.org/10.1557/JMR.2008.0363
Detailed Record
Yamada Pittini, Y.; Daneshvari, D.; Pittini, R.; Vaucher, S.; Leuenberger, H. Dielectric relaxation of monoalkyl ethers of polyethylene glycol at microwave frequencies. In Global congress on microwave energy applications GCMEA 2008 MAJIC 1st. Proceedings. "The new flame for humanity", presented at the Global congress on microwave energy applications GCMEA 2008 MAJIC 1st, Otsu, Japan, August 4-8, 2008; GCMEA; MAJIC: sine loco, 2008; pp 373-376.
Detailed Record
Battabyal, M.; Beffort, O.; Kleiner, S.; Vaucher, S.; Rohr, L. Heat transport across the metal-diamond interface. Presented at the Poster presented at the 8th European conference on diamond, diamond-like materials, carbon nanotubes, and nitrides, Berlin, Germany, September 9-14, 2007.
Detailed Record
Beffort, O.; Long, S.; Cayron, C.; Kuebler, J.; Buffat, P. A. Alloying effects on microstructure and mechanical properties of high volume fraction SiC-particle reinforced Al-MMCs made by squeeze casting infiltration. Compos. Sci. Technol. 2007, 67 (3-4), 737-745. https://doi.org/10.1016/j.compscitech.2006.04.005
Detailed Record
Bidiville, A.; Wasmer, K.; Michler, J.; Ballif, C.; Van der Meer, M.; Nasch, P. M. 2CV.3.19: Towards the correlation of mechanical properties and sawing parameters of silicon wafers. Presented at the Poster presented at the 22nd European Photovoltaic Solar Energy & Exhibition, Mailand, Italy, September 3-7, 2007.
Detailed Record
Bolot, R.; Coddet, C.; Schreuders, C.; Leparoux, M.; Siegmann, S. Modeling of an inductively coupled plasma for the synthesis of nanoparticles. In Thermal spray 2007: global coating solutions, proceedings from the international thermal spray conference, presented at the International thermal spray conference (ITSC 2007), Beijing, China, May 14-16, 2007; Marple, B. R., Hyland, M. M., Lau, Y. C., Li, C. J., Lima, R. S., Montavon, G., Eds.; ASM International: Materials Park, Ohio, USA, 2007; pp 179-184.
Detailed Record
Bolot, R.; Coddet, C.; Schreuders, C.; Leparoux, M.; Siegmann, S. Modeling of an inductively coupled plasma for the synthesis of nanoparticles. J. Therm. Spray Technol. 2007, 16 (5-6), 690-697. https://doi.org/10.1007/s11666-007-9078-8
Detailed Record
Duraiselvam, M.; Galun, R.; Siegmann, S.; Wesling, V.; Mordike, B. L. Investigation of hydroabrasive erosion of laser alloyed nickel and titanium based intermetallic matrix composites witg TiC reinforcement. Surf. Eng. 2007, 23 (6), 425-430. https://doi.org/10.1179/174329407X260609
Detailed Record
Duraiselvam, M.; Galun, R.; Siegmann, S.; Wesling, V.; Mordike, B. L. Study of liquid impact erosion in B2-NiTi and Ti3Al based intermetallic matrix composites on laser alloyed Ti-6Al-4V. Adv. Eng. Mater. 2007, 9 (3), 171-176. https://doi.org/10.1002/adem.200600227
Detailed Record
Gao, Z.; Long, S.; You, G.; Beffort, O. Observation of flow infiltration behavior of aluminum melt in SiC particles. Tezhong Zhuzao Ji Youse Hejin/Spec. Cast. and Nonferr. Alloys 2007, 27 (8), 627-630.
Detailed Record
Hadad, M.; Marot, G.; Démarécaux, P.; Chicot, D.; Lesage, J.; Rohr, L.; Siegmann, S. Adhesion tests for thermal spray coatings: correlation of bond strength and interfacial toughness. Surf. Eng. 2007, 23 (4), 279-283. https://doi.org/10.1179/174329407X215159
Detailed Record
Hadad, M.; Siegmann, S.; Rohr, L.; Hitzek, R.; Bürgler, P. Mechanical and tribological investigations of new and locally refurbished WC-Co-Cr coatings (patent pending). Presented at the Poster presented at the international thermal spray conference & exposition, ITSC 2007, Beijing, China, May 14-16, 2007.
Detailed Record
Hadad, M.; Siegmann, S.; Rohr, L.; Hitzek, R.; Buergler, P. Mechanische und tribologische Untersuchungen an neuen und lokal aufgearbeiteten WC-Co-Cr Beschichtungen. Presented at the Poster presented at the KTI / CTI medtech event 2007, Bern, Switzerland, September 4, 2007.
Detailed Record
Hadad, M.; Hitzek, R.; Buergler, P.; Rohr, L.; Siegmann, S. Wear performance of sandwich structured WC-Co-Cr thermally sprayed coatings using different intermediate layers. Wear 2007, 263 (1-6), 691-699. https://doi.org/10.1016/j.wear.2006.12.057
Detailed Record
Heiber, J.; Clemens, F.; Helbig, U.; de Meuron, A.; Soltmann, C.; Graule, T.; Hülsenberg, D. Properties of Pb(Zr, Ti)O3 fibres with a radial gradient structure. Acta Mater. 2007, 55 (19), 6499-6506. https://doi.org/10.1016/j.actamat.2007.08.004
Detailed Record
Jäggi, C.; Leparoux, M.; Siegmann, S. Thermally sprayed open porous titanium coatings: process stability and in-vivo response. Presented at the KTI/CTI medtech event, Bern, Switzerland, September 4, 2007.
Detailed Record
Leconte, Y.; Leparoux, M.; Portier, X.; Herlin-Boime, N.; Siegmann, S.; Rohr, L.; Reynaud, C. Structural study of SiC nanoparticles grown by inductively coupled plasma and laser pyrolysis for nanostructured ceramics elaboration. In Symposium JJ – structural and refractory materials for fusion and fission technologies, presented at the 2006 MRS fall meeting, Boston, Massachusetts, November 27–December 1, 2006; Aktaa, J., Samaras, M., Serrano de Caro, M., Victoria, M., Wirth, B., Eds.; Materials research society symposium proceedings; Materials Research Society: Warrendale, Pennsylvania, 2007; Vol. 981, pp 0981-JJ06-01 (6 pp.). https://doi.org/10.1557/PROC-981-0981-JJ06-01
Detailed Record
Leinenbach, C.; Al-Badri, A.; Roth, M.; Hadad, M.; Siegmann, S.; Scarlin, B.; Staubli, M.; Hitzek, R.; Bürgler, P.; Nicoli, A.; et al. Coatings for valves and blades in steam turbines. Presented at the Jahrestagung zum Energieforschungsprogramm Gas- und Dampfkraftwerke (Kraftwerk 2020), Ittigen, Switzerland, August 8, 2007.
Detailed Record
Leparoux, S.; Diot, C.; Dubach, A.; Vaucher, S. Synthesis of silicon carbide coating on diamond by microwave heating of diamond and silicon powder: a heteroepitaxial growth. Scr. Mater. 2007, 57 (7), 595-597. https://doi.org/10.1016/j.scriptamat.2007.06.016
Detailed Record
Michler, J.; Wasmer, K.; Meier, S.; Östlund, F.; Leifer, K. Plastic deformation of gallium arsenide micropillars under uniaxial compression at room temperature. Appl. Phys. Lett. 2007, 90 (4), 043123 (3 pp.). https://doi.org/10.1063/1.2432277
Detailed Record
Moser, B.; Wasmer, K.; Barbieri, L.; Michler, J. Strength and fracture of Si micropillars: a new scanning electron microscopy-based micro-compression test. J. Mater. Res. 2007, 22 (4), 1004-1011. https://doi.org/10.1557/JMR.2007.0140
Detailed Record
Nelis, T.; Aeberhard, M.; Rohr, L.; Michler, J.; Belenguer, P.; Guillot, P.; Thérèse, L. A simple method for measuring plasma power in rf-GDOES instruments. Anal. Bioanal. Chem. 2007, 389 (3), 763-767. https://doi.org/10.1007/s00216-007-1509-3
Detailed Record
Pittini, Y. Y.; Daneshvari, D.; Leparoux, S.; Vaucher, S.; Ritter, A.; Rohr, L.; Leuenberger, H. Effect of PEG Number on dielectric properties of paraffin base-PEG polymers at microwave frequencies. In Induction, dielectric, conduction and electromagnetic processing: international symposium on heating by electromagnetic sources, presented at the International symposium on heating by electromagnetic sources, Padua, Italy, June 20-22, 2007; SGEditoriali: Padova, 2007; p (8 pp.).
Detailed Record
Schmid, H.; Leparoux, M.; Schreuders, C.; Dvorak, M. Nano-particle characterization by means of SEM and quantitative image analysis. Presented at the POWTECH with PARTEC congress, 2007, Nürnberg, Germany, March 27-29, 2007.
Detailed Record
Siegmann, S.; Kern, P.; Rohr, L.; Bandyopadhyay, P. P. Tribological and corrosion behavior of vacuum plasma sprayed Ti-Zr-Ni quasicrystalline coatings. J. Therm. Spray Technol. 2007, 16 (5-6), 947-953. https://doi.org/10.1007/s11666-007-9117-5
Detailed Record
Siegmann, S.; Kern, P.; Rohr, L.; Bandyopadhyay, P. P. Tribological and corrosion behavior of vacuum plasma sprayed Ti-Zr-Ni quasicrystalline coatings. In Thermal spray 2007: global coating solutions, proceedings from the international thermal spray conference, presented at the International thermal spray conference (ITSC 2007), Beijing, China, May 14-16, 2007; Marple, B. R., Hyland, M. M., Lau, Y. C., Li, C. J., Lima, R. S., Montavon, G., Eds.; ASM International: Materials Park, Ohio, USA, 2007; pp 931-936.
Detailed Record
Thènemann, M.; Beffort, O.; Kleiner, S.; Vogt, U. Aluminum matrix composites based on preceramic-polymer-bonded SiC preforms. Compos. Sci. Technol. 2007, 67 (11-12), 2377-2383. https://doi.org/10.1016/j.compscitech.2007.01.001
Detailed Record
Vaucher, S.; Unifantowicz, P.; Ricard, C.; Dubois, L.; Kuball, M.; Catala-Civera, J. M.; Bernard, D.; Stampanoni, M.; Nicula, R. On-line tools for microscopic and macroscopic monitoring of microwave processing. Physica B 2007, 398 (2), 191-195. https://doi.org/10.1016/j.physb.2007.04.064
Detailed Record
Wasmer, K.; Bidiville, A.; Michler, J.; Ballif, C.; Van der Meer, M.; Nasch, P. 2CV.3.20: effect of strength test methods on silicon wafer strength measurements. Presented at the 22nd European photovoltaic solar energy & exhibition, Mailand, Italy, September 3-7, 2007.
Detailed Record
Wasmer, K.; Moser, B.; Pouvreau, C.; Michler, J. An overview of nanomaterial testing using in-situ nanoindenter. In Fine structure of papermaking fibres - the final report of COST Action E54 2011, presented at the COST Action E54, Riga, Latvia, April 25-27, 2007; Ander, P., Bauer, W., Heinemann, S., Kallio, P., Passas, R., Treimanis, A., Eds.; 2007; pp 44-47.
Detailed Record
Wasmer, K.; Parlinska-Wojtan, M.; Gassilloud, R.; Pouvreau, C.; Tharian, J.; Micher, J. Plastic deformation modes of gallium arsenide in nanoindentation and nanoscratching. Appl. Phys. Lett. 2007, 90 (3), 031902 (3 pp.). https://doi.org/10.1063/1.2431763
Detailed Record
Beffort, O.; Khalid, F. A.; Weber, L.; Ruch, P.; Klotz, U. E.; Meier, S.; Kleiner, S. Interface formation in infiltrated Al(Si)/diamond composites. Diam. Relat. Mater. 2006, 15 (9), 1250-1260. https://doi.org/10.1016/j.diamond.2005.09.036
Detailed Record
Duraiselvam, M.; Galun, R.; Siegmann, S.; Wesling, V.; Mordike, B. L. Liquid impact erosion characteristics of martensitic stainless steel laser clad with Ni-based intermetallic composites and matrix composites. Wear 2006, 261 (10), 1140-1149. https://doi.org/10.1016/j.wear.2006.03.024
Detailed Record
Hadad, M.; Blugan, G.; Kübler, J.; Rosset, E.; Rohr, L.; Michler, J. Tribological behaviour Of Si3N4 and Si3N4-%TiN based composites and multi-layer laminates. Wear 2006, 260 (6), 634-641. https://doi.org/10.1016/j.wear.2005.03.027
Detailed Record
Herzog, A.; Vogt, U. F.; Siegmann, S.; Beffort, O. Aluminium metal matrix composites based on biomorphic silicon carbide. Adv. Eng. Mater. 2006, 8 (10), 980-983. https://doi.org/10.1002/adem.200600121
Detailed Record
Jaeggi, C.; Kern, P.; Michler, J.; Patscheider, J.; Tharian, J.; Munnik, F. Film formation and characterization of anodic oxides on titanium for biomedical applications. Surf. Interface Anal. 2006, 38 (4), 182-185. https://doi.org/10.1002/sia.2261
Detailed Record
Jäggi, C. Electrochemical formation and local modification of titanium oxide films. Doctoral dissertation, Universität Bern, Switzerland, 2006, 146 p.
Detailed Record
Kaufmann, H.; Kleiner, S. Squeeze casting, thixocasting and rheocasting. In Magnesium technology. Metallurgy, Design Data, Applications.; Friedrich, H. E., Mordike, B. L., Eds.; Springer: Berlin, 2006; pp 258-268. https://doi.org/10.1007/3-540-30812-1
Detailed Record
Kern, P.; Jäggi, C.; Utke, I.; Friedli, V.; Michler, J. Local electron beam induced reduction and crystallization of amorphous titania films. Appl. Phys. Lett. 2006, 89 (2), 021902 (3 pp.). https://doi.org/10.1063/1.2219398
Detailed Record
Kleiner, S.; Khalid, F. A.; Ruch, P. W.; Meier, S.; Beffort, O. Effect of diamond crystallographic orientation on dissolution and carbide formation in contact with liquid aluminium. Scr. Mater. 2006, 55 (4), 291-294. https://doi.org/10.1016/j.scriptamat.2006.05.003
Detailed Record
Leinenbach, C.; Eifler, D. Fatigue and cyclic deformation behaviour of surface-modified titanium alloys in simulated physiological media. Biomaterials 2006, 27 (8), 1200-1208. https://doi.org/10.1016/j.biomaterials.2005.08.012
Detailed Record
Marot, G.; Lesage, J.; Démarécaux, P.; Hadad, M.; Siegmann, S.; Staia, M. H. Interfacial indentation and shear tests to determine the adhesion of thermal spray coatings. Surf. Coat. Technol. 2006, 201 (5), 2080-2085. https://doi.org/10.1016/j.surfcoat.2006.04.046
Detailed Record
Nelis, T.; Aeberhard, M.; Hohl, M.; Rohr, L.; Michler, J. Characterisation of a pulsed rf-glow discharge in view of its use in OES. J. Anal. At. Spectrom. 2006, 21 (2), 112-125. https://doi.org/10.1039/b513279g
Detailed Record
Pouvreau, C.; Wasmer, K.; Giovanola, J.; Michler, J.; Breguet, J. M.; Karimi, A. In-situ scanning electron microscope indentation of gallium arsenide. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, 2006; pp 61-62. https://doi.org/10.1007/1-4020-4972-2_29
Detailed Record
Ricard, C.; Dubois, L.; Vaucher, S.; Leparoux, S.; Camart, J. C.; Pribetich, J. Feasibility of contact-less temperature control by microwave radiometry during sintering of powdered SiC and Al/SiC samples. Microw. Opt. Technol. Lett. 2006, 48 (10), 2037-2041. https://doi.org/10.1002/mop.21856
Detailed Record
Rohr, L.; Michler, J. In situ observation of deformation modes and quantitative assessment of micro/nano mechanical properties. In Mechanics and materials in design, presented at the 5th international conference on mechanics and materials in design, Porto, Portugal, July 24-26, 2006; Silva Gomes, J. F., Meguid, S. A., Eds.; 2006; pp 451-452.
Detailed Record
Ruch, P. W.; Beffort, O.; Kleiner, S.; Weber, L.; Uggowitzer, P. J. Selective interfacial bonding in Al(Si)-diamond composites and its effect on thermal conductivity. Compos. Sci. Technol. 2006, 66 (15), 2677-2685. https://doi.org/10.1016/j.compscitech.2006.03.016
Detailed Record
Schneider, K. E.; Belashchenko, V.; Dratwinski, M.; Siegmann, S.; Zagorski, A. Thermal spraying for power generation components; Wiley: Weinheim, 2006; 285 p. https://www.wiley.com/en-us/Thermal+Spraying+for+Power+Generation+Components-p-9783527313372
Detailed Record
Schneider, K. E.; Belashchenko, V.; Dratwinski, M.; Siegmann, S.; Zagorski, A. Thermal spraying for power generation components; WILEY-VCH Verlag: Weinheim, 2006; 271 p.
Detailed Record
Schreuders, C. Synthèse par plasma inductif de particules nanométriques de silicium. Optimisation de la trempe. Doctoral dissertation, Université de Limoges, Limoges, France, 2006, 158 p.
Detailed Record
Shin, J. W. Process monitoring of alumina nanoparticle synthesis by inductively coupled RF thermal plasma. Doctoral dissertation, EPF Lausanne, Switzerland, 2006, 104 p. https://doi.org/10.5075/epfl-thesis-3564
Detailed Record
Shin, J. W.; Miyazoe, H.; Leparoux, M.; Siegmann, S.; Dorier, J. L.; Hollenstein, C. The influence of process parameters on precursor evaporation for alumina nanopowder synthesis in an inductively coupled rf thermal plasma. Plasma Sources Sci. Technol. 2006, 15 (3), 441-449. https://doi.org/10.1088/0963-0252/15/3/020
Detailed Record
Utke, I.; Friedli, V.; Fahlbusch, S.; Hoffmann, S.; Hoffmann, P.; Michler, J. Tensile strengths of metal-containing joints fabricated by focused electron beam induced deposition. Adv. Eng. Mater. 2006, 8 (3), 155-157. https://doi.org/10.1002/adem.200500254
Detailed Record
Vaucher, S.; Catala-Civera, J. M.; Sarua, A.; Pomeroy, J.; Kuball, M. Phase selectivity of microwave heating evidenced by Raman spectroscopy. J. Appl. Phys. 2006, 99 (11), 113505 (5 pp.). https://doi.org/10.1063/1.2198931
Detailed Record
Wasmer, K. Analysis of creep crack initiation and growth in laboratory specimens. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, 2006; pp 479-480. https://doi.org/10.1007/1-4020-4972-2_237
Detailed Record
Wasmer, K. Analysis of creep crack initiation and growth in laboratory specimens. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, Netherlands, 2006; p (10 pp.).
Detailed Record
Wasmer, K.; Nikbin, K. M.; Webster, G. A. Influence of material properties variations on creep crack growth predictions using Monte Carlo Simulations. In ESIA8: Throughlife management of structures and components, presented at the 8th international conference on engineering structural integrity assessment, throughlife management of structures and components, Manchester, UK, October 24-25, 2006; Edwards, J. H., Flewitt, P. E. J., Heyes, P. F., Knott, J. F., Sharples, J. K., Sherry, A., Smith, R. A., Tomkins, B., Turnbull, A., Eds.; FESI publishing: sine loco, 2006; p (20 pp.).
Detailed Record
Wasmer, K.; Nikbin, K. M.; Webster, G. A. Prediction of scatter in creep crack growth data from creep failure strain properties. J. ASTM Int. 2006, 3 (2), JAI13227 (13 pp.). https://doi.org/10.1520/STP45507S
Detailed Record
Wasmer, K.; Pouvreau, C.; Giovanola, J.; Michler, J. Scratching and brittle fracture of semiconductor in-situ scanning electron microscope. In Fracture of nano and engineering materials and structures. Proceedings of the 16th European conference of fracture, presented at the 16th European conference of fracture, Alexandroupolis, Greece, July 3-7, 2006; Gdoutos, E. E., Ed.; Springer: Dordrecht, Netherlands, 2006; pp 117-118. https://doi.org/10.1007/1-4020-4972-2_56
Detailed Record

Publications 2019

Cui, D.; Mohanta, A.; Leparoux, M.; Hoffmann, P.; Favre, S.; Tortorici, P. Quest project. Direct 3D printing of dissimilar materials. Presented at the Medtronic science & technology conference, Minneapolis, USA, October 1-3, 2019.
Detailed Record
Czaderski, C.; Shahverdi, M.; Ghafoori, E.; Motavalli, M.; Leinenbach, C.; Arabi-Hashemi, A.; Michels, J.; Scherer, J. The development of memory steel at Empa. In Proceedings of SMAR 2019, fifth conference on smart monitoring, assessment and rehabilitation of civil structures, presented at the SMAR 2019 - 5th conference on smart monitoring, assessment and rehabilitation of civil structures, Potsdam, Germany, August 27-29, 2019; SMAR proceedings; 2019; p (8 pp.).
Detailed Record
De Luca, A.; Seidman, D. N.; Dunand, D. C. Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys. Acta Mater. 2019, 165, 1-14. https://doi.org/10.1016/j.actamat.2018.11.031
Detailed Record
Ivas, T.; Balaban, M.; Dosen, V.; Miyawaki, J.; Ito, K.; Vrankovic, D.; Ostojic, G.; Zeljkovic, S. Optimization of the calcination temperature for the solvent-deficient synthesis of nanocrystalline gamma-alumina. Chem. Pap. 2019, 73 (4), 901-907. https://doi.org/10.1007/s11696-018-0637-x
Detailed Record
Kalentics, N.; Sohrabi, N.; Tabasi, H. G.; Griffiths, S.; Jhabvala, J.; Leinenbach, C.; Burn, A.; Logé, R. E. Healing cracks in selective laser melting by 3D laser shock peening. Addit. Manuf. 2019, 30, 100881 (10 pp.). https://doi.org/10.1016/j.addma.2019.100881
Detailed Record
Kato, K.; Vaucher, S.; Hoffmann, P.; Xin, Y.; Shirai, T. A novel single-mode microwave assisted synthesis of metal oxide as visible-light photocatalyst. Mater. Lett. 2019, 235 (000448000700031), 125-128. https://doi.org/10.1016/j.matlet.2018.09.132
Detailed Record
Korakas, N.; Violakis, G.; Mader, A.; Pissadakis, S. Azimuthal alignment method for optimizing Bragg grating inscription in photonic crystal fibers. IEEE Photonics Technol. Lett. 2019, 31 (11), 857-860. https://doi.org/10.1109/LPT.2019.2910461
Detailed Record
Lanfant, B.; Bär, F.; Mohanta, A.; Leparoux, M. Fabrication of metal matrix composite by laser metal deposition—a new process approach by direct dry injection of nanopowders. Materials 2019, 12 (21), 3584 (16 pp.). https://doi.org/10.3390/ma12213584
Detailed Record
Lanfant, B.; Leconte, Y.; Debski, N.; Bonnefont, G.; Pinault, M.; Mayne-L′Hermite, M.; Habert, A.; Jorand, Y.; Garnier, V.; Fantozzi, G.; et al. Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites. Ceram. Int. 2019, 45 (2), 2566-2575. https://doi.org/10.1016/j.ceramint.2018.10.187
Detailed Record
Liashenko, O.; Derevianko, S.; Morozovych, V.; Bouvard, D.; Lyashenko, Y. The solid state reactions in powder soldering mixtures of Cu-Sn system. Presented at the Poudres'2019: matériaux frittés et fabrication additive, Grenoble, May 22-24, 2019.
Detailed Record
Lyashenko, Y. O.; Liashenko, O. Y.; Morozovich, V. V. New approach to effective diffusion coefficient evaluation in the nanostructured two-phase media. Appl. Nanosci. 2019, 9 (5), 1025-1036. https://doi.org/10.1007/s13204-018-0731-y
Detailed Record
Michi, R. A.; De Luca, A.; Seidman, D. N.; Dunand, D. C. Effects of Si and Fe micro-additions on the aging response of a dilute Al-0.08Zr-0.08Hf-0.045Er at.% alloy. Mater. Charact. 2019, 147, 72-83. https://doi.org/10.1016/j.matchar.2018.10.016
Detailed Record
Mohanta, A.; Simmons, J. G.; Shen, G.; Kim, S. M.; Kung, P.; Everitt, H. O. Al doping in ZnO nanowires enhances ultraviolet emission and suppresses broad defect emission. J. Lumin. 2019, 211, 264-270. https://doi.org/10.1016/j.jlumin.2019.03.049
Detailed Record
Mohanta, A.; Lanfant, B.; Leparoux, M. Induction plasma synthesis of graphene nano-flakes with in situ investigation of Ar–H2–CH4 plasma by optical emission spectroscopy. Plasma Chem. Plasma Process. 2019, 39 (5), 1161-1179. https://doi.org/10.1007/s11090-019-09997-2
Detailed Record
Mohanta, A.; Leparoux, M. Spectroscopic investigation of laser produced plasma of carbon nanotube reinforced AlMg5 metal matrix nanocomposites. Opt. Lasers Eng. 2019, 121, 37-45. https://doi.org/10.1016/j.optlaseng.2019.03.007
Detailed Record
Muster, M.; Hameed, A.; Wood, D.; Appleby-Thomas, G.; Wasmer, K. Damping of post-impact vibrations. Appl. Acoust. 2019, 156, 427-433. https://doi.org/10.1016/j.apacoust.2019.07.040
Detailed Record
Muster, M.; Hameed, A.; Wood, D.; Wasmer, K. Push-out force and impulse measurement of seven types of small arms ammunition with three different surface states. AIP Adv. 2019, 9 (11), 115016 (9 pp.). https://doi.org/10.1063/1.5128440
Detailed Record
Nguendon Kenhagho, H.; Shevchik, S.; Saeidi, F.; Faivre, N.; Meylan, B.; Rauter, G.; Guzman, R.; Cattin, P.; Wasmer, K.; Zam, A. Characterization of ablated bone and muscle for long-pulsed laser ablation in dry and wet conditions. Materials 2019, 12 (8), 1338 (16 pp.). https://doi.org/10.3390/ma12081338
Detailed Record
Rowthu, S.; Hoffmann, P. Versatile micro- and nanotexturing techniques for antibacterial applications. In Functional nanostructured interfaces for environmental and biomedical applications; Dinca, V., Suchea, M. P., Eds.; Micro and nano technologies; Elsevier: Amsterdam, 2019; pp 27-62. https://doi.org/10.1016/B978-0-12-814401-5.00003-7
Detailed Record
Schuster, M.; Grolimund, D.; Sanchez, D.; Zweiacker, K.; Griffiths, S.; De Luca, A.; Leinenbach, C. Computer-assisted screening of aluminum alloys for rapid solidification applications. Presented at the AAMS2019, Gothenburg, Sweden, September 18-20, 2019.
Detailed Record
Shevchik, S. A.; Meylan, B.; Violakis, G.; Wasmer, K. 3D reconstruction of cracks propagation in mechanical workpieces analyzing non-stationary acoustic mixtures. Mech. Syst. Signal Process. 2019, 119, 55-64. https://doi.org/10.1016/j.ymssp.2018.09.022
Detailed Record
Shevchik, S. A.; Masinelli, G.; Kenel, C.; Leinenbach, C.; Wasmer, K. Deep learning for in situ and real-time quality monitoring in additive manufacturing using acoustic emission. IEEE Trans. Ind. Inform. 2019, 15 (9), 5194-5203. https://doi.org/10.1109/TII.2019.2910524
Detailed Record
Shevchik, S. A.; Le-Quang, T.; Farahani, F. V.; Faivre, N.; Meylan, B.; Zanoli, S.; Wasmer, K. Laser welding quality monitoring via graph support vector machine with data adaptive kernel. IEEE Access 2019, 7, 93108-93122. https://doi.org/10.1109/ACCESS.2019.2927661
Detailed Record
Trabadelo, V.; Pathak, S.; Saeidi, F.; Parlinska-Wojtan, M.; Wasmer, K. Nanoindentation deformation and cracking in sapphire. Ceram. Int. 2019, 45 (8), 9835-9845. https://doi.org/10.1016/j.ceramint.2019.02.022
Detailed Record
Wang, T.; Zhang, J.; Lee, W.; Ivas, T.; Leinenbach, C. Numerical analysis on the residual stress distribution and its influence factor analysis for Si3N4/42CrMo brazed joint. Simul. Model. Pract. Theory 2019, 95, 49-59. https://doi.org/10.1016/j.simpat.2019.04.007
Detailed Record
Wasmer, K.; Le-Quang, T.; Meylan, B.; Shevchik, S. A. In situ quality monitoring in AM using acoustic emission: a reinforcement learning approach. J. Mater. Eng. Perform. 2019, 28 (2), 666-672. https://doi.org/10.1007/s11665-018-3690-2
Detailed Record
Wasmer, K.; Le-Quang, T.; Shevchik, S. A.; Violakis, G. Piezo acoustic versus opto-acoustic sensors in laser processing. In NDT.net, presented at the 22. Kolloquium Schallemission und 3. Anwenderseminar Zustandsüberwachung mit geführten Wellen (DGZfP AE-2019), Karlsruhe, Germany, March 27-28, 2019; 2019; p (8 pp.). http://www.ndt.net/?id=24449
Detailed Record
Wróbel, R.; Griffiths, S.; Leinenbach, C. Influence of processing parameters on microstructure and crack formation during selective laser melting of a L12 -strengthened Ni superalloy. Presented at the AAMS2019, Gothenburg, Sweden, September 18-20, 2019.
Detailed Record
Yang, Y.; Arabi-Hashemi, A.; Leinenbach, C.; Shahverdi, M. Improvement of FeMnSi based shape memory alloys yield stress by heat treatment. In Proceedings of SMAR 2019, fifth conference on smart monitoring, assessment and rehabilitation of civil structures, presented at the SMAR 2019 - 5th conference on smart monitoring, assessment and rehabilitation of civil structures, Potsdam, Germany, August 27-29, 2019; SMAR proceedings; 2019; p (7 pp.).
Detailed Record
Zeljković, S.; Ivas, T.; Maruyama, H.; Nino, J. C. Structural, magnetic and optical properties of BiFeO3 synthesized by the solvent-deficient method. Ceram. Int. 2019, 45 (16), 19793-19798. https://doi.org/10.1016/j.ceramint.2019.06.234
Detailed Record

Publications 2018

Anis, A. L.; Talari, M. K.; Kishore Babu, N.; Ismail, M. H.; Janaki Ram, G. D.; Mohd Arif, I. A. Grain refinement of Ti-15V-3Cr-3Sn-3Al metastable β titanium alloy welds using boron-modified fillers. J. Alloys Compd. 2018, 749, 320-328. https://doi.org/10.1016/j.jallcom.2018.03.286
Detailed Record
Arabi-Hashemi, A.; Lee, W. J.; Leinenbach, C. Recovery stress formation in FeMnSi based shape memory alloys: impact of precipitates, texture and grain size. Mater. Des. 2018, 139, 258-268. https://doi.org/10.1016/j.matdes.2017.11.006
Detailed Record
Arabi-Hashemi, A.; Guo, Y.; Michler, J.; Casari, D.; Leinenbach, C.; Maeder, X. Stress induced martensite variants revealed by in situ high resolution electron backscatter diffraction (HR-EBSD). Mater. Des. 2018, 151, 83-88. https://doi.org/10.1016/j.matdes.2018.04.006
Detailed Record
Arnold, K.; Tatlock, G.; Kenel, C.; Colella, A.; Matteazzi, P. High temperature isothermal oxidation behaviour of an oxide dispersion strengthened derivative of IN625. Mater. High Temp. 2018, 35 (1-3), 141-150. https://doi.org/10.1080/09603409.2017.1393145
Detailed Record
Crisan, A. D.; Vasiliu, F.; Nicula, R.; Bartha, C.; Mercioniu, I.; Crisan, O. Thermodynamic, structural and magnetic studies of phase transformations in MnAl nanocomposite alloys. Mater. Charact. 2018, 140, 1-8. https://doi.org/10.1016/j.matchar.2018.03.034
Detailed Record
Croteau, J. R.; Griffiths, S.; Rossell, M. D.; Leinenbach, C.; Kenel, C.; Jansen, V.; Seidman, D. N.; Dunand, D. C.; Vo, N. Q. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting. Acta Mater. 2018, 153, 35-44. https://doi.org/10.1016/j.actamat.2018.04.053
Detailed Record
Gong, J.; Violakis, G.; Infante, D.; Hoffmann, P.; Kostro, A.; Schüler, A. Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation. In Laser-based micro- and nanoprocessing XII, presented at the SPIE Lase, San Francisco, California, January 27-February 1, 2018; Klotzbach, U., Washio, K., Kling, R., Eds.; Proceedings of SPIE; SPIE: Bellingham, Washington, 2018; Vol. 10520, p 105200Z (8 pp.). https://doi.org/10.1117/12.2286908
Detailed Record
Griffiths, S.; Rossell, M. D.; Croteau, J.; Vo, N. Q.; Dunand, D. C.; Leinenbach, C. Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy. Mater. Charact. 2018, 143, 34-42. https://doi.org/10.1016/j.matchar.2018.03.033
Detailed Record
Hammoud, H.; Valdivieso, F.; Vaucher, S. Multiphysics modelling approach to microwave heating of cerium oxide particles in diverse packing situations. IET Sci. Meas. Technol. 2018, 12 (7), 838-843. https://doi.org/10.1049/iet-smt.2017.0577
Detailed Record
Hosseini, E.; Ghafoori, E.; Leinenbach, C.; Motavalli, M.; Holdsworth, S. R. Stress recovery and cyclic behaviour of an Fe–Mn–Si shape memory alloy after multiple thermal activation. Smart Mater. Struct. 2018, 27 (2), 025009 (10 pp.). https://doi.org/10.1088/1361-665X/aaa2c9
Detailed Record
Kwon, H.; Park, J.; Kim, K.; Leparoux, M.; Silvain, J. F.; Kawasaki, A. Control of mechanical properties of functionally graded dual-nanoparticle-reinforced composites. In THERMEC 2018. 10th international conference on processing and manufacturing of advanced materials, presented at the THERMEC 2018. 10th international conference on processing and manufacturing of advanced materials, Paris, France, July 9-13, 2018; Shabadi, R., Ionescu, M., Jeandin, M., Richard, C., Chandra, T., Eds.; Materials science forum; Trans Tech Publications: Zurich, 2018; Vol. 941, pp 2037-2040. https://doi.org/10.4028/www.scientific.net/MSF.941.2037
Detailed Record
Le Dantec, M.; Abdulstaar, M.; Leistner, M.; Leparoux, M.; Hoffmann, P. Additive manufacturing of semiconductor silicon on silicon using direct laser melting. In Industrializing additive manufacturing - proceedings of additive manufacturing in products and applications - AMPA2017, presented at the International conference on additive manufacturing in products and applications (AMPA), Zürich, Switzerland, September 13-15, 2017; Meboldt, M., Klahn, C., Eds.; Springer: Cham, Switzerland, 2018; pp 104-116. https://doi.org/10.1007/978-3-319-66866-6_10
Detailed Record
Le-Quang, T.; Shevchik, S. A.; Meylan, B.; Vakili-Farahani, F.; Olbinado, M. P.; Rack, A.; Wasmer, K. Why is in situ quality control of laser keyhole welding a real challenge? In 10th CIRP conference on photonic technologies [LANE 2018], presented at the 10th CIRP conference on photonic technologies [LANE 2018], Fürth, Germany, September 03-06, 2018; Schmidt, M., Vollertsen, F., Dearden, G., Eds.; Procedia CIRP; Elsevier, 2018; Vol. 74, pp 649-653. https://doi.org/10.1016/j.procir.2018.08.055
Detailed Record
Leparoux, M.; Kollo, L.; Kwon, H.; Kallip, K.; Babu, N. K.; AlOgab, K.; Talari, M. K. Solid state processing of aluminum matrix composites reinforced with nanoparticulate materials. Adv. Eng. Mater. 2018, 20 (11), 1800401 (18 pp.). https://doi.org/10.1002/adem.201800401
Detailed Record
Li, X.; Ivas, T.; Spierings, A. B.; Wegener, K.; Leinenbach, C. Phase and microstructure formation in rapidly solidified Cu-Sn and Cu-Sn-Ti alloys. J. Alloys Compd. 2018, 735, 1374-1382. https://doi.org/10.1016/j.jallcom.2017.11.237
Detailed Record
Meylan, B.; Saeidi, F.; Wasmer, K. Effect of surface texturing on cast iron reciprocating against steel under cyclic loading in boundary and mixed lubrication conditions. Lubricants 2018, 6 (1), 2 (13 pp.). https://doi.org/10.3390/lubricants6010002
Detailed Record
Mohanta, A.; Jang, D. J.; Lu, S. K.; Ling, D. C.; Wang, J. S.; Chen, R. B.; Chuang, F. C. Carrier recombination dynamics in electronically coupled multi-layer InAs/GaAs quantum dots. J. Lumin. 2018, 195, 109-115. https://doi.org/10.1016/j.jlumin.2017.11.009
Detailed Record
Mohanta, A.; Lanfant, B.; Leparoux, M. Optical emission spectroscopy and imaging during synthesis of nanoparticles, laser welding and additive manufacturing. Presented at the Advanced manufacturing: a challenge for materials science, Dübendorf, Switzerland, October 22-24, 2018.
Detailed Record
Rowthu, S.; Saeidi, F.; Wasmer, K.; Hoffmann, P.; Kuebler, J. Flexural strength evaluations and fractography analyses of slip cast mesoporous submicron alumina. Ceram. Int. 2018, 44 (5), 5193-5201. https://doi.org/10.1016/j.ceramint.2017.12.125
Detailed Record
Rowthu, S.; Hoffmann, P. Perfluoropolyether-impregnated mesoporous alumina composites overcome the dewetting-tribological properties trade-off. ACS Appl. Mater. Interfaces 2018, 10 (12), 10560-10570. https://doi.org/10.1021/acsami.8b00061
Detailed Record
Shevchik, S.; Le, Q. T.; Meylan, B.; Wasmer, K. Acoustic Emission for in situ monitoring of laser processing. In Conference proceedings Ewgae 2018, presented at the 33rd European conference on acoustic emission testing (EWGAE), Senlis, France, September 12-14, 2018; CETIM: Senlis, 2018; p (9 pp.).
Detailed Record
Shevchik, S. A.; Meylan, B.; Mosaddeghi, A.; Wasmer, K. Acoustic emission for in situ monitoring of solid materials pre-weakening by electric discharge: a machine learning approach. IEEE Access 2018, 6, 40313-40324. https://doi.org/10.1109/ACCESS.2018.2853666
Detailed Record
Shevchik, S. A.; Kenel, C.; Leinenbach, C.; Wasmer, K. Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks. Addit. Manuf. 2018, 21, 598-604. https://doi.org/10.1016/j.addma.2017.11.012
Detailed Record
Tang, Y.; Li, X.; Martin, L. H. J.; Cuervo Reyes, E.; Ivas, T.; Leinenbach, C.; Anand, S.; Peters, M.; Snyder, G. J.; Battaglia, C. Impact of Ni content on the thermoelectric properties of half-Heusler TiNiSn. Energy Environ. Sci. 2018, 11 (2), 311-320. https://doi.org/10.1039/C7EE03062B
Detailed Record
Wasmer, K.; Kenel, C.; Leinenbach, C.; Shevchik, S. A. In situ and real-time monitoring of powder-bed AM by combining acoustic emission and artificial intelligence. In Industrializing additive manufacturing - proceedings of additive manufacturing in products and applications - AMPA2017, presented at the International conference on additive manufacturing in products and applications (AMPA), Zürich, Switzerland, September 13-15, 2017; Mebold, M., Klahn, C., Eds.; Springer: Cham, Switzerland, 2018; pp 200-209. https://doi.org/10.1007/978-3-319-66866-6_20
Detailed Record
Wasmer, K.; Le, T. Q.; Meylan, B.; Vakili-Farahani, F.; Leinenbach, C.; Olbinado, M. P.; Rack, A.; Shevchik, S. A. AM/LW process monitoring combining high-speed X-ray imaging, acoustic & optical sensors and artificial intelligence. Presented at the ESRF user meeting 2018, Grenoble, France, February 5-7, 2018.
Detailed Record
Wasmer, K. High-speed X-ray imaging for correlating acoustic signals with quality monitoring: a machine learning approach. In Contributed Papers from Materials Science & Technology 2018, presented at the Materials science & technology 2018 (MS&T18), Columbus, Ohio USA, October 14-18, 2018; 2018; pp 165-168.
Detailed Record
Wasmer, K.; Le-Quang, T.; Meylan, B.; Vakili-Farahani, F.; Olbinado, M. P.; Rack, A.; Shevchik, S. A. Laser processing quality monitoring by combining acoustic emission and machine learning: a high-speed X-ray imaging approach. In 10th CIRP conference on photonic technologies [LANE 2018], presented at the 10th CIRP conference on photonic technologies [LANE 2018], Fürth, Germany, September 03-06, 2018; Schmidt, M., Vollertsen, F., Dearden, G., Eds.; Procedia CIRP; Elsevier, 2018; Vol. 74, pp 654-658. https://doi.org/10.1016/j.procir.2018.08.054
Detailed Record
Wasmer, K.; Saeidi, F.; Meylan, B.; Le, Q. T.; Shevchik, S. A. When AE (acoustic emission) meets AI (artificial intelligence) II. In Conference proceedings Ewgae 2018, presented at the 33rd European conference on acoustic emission testing (EWGAE), Senlis, France, September 12-14, 2018; CETIM: Senlis, 2018; p (12 pp.).
Detailed Record
Zeljković, S.; Miyawaki, J.; Vranković, D.; Tervoort, E.; Hauert, R.; Kotegawa, T.; Ivas, T. Solvent-deficient synthesis of nanocrystalline Ba0.5Sr0.5Co0.8Fe0.2O3-δ powder. Process. Appl. Ceramics 2018, 12 (4), 342-349. https://doi.org/10.2298/PAC1804342Z
Detailed Record
Zhang, B.; Meylan, B.; Wasmer, K.; Cuche, E. A new ball-on-disk vacuum tribometer with in situ measurement of the wear track by digital holographic microscopy. In Proceedings of Asia international conference on tribology 2018, presented at the ASIATRIB 2018. The 6th Asia international conference on tribology, Sarawak, Malaysia, September 17-20, 2018; Abdollah, M. F. B., Ed.; Malaysian Tribology Society: Kuala Lumpur, 2018; pp 109-110.
Detailed Record