Hochleistungskeramik  
Ceramic-based Composites
Ceramic materials for energy technologies
Ceramic Microcomponents and Nanoceramics
Services
Education

 

 

 

 


 

Publications 2010

Bahraini, M./Schlenther, E./Kriegesmann, J./Graule, T. J./Kuebler, J. Influence of atmosphere and carbon contamination on activated pressureless infiltration of alumina-steel composites. Composites Part A: Applied Science and Manufacturing 2010, 41(10), 1511-1515.

Berutti, F. A./Alves, A. K./Clemens, F. J./Graule, T. J./Bergmann, C. P. Electrospinning and characterisation of ceria doped yttria fibres. Advances in Applied Ceramics 2010, 109(1), 62-64.

Bluhm, H./Guo, J./Braun, A./Heske, C. Soft X-ray spectroscopy in renewable energy generation and storage materials. Synchrotron Radiation News 2010, 23(1), 12-13.

Braun, A./Akurati, K. K./Fortunato, G./Reifler, F. A./Ritter, A./Harvey, A. S./Vital, A./Graule, T. J. Nitrogen doping of TiO2 photocatalyst forms a second eg state in the oxygen 1s NEXAFS pre-edge. Journal of Physical Chemistry C 2010, 114(1), 516-519.

Braun, A./Augustynski, J./Chandler, E. A./Mao, S. S./Miller, E. L./Turner, J. A./Ye, J. Introduction [to focus issue of Journal of Materials Research]: Photocatalysis for energy and environmental sustainability. Journal of Materials Research 2010, 25(1), 1-2, MRS

Braun, A./Mun, B. S./Sun, Y./Liu, Z./Gröning, O./Mäder, R./Erat, S./Zhang, X./Mao, S. S./Pomjakushina, E./Conder, K./Graule, T. J. Correlation of conductivity and angle integrated valence band photoemission characteristics in single crystal iron perovskites for 300 K < T < 800 K: Comparison of surface and bulk sensitive methods. Journal of Electron Spectroscopy and Related Phenomena 2010, 181(1), 56-62.

Braun, A./Seifert, S./Ilavsky, J. Highly porous activated glassy carbon film sandwich structure for electrochemical energy storage in ultracapacitor applications: study of the porous film structure and gradient. Journal of Materials Research 2010, 25(8), 1532-1540.

Braun, A./Wang, H./Funk, T./Seifert, S./Cairns, E. J. Depth profile analysis of a cycled lithium ion manganese oxide battery electrode via the valence state of manganese, with soft X-ray emission spectroscopy. Journal of Power Sources 2010, 195(22), 7644-7648.

Burnat, D./Ried, P./Holtappels, P./Heel, A./Graule, T. J./Kata, D. The rheology of stabilised lanthanum strontium cobaltite ferrite nanopowders in organic medium applicable as screen printed SOFC cathode layers. Fuel Cells 2010, 10(1), 156-165.

Castillo, N. C./Ding, L./Heel, A./Graule, T. J./Pulgarin, C. On the photocatalytic degradation of phenol and dichloroacetate by BiVO4: the need of a sacrificial electron acceptor. Journal of Photochemistry and Photobiology A 2010, 216(2-3), 221-227.

Castillo, N. C./Heel, A./Graule, T. J./Pulgarin, C. Flame-assisted synthesis of nanoscale, amorphous and crystalline, spherical BiVO4 with visible-light photocatalytic activity. Applied Catalysis B 2010, 95(3-4), 335-347.

Chen, Q./Braun, A./Ovalle, A./Savaniu, C. D./Graule, T. J./Bagdassarov, N. Hydrostatic pressure decreases the proton mobility in the hydrated BaZr0.9Y0.1O3 proton conductor. Applied Physics Letters 2010, 97(4), Article number 041902 (3 pp.).

de Hazan, Y./Wozniak, M./Heinecke, J./Müller, G./Graule, T. J. New microshaping concepts for ceramic/polymer nanocomposite and nanoceramic fibers. Journal of the American Ceramic Society 2010, 93(9), 2456-2459.

de Hazan, Y./Zimmermann, D./Z'graggen, M./Roos, S./Aneziris, C. G./Bollier, H./Fehr, P./Graule, T. J. Homogeneous electroless Ni-P/SiO2 nanocomposite coatings with improved wear resistance and modified wear behavior. Surface and Coatings Technology 2010, 204(21-22), 3464-3470.

Dittmer, R./Clemens, F./Schoenecker, A./Scheithauer, U./Ismael, M. R./Graule, T. J. Microstructural analysis and mechanical properties of Pb(Zr,Ti)O3 fibers derived by different processing routes. Journal of the American Ceramic Society 2010, 93(8), 2403-2410.

Erat, S. On the origin of enhanced conductivity in LaSrFe-oxide upon Ni doping: correlation of electronic structure and transport properties. Dissertation, ETHZ; Empa Dübendorf, Switzerland, 2010, 182 pp. /DISS /123

Erat, S./Wadati, H./Aksoy, F./Liu, Z./Graule, T. J./Gauckler, L. J./Braun, A. Iron-resonant valence band photoemission and oxygen near edge x-ray absorption fine structure study on La1-xSrxFe 0.75Ni0.25O3-&#948;. Applied Physics Letters 2010, 97(12), Article number 124101 (3 pp.).

Heel, A./Holtappels, P./Graule, T. J. On the synthesis and performance of flame-made nanoscale La0.6Sr0.4CoO3-&#948; and its influence on the application as an intermediate temperature solid oxide fuel cell cathode. Journal of Power Sources 2010, 195(19), 6709-6718.

Heel, A./Holtappels, P./Hug, P./Graule, T. J. Flame spray synthesis of nanoscale La0.6Sr0.4Co 0.2Fe0.8O3-&#948; and Ba0.5Sr0.5Co0.8Fe0.2O3-&#948; as cathode materials for intermediate temperature solid oxide fuel cells. Fuel Cells 2010, 10(3), 419-432.

Holzer, L./Flatt, R. J./Erdo&#287;an, S. T./Bullard, J. W./Garboczi, E. J. Shape comparison between 0.4-2.0 and 20-60 &#956;m cement particles. Journal of the American Ceramic Society 2010, 93(6), 1626-1633.

Holzer, L./Münch, B./Rizzi, M./Wepf, R./Marschall, P./Graule, T. J. 3D-microstructure analysis of hydrated bentonite with cryo-stabilized pore water. Applied Clay Science 2010, 47(3-4), 330-342.

Karageorgakis, N. I. Nanocrystalline ceramic thin films for micro-solid oxide fuel cells prepared by flame spray deposition. Dissertation, ETHZ; Empa Dübendorf, Switzerland, 2010, 139 pp. /DISS /123

Karageorgakis, N. I./Heel, A./Bieberle-Hütter, A./Rupp, J. L. M./Graule, T. J./Gauckler, L. J. Flame spray deposition of La0.6Sr0.4CoO3-&#948; thin films: microstructural characterization, electrochemical performance and degradation. Journal of Power Sources 2010, 195(24), 8152-8161.

Katsapov, G. Y./Braun, A. Deuterium tracer experiments prove the thiophenic hydrogen involvement during the initial step of thiophene hydrodesulfurization. Catalysis Letters 2010, 138(3-4), 224-230.

Keller, L. M./Götze, L. C./Rybacki, E./Dresen, G./Abart, R. Enhancement of solid-state reaction rates by non-hydrostatic stress effects on polycrystalline diffusion kinetics. American Mineralogist 2010, 95(10), 1399-1407.

Kozielski, L./Buixaderas, E./Clemens, F./Bujakiewicz-Koro&#324;ska, R. PZT Microfibre defect structure studied by Raman spectroscopy. Journal of Physics D 2010, 43(41), Article number 415401 (6 pp.).

Metin, H./Ari, M./Erat, S./Durmu&#351;, S./Bozoklu, M./Braun, A. The effect of annealing temperature on the structural, optical, and electrical properties of CdS films. Journal of Materials Research 2010, 25(1), 189-196.

Metin, H./Erat, S./Durmu&#351;, S./Ari, M. Annealing effect on CdS/SnO2 films grown by chemical bath deposition. Applied Surface Science 2010, 256(16), 5076-5081.

Metin, H./Erat, S./Emen, F. M./Kafadar, V./Yazici, A. N./Ari, M./Kulcu, N. The thermoluminescence properties of CdS films under nitrogen atmosphere. Journal of Luminescence 2010, 130(8), 1531-1538.

Michen, B./Graule, T. J. Isoelectric points of viruses. Journal of Applied Microbiology 2010, 109(2), 388-397.

Nakahara, S./Périgo, E. A./Pittini-Yamada, Y./de Hazan, Y./Graule, T. J. Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: identification of the oxide layer and its thickness control. Acta Materialia 2010, 58(17), 5695-5703.

Orlovskaya, N./Lukich, S./Subhash, G./Graule, T. J./Kuebler, J. Mechanical properties of 10 mol% Sc2O3-1 mol% CeO2-89 mol% ZrO2 ceramics. Journal of Power Sources 2010, 195(9), 2774-2781.

Pathak, S./Kuebler, J./Payzant, A./Orlovskaya, N. Mechanical behavior and electrical conductivity of La1-xCaxCoO3 (x = 0, 0.2, 0.4, 0.55) perovskites. Journal of Power Sources 2010, 195(11), 3612-3620.

Prestat, M./Morandi, A./Heel, A./Holzer, L./Holtappels, P./Graule, T. J. Effect of graphite pore former on oxygen electrodes prepared with La0.6Sr0.4CoO3-&#948; nanoparticles. Electrochemistry Communications 2010, 12(2), 292-295.

Radecka, M./Rekas, M./Kusior, E./Zakrzewska, K./Heel, A./Michalow, K. A./Graule, T. J. TiO2-based nanopowders and thin films for photocatalytical applications. Journal of Nanoscience and Nanotechnology 2010, 10(2), 1032-1042.

Reifler, F. A./Sánchez, F. A. L./Clemens, F. J./Varga, K./Hufenus, R. Flexible ceramic-reinforced polyurethane composite coatings on synthetic fibres: process of continuous liquid film coating and its influence on the coating thickness. Composites Science and Technology 2010, 70(8), 1207-1213.

Solarska, R./Alexander, B. D./Braun, A./Jurczakowski, R./Fortunato, G./Stiefel, M./Graule, T. J./Augustynski, J. Tailoring the morphology of WO3 films with substitutional cation doping: effect on the photoelectrochemical properties. Electrochimica Acta 2010, 55(26), 7780-7787.

Solarska, R./Heel, A./Ropka, J./Braun, A./Holzer, L./Ye, J./Graule, T. J. Nanoscale calcium bismuth mixed oxide with enhanced photocatalytic performance under visible light. Applied Catalysis A 2010, 382(2), 190-196.

Steinhausen, R./Kern, S./Pientschke, C./Beige, H./Clemens, F./Heiber, J. A new measurement method of piezoelectric properties of single ceramic fibres. Journal of the European Ceramic Society 2010, 30(2), 205-209.

Strehler, C./Blugan, G./Ehrle, B./Speisser, B./Graule, T. J./Kuebler, J. Influence of sintering and sintering additives on the mechanical and microstructural characteristics of Si3N4/SiC wood cutting tools. Journal of the European Ceramic Society 2010, 30(10), 2109-2115.

Van Garderen, N./Clemens, F. J./Scharf, D./Graule, T. J. Investigation of sintering temperature on attrition resistance of highly porous diatomite based material. 3rd International Conference on Porous Media and its Applications in Science, Engineering and Industry, Montecatini, Italy, 20-25 June 2009, 260-265.

Vasi&#263;, S./Grobéty, B./Kuebler, J./Graule, T. J./Baumgartner, L. XRCT characterisation of Ti particles inside porous Al2O3. Materials Characterization 2010, 61(6), 653-660.

Wang, C./de Jonge, N./Dunin-Borkowski, R. E./Braun, A./Guo, J./Winans, R. E./ Schober, H. In-situ and operando probing of energy materials at multiscale down to single atomic column: the power of X-rays, neutrons and electron microscopy: symposium held April 5-9, 2010, San Francisco, California. In: Anonymous Materials Research Society symposium proceedings, 1262, MRS, 2010, 153 pp.

Zhou, Y./Krumeich, F./Heel, A./Patzke, G. R. One-step hydrothermal coating approach to photocatalytically active oxide composites. Dalton Transactions 2010, 39(26), 6043-6048.

Zhou, Y./Vuille, K./Heel, A./Probst, B./Kontic, R./Patzke, G. R. An inorganic hydrothermal route to photocatalytically active bismuth vanadate. Applied Catalysis A 2010, 375(1), 140-148.

Publications 2009

Allen, A. J./Ilavsky, J./Braun, A. Multi-scale microstructure characterization of solid oxide fuel cell assemblies with ultra small-angle X-ray scattering. Advanced Engineering Materials 2009, 11(6), 495-501

Alves, A. K./Berutti, F. A./Clemens, F./Graule, T. J./Bergmann, C. P. Photocatalytic activity of titania fibers obtained by electrospinning. Materials Research Bulletin 2009, 44(2), 312-317

Alves, A. K./Berutti, F. A./Clemens, F./Graule, T./Bergmann, C. P. The effect of heat treatment temperature on CeO2 and Y2O3 doped CeO2 electrospun fibers. Reviews on Advanced Materials Science 2009, 21(2), 200-204

Bahraini, M./Minghetti, T./Zoellig, M./Schubert, J./Berroth, K./Schelle, C./Graule, T. J./Kuebler, J. Activated pressureless infiltration of metal-matrix composites with graded activator content. Composites Part A 2009, 40(10), 1566-1572

Bayraktar, D./Diethelm, S./Graule, T. J./Van Herle, J./Holtappels, P. Properties of B-site substituted La0.5Sr0.5FeO3-&#948; perovskites for application in oxygen separation membranes. Journal of Electroceramics 2009, 22(1-3), 55-60

Berutti, F. A./Alves, A. K./Bergmann, C. P./Clemens, F. J./Graule, T. Synthesis of CeO2 and Y2O3-doped CeO2 composite fibers by electrospinning. Particulate Science and Technology 2009, 27(3), 203-209

Blugan, G./Wittig, D./Kuebler, J. Oxidation and corrosion of silicon nitride ceramics with different sintering additives at 1200 and 1500 °C in air, water vapour, SO2 and HCl environments - a comparative study. Corrosion Science 2009, 51(3), 547-555

Braun, A. Comment on "Effects of native organic material and water on sorption properties of reference diesel soot". Environmental Science & Technology 2009, 43(13), 5158-5159

Braun, A. Two-process model for the atmospheric weathering, oxidation and ageing of diesel soot. Geophysical Research Letters 2009, 36, Article number L07810 (5 pp.)

Braun, A./Bayraktar, D./Erat, S./Harvey, A. S./Beckel, D./Purton, J. A./Holtappels, P./Gauckler, L. J./Graule, T. J. Pre-edges in oxygen (1s) x-ray absorption spectra: A spectral indicator for electron hole depletion and transport blocking in iron perovskites. Applied Physics Letters 2009, 94(20), Article number 202102 (3 pp.)

Braun, A./Duval, S./Ried, P./Embs, J./Juranyi, F./Strässle, T./Stimming, U./Hempelmann, R./Holtappels, P./Graule, T. J. Proton diffusivity in the BaZr0.9Y0.1O3&#8722;&#948; proton conductor. Journal of Applied Electrochemistry 2009, 39(4), 471-475

Braun, A./Kuba&#769;tova&#769;, A./Wirick, S./Mun, B. S. Radiation damage from EELS and NEXAFS in diesel soot and diesel soot extracts. Journal of Electron Spectroscopy and Related Phenomena 2009, 170(1-3), 42-48

Braun, A./Ovalle, A./Pomjakushin, V./Cervellino, A./Erat, S./Stolte, W. C./Graule, T. Yttrium and hydrogen superstructure and correlation of lattice expansion and proton conductivity in the BaZr0.9Y0.1O2.95 proton conductor. Applied Physics Letters 2009, 95(22), Article number 224103 (3 pp.)

Braun, A./Zhang, X./Sun, Y./Müller, U./Liu, Z./Erat, S./Ari, M./Grimmer, H./Mao, S. S./Graule, T. J. Correlation of high temperature x-ray photoemission valence band spectra and conductivity in strained LaSrFeNi oxide on SrTiO3 (110). Applied Physics Letters 2009, 95(2), Article number 022107 (3 pp.)

de Hazan, Y./Heinecke, J./Weber, A./Graule, T. J. High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants. Journal of colloid and Interface Science 2009, 337(1), 66-74

Diethelm, S./Bayraktar, D./Graule, T. J./Holtappels, P./Van Herle, J. Improved stability of La0.5Sr0.5FeO3 by Ta-doping for oxygen separation membrane application. Solid State Ionics 2009, 180(11-13), 857-860

Dusza, J./Blugan, G./Morgiel, J./Kuebler, J./Inam, F./Peijs, T./Reece, M. J./Puchy, V. Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. Journal of the European Ceramic Society 2009, 29(15), 3177-3184

Duval, S. B. C./Holtappels, P./Vogt, U. F./Stimming, U./Graule, T. J. Characterisation of BaZr0.9Y0.1O3&#8722;&#948; prepared by three different synthesis methods: study of the sinterability and the conductivity. Fuel Cells 2009, 9(5), 613-621

Erat, S./Braun, A./Ovalle, A./Piamonteze, C./Liu, Z./Graule, T./Gauckler, L. J. Correlation of O (1s) and Fe (2p) near edge x-ray absorption fine structure spectra and electrical conductivity of La1-xSrxFe 0.75 Ni0.25O3-&#948;. Applied Physics Letters 2009, 95(17), Article number 174108 (3 pp.)

Haas, O./Vogt, U. F./Soltmann, C./Braun, A./Yoon, W. S./Yang, X. Q./Graule, T. J. The Fe K-edge X-ray absorption characteristics of La1-xSrxFeO3-&#948; prepared by solid state reaction. Materials Research Bulletin 2009, 44(6), 1397-1404

Heel, A./Vital, A./Holtappels, P./Graule, T. J. Flame spray synthesis and characterisation of stabilised ZrO2 and CeO2 electrolyte nanopowders for SOFC applications at intermediate temperatures. Journal of Electroceramics 2009, 22(1-3), 40-46

Heiber, J./Belloli, A./Ermanni, P./Clemens, F. Ferroelectric characterization of single PZT fibers. Journal of Intelligent Material Systems and Structures 2009, 20(4), 379-385

Holzer, L./Münch, B. Toward reproducible three-dimensional microstructure analysis of granular materials and complex suspensions. Microscopy and Microanalysis 2009, 15(2), 130-146

Kubátová, A./Lahren, T. J./Beránek, J./Smoliakova, I. P./Braun, A./Huggins, F. Extractable organic carbon and its differentiation by polarity in diesel exhaust, wood smoke, and urban particulate matter. Aerosol Science and Technology 2009, 43(7), 714-729

Kuebler, J. Failure analysis on a flowmeter. Key Engineering Materials 2009, 409, 65-71

Manukyan, K. V./Kharatyan, S. L./Blugan, G./Kocher, P./Kuebler, J. MoSi2-Si3N4 composites: influence of starting materials and fabrication route on electrical and mechanical properties. Journal of the European Ceramic Society 2009, 29(10), 2053-2060

Michalow, K. A./Heel, A./Vital, A./Amberg, M./Fortunato, G./Kowalski, K./Graule, T. J./Rekas, M. Effect of thermal treatment on the photocatalytic activity in visible light of TiO2-W flame spray synthesised nanopowders. Topics in Catalysis 2009, 52(8), 1051-1059

Michalow, K. A./Logvinovich, D./Weidenkaff, A./Amberg, M./Fortunato, G./Heel, A./Graule, T. J./Rekas, M. Synthesis, characterization and electronic structure of nitrogen-doped TiO2 nanopowder. Catalysis Today 2009, 144(1-2), 7-12

Nurk, G./Kubacki, A./Holzer, L./Figi, R./Graule, T./Holtappels, P. Influence of some inorganic impurities on the electrochemical properties and microstructure of Ni-CGO anode in artificial woodgas atmosphere. Solid Oxide Fuel Cells - 11th International Symposium (SOFC-XI); 216th ECS Meeting Vienna, Austria, 4-9 October 2009, 2117-2124

Pathak, S./Steinmetz, D./Kuebler, J./Andrew Payzant, E./Orlovskaya, N. Mechanical behavior of La0.8Sr0.2Ga0.8Mg0.2O3 perovskites. Ceramics International 2009, 35(3), 1235-1241

Plesch, G./Gorbár, M./Vogt, U. F./Jesenák, K./Vargová, M. Reticulated macroporous ceramic foam supported TiO2 for photocatalytic applications. Materials Letters 2009, 63(3-4), 461-463

Richter, J./Holtappels, P./Graule, T. J./Nakamura, T./Gauckler, L. J. Materials design for perovskite SOFC cathodes. Monatshefte für Chemie 2009, 140(9), 985-999
Ari, M./Metin, H./Karaaslan, T./Erat, S. Electron-phonon interactions and electron mobility of HEMT at low electron temperatures. Optoelectronics and Advanced Materials-Rapid Communications 2009, 3(8), 771-775

Rojas Ismael, M./Clemens, F./Bohac, W. M./Graule, T. J./Hoffmann, M. J. Effects of rheology on the interface of Pb(Zr, Ti)O3 monofilament composites obtained by co-extrusion. Journal of the European Ceramic Society 2009, 29(14), 3015-3021

Rojas Ismael, M./Clemens, F./Wyss, P./Graule, T. J./Hoffmann, M. J. Processing, microstructure and electromechanical properties of Pb(Zr, Ti)O3 fibers obtained by thermoplastic co-extrusion. 18th IEEE International Symposium on Applications of Ferroelectrics (ISAF 2009), Xi'an, China, 23-27 August 2009, 109-112

Trenczek-Zajac, A./Radecka, M./Jasinski, M./Michalow, K. A./Rekas, M./Kusior, E./Zakrzewska, K./Heel, A./Graule, T./Kowalski, K. Influence of Cr on structural and optical properties of TiO2:Cr nanopowders prepared by flame spray synthesis. Journal of Power Sources 2009, 194(1), 104-111

Vasi&#263;, S./Grobéty, B./Kuebler, J./Graule, T. J. Activation mechanism and infiltration kinetic for pressureless melt infiltration of ti activated AI2O3 preforms by high melting alloy. Advanced Engineering Materials 2009, 11(8), 659-666

Wittig, D./Aneziris, C. G./Graule, T. J./Kuebler, J. Mechanical properties of three-dimensional interconnected alumina/steel metal matrix composites. Journal of Materials Science 2009, 44(2), 572-579

Wozniak, M./Graule, T. J./de Hazan, Y./Kata, D./Lis, J. Highly loaded UV curable nanosilica dispersions for rapid prototyping applications. Journal of the European Ceramic Society 2009, 29(11), 2259-2265

Publications 2008

Akurati, K. K./Vital, A./Dellemann, J. P./Michalow, K./Graule, T./Ferri, D./Baiker, A. Flame-made WO3/TiO2 nanoparticles: Relation between surface acidity, structure and photocatalytic activity. Applied Catalysis B: Environmental 2008, 79(1), 53-62.

Azad, A. K./Savaniu, C./Tao, S./Duval, S. B. C./Holtappels, P./Ibberson, R. M./Irvine, J. T. S. Structural origins of the differing grain conductivity values in BaZr 0.9Y0.1O2.95 and indication of novel approach to counter defect association. Journal of Materials Chemistry 2008, 18(29), 3414-3418.

Bayraktar, D. La0.5Sr0.5Fe1-yMy03-d (M = Ti, Ta) perovskite oxides for oxygen separation membranes. Dissertation, EPFL Lausanne, Faculté des sciences et techniques de l’ingénieur STI; Empa, Swiss Federal Laboratories for Material Testing and Research, Laboratory for High Performance Ceramics, Switzerland, 2008, 178 pp. /DISS /123

Belloli, A./Heiber, J./Clemens, F./Ermanni, P. Novel characterization procedure for single piezoelectric fibers. Journal of Intelligent Material Systems and Structures 2008, 5 pp.

Blugan, G./Wittig, D./Zinz, S./Graule, T./Kuebler, J. Oxidation and corrosion of silicon nitride at 1200°C and 1500°C. 5th China International Conference on High-Performance Ceramics, High Performance Ceramics V, Changsha, China, May 10-13, 2007, 885-887.

Braun, A./Huggins, F. E./Kubátová, A./Wirlck, S./Maricq, M. M./Mun, B. S./McDonald, I. D./Kelly, K. E./Shah, N./Huffman, G. P. Toward distinguishing woodsmoke and diesel exhaust in ambient participate matter. Environmental Science and Technology 2008, 42(2), 374-380.

Braun, A./Janousch, M./Sfeir, J./Kiviaho, J./Noponen, M./Huggins, F. E./Smith, M. J./Steinberger-Wilckens, R./Holtappels, P./Graule, T. Molecular speciation of sulfur in solid oxide fuel cell anodes with X-ray absorption spectroscopy. Journal of Power Sources 2008, 183(2), 564-570.

Bucher, E./Egger, A./Ried, P./Sitte, W./Holtappels, P. Oxygen nonstoichiometry and exchange kinetics of Ba0.5Sr0.5Co0.8Fe0.2O3 - d. Solid State Ionics 2008, 179(21-26), 1032-1035.

de Hazan, Y./Reuter, T./Werner, D./Clasen, R./Graule, T. Interactions and dispersion stability of aluminum oxide colloidal particles in electroless nickel solutions in the presence of comb polyelectrolytes. Journal of Colloid and Interface Science 2008, 323, 293-300.

de Hazan, Y./Werner, D./Zgraggen, M./Groteklaes, M./Graule, T. Homogeneous Ni-P/Al2O3 nanocomposite coatings from stable dispersions in electroless nickel baths. Journal of Colloid and Interface Science 2008, 328(1), 103-109.

Duszová, A./Dusza, J./Tomásek, K./Blugan, G./Kuebler, J. Microstructure and properties of carbon nanotube/zirconia composite. Journal of the European Ceramic Society 2008, 28(5), 1023-1027.

Duszová, A./Dusza, J./Tomásek, K./Morgiel, J./Blugan, G./Kuebler, J. Zirconia/carbon nanofiber composite. Scripta Materialia 2008, 58(6), 520-523.

Duval, S. Y-substituted barium zirconate, a proton conducting electrolyte for applications at intermediate temperatures. Dissertation, Technische Universität München, Lehrstuhl für Technische Physik, München, Deutschland, 2008, 138 pp.

Duval, S. B. C./Holtappels, P./Stimming, U./Graule, T. Effect of minor element addition on the electrical properties of BaZr0.9Y0.1O3 - d. Solid State Ionics 2008, 179(21-26), 1112-1115.

Graule, T. Nanovir - ein Virenfilter für sauberes Trinkwasser dank Nanotechnologie. VTA-aktuell 2008,(3), 26-27. /NR /123

Heiber, J./Belloli, A./Ermanni, P./Clemens, F. Ferroelectric characterization of single PZT fibers. Journal of Intelligent Material Systems and Structures 2008, 4 pp.

Heiber, J./Clemens, F./Graule, T./Hülsenberg, D. Influence of varying the powder loading content on the homogeneity and properties of extruded. PZT-fibers. 5th China International Conference on High-Performance Ceramics, High Performance Ceramics V, Chansha, China, May 10-13, 2007, 11-14.

Homma, S./Uoi, Y./Braun, A./Koga, J./Matsumoto, S. Reaction model for fluorination of uranium dioxide using improved unreacted shrinking core model for expanding spherical particles. Journal of Nuclear Science and Technology 2008, 45(8), 823-827.

Kozielski, L./Piechowiak, M./Czekaj, D./Lisinska-Czekaj, A./Smalarz, G./Clemens, F./Nowak, R. Mechanical examination of PZT microfibre defects structure. Phase Transitions 2008, 81(11-12), 1081-1088.

Kuebler, J./Eblagon, F./Graule, T./Ehrle, B. Development of ceramic composites for industrial wood-cutting tools. 5th China International Conference on High-Performance Ceramics, High Performance Ceramics V, Changsha, China, May 10-13, 2007, 1062-1067.

Manukyan, Kh V./Aydinyan, S. V./Kirakosyan, Kh G./Kharatyan, S. L./Blugan, G./Mu¨ller, U./Kuebler, J. Molten salt-assisted combustion synthesis and characterization of MoSi2 and MoSi2-Si3N4 composite powders. Chemical Engineering Journal 2008, 143(1-3), 331-336.

Mattmann, C./Clemens, F./Tröster, G. Sensor for measuring strain in textile. Sensors 2008, 8, 3719-3732.

Metin, H./Sat, F./Erat, S./Ari, M. Cadmium sulphide thin films grown by CBD: the effect of thermal annealing on the structural, electrical and optical properties. Journal Optoelectronics and Advanced MatMaterials 2008, 10(10), 2622-2630.

Michalow, K. A./Vital, A./Heel, A./Graule, T./Reifler, F. A./Ritter, A./Zakrzewska, K./Rekas, M. Photocatalytic activity of W-doped TiO2 nanopowders. Journal of Advanced Oxidation Technologies 2008, 11(1), 56-64.

Münch, B./Holzer, L. Contradicting geometrical concepts in pore size analysis attaines with electron microscopy and mercury intrusion. Journal of the American Ceramic Society 2008, 91(12), 4059-4067.

Orlovskaya, N./Lugovy, M./Pathak, S./Steinmetz, D./Lloyd, J./Fegely, L./Radovic, M./Payzant, E. A./Lara-Curzio, E./Allard, L. F./Kuebler, J. Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites. Journal of Power Sources 2008, 182, 230-239.

Orlovskaya, N./Yarmolenko, S./Sankar, J./Kuebler, J./Lugovy, M. Effects of rolling and hot pressing on mechanical properties of boron carbide-based ceramics. Journal of Materials Science 2008, 43(17), 5942-5947.

Richter, J. Mixed conducting ceramics for high temperature electrochemical devices. Dissertation, ETH Zurich, Empa Duebendorf Switzerland, Department for High Performance Ceramics, Switzerland, 2008, 111 pp.

Richter, J./Braun, A./Harvey, A. S./Holtappels, P./Graule, T./Gauckler, L. J. Valence changes of manganese and praseodymium in Pr1-xSrxMn1-yInyO3-d perovskites upon cation substitution as determined with XANES and ELNES. Physica B: Condensed Matter 2008, 403(1), 87-94.

Richter, J./Holtappels, P./Graule, T./Gauckler, L. J. Non-stoichiometry, thermal expansion and electrical properties of Pr1 - x Srx Mn1 - y InyO3 - d perovskites. Solid State Ionics 2008, 179(39), 2284-2289.

Ried, P./Holtappels, P./Wichser, A./Ulrich, A./Graule, T. Synthesis and Characterization of La0.6Sr0.4Co0.2Fe0.8O3-d and Ba0.5Sr0.5Co0.8Fe0.2O3-d. Journal of The Electrochemical Society 2008, 155(10), B1029-B1035.

Ried, P./Lorenz, C./Brönstrup, A./Graule, T./Menzler, N. H./Sitte, W./Holtappels, P. Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC. Journal of the European Ceramic Society 2008, 28(9), 1801-1808.

Rothmaier, M./Luong, M. P./Clemens, F. Textile pressure sensor made of flexible plastic optical fibers. Sensors 2008, 8(7), 4318-4329.

Vasic, S./Grobéty, B./Kuebler, J./Kern, P./Graule, T. Experimental models for activtation mechanism of pressureless infiltration in the non-wetting steel-alumina MMC system. Advanced Engineering Materials 2008, 10(5), 471-475.

Vaucher, S./Kuebler, J./Beffort, O./Biasetto, L./Zordan, F./Colombo, P. Ceramic foam-reinforced Al-based micro-composites. Composites Science and Technology 2008, 68(15-16), 3202-3207.

Vital, A./Zürcher, S./Dittmann, R./Trottmann, M./Lienemann, P./Bommer, B./Graule, T./Apel, E./Ho¨land, W. Ultrafine comminution of dental glass in a stirred media mill. Chemical Engineering Science 2008, 63(2), 484-494.

Vogt, U./Sfeir, J./Richter, J./Soltmann, C./Holtappels, P. B-site substituted lanthanum strontium ferrites as electrode materials for electrochemical applications. Pure and Applied Chemistry 2008, 80(11), 2543-2552.

Wegmann, M./Michen, B./Graule, T. Nanostructured surface modification of microporous ceramics for efficient virus filtration. Journal of the European Ceramic Society 2008, 28(8), 1603-1612.

Wegmann, M./Michen, B./Luxbacher, T./Fritsch, J./Graule, T. Modification of ceramic microfilters with colloidal zirconia to promote the adsorption of viruses from water. Water Research 2008, 42(6-7), 1726-1734.

Wittig, D./Glauche, A./Aneziris, C. G./Minghetti, T./Schelle, C./Graule, T./Kuebler, J. Activated pressureless melt infiltration of zirconia-based metal matrix composites. Materials Science and Engineering: A, 2008, 488(1-2), 580-585.

Publications 2007

Akurati K.K., Vital A., Hany R., Nueesch F., Graule T., Winterer M., Flame synthesis of TiO2 nanoparticles with high photocatalytic activity, Solid State Sciences, 9 (2007) 247-257

Barna E., Reutsch D., Bommer B., Vital A., von Trzebiatowski O., Graule Th., Surface Modification of Nanoparticles for Scratch Resistant Clear Coatings, KGK - Kautschuk  Gummi  Kunststoffe, 1-2 07, 49-51

Bayraktar D., Clemens F., Diethelm S., Graule T., Van herle J., Holtappels P.,  Production and properties of substituted LaFeO3-perovskite tubular membranes for partial oxidation of methane to syngas, Journal of the European Ceramic Society 27 (2007) 2455-2461

Braun A., Mun, B.S., Huggins F.E., Huffman G.P., Carbon speciation of diesel exhaust and urban particulate matter NIST standard reference materials with C (1s) NEXAFS spectroscopy,  Environmental Science & Technology, 41 (2007) 173-178

Braun A., Wang H., Shim J.-P-, Cairns, E.J., Lithium K (1s) NEXAFS spectra of lithium ion battery cathode, anode and electrolyte materials, Journal of Power Sources 170 (2007) 173-178

Beffort O., Long S., Cayron C., Kuebler J., Buffat P.-A., Alloying effects on microstructure and mechanical properties of high volume fraction SiC-particle reinforced Al-MMCs made by pressare infiltration, Composites Science and Technology, 67 (2007), 737-745

Blugan G., Kuebler J., Bissig V., Janczak-Rusch J., Brazing of silicon nitride ceramic composite to steel using SiC particle reinforced active brazing alloy , Ceramics Inter-national , 33 (2007) 1033-1039

Blugan G., Morawa K., Koebel S., Graule T., Kuebler J., Development of a Tape Casting Process for Making Thin Layers of Si3N4 and Si3N4 + TiN, Journal of the European Ceramic Society, 27 (2007) 4789-4795

Bruehlmann, S./Novak, P./Lienemann, P./Trottmann, M./Gfeller, U./Zwicky, C. N./Bommer, B./Huber, H./Wolfensberger, M./Heeb, N. V., Three-way-catalyst induced benzene formation: A precursor study. Applied Catalysis B: Environmental 2007, 70(1-4), 276-283

Clemens F.J., Wallquist V., Buchser W., Wegmann M., Graule T. Silicon carbide fiber-shaped microtools by extrusion and sintering SiC with and without carbon powder sintering additive,  Ceramics International, 33 (2007) 491-496

Clemens F., Wegmann M., et.al., Electronically Functional Fibre Technology Development for Ambient Intelligence, Buch Springer Verlag, LNCS Series, Part IV, Augment-ing Physical Artefacts, “The Disappearing Computer”, ISBN 978-3-540-72725-5, May 9, 2007

Clemens F.J., Händle F. (Ed), Book: Extrusion in Ceramics; Chapter 17: Thermoplastic extrusion for ceramic bodies, Springer Verlag, ISBN 3-540-27100-0,pp 323-344

Clemens, F./Heiber, J./Ismael, M. R./Paradies, R./Graule, T. J./Piechowiak, M./Kozielsk, L./Czekaj, D., The influence of the sintering atmosphere and the fibre geometry on the piezoelectric properties of PZT single fibres and AFC structures. International Symposium on Piezocomposite Applications (ISPA 2007), Dresden, Germany, September 27-28, 2007, 10 pp

Eblagon, F., Ehrle B., Graule T., Kübler J., Development of silicon nitride/silicon carbide composites for wood cutting tools, Journal of the European Ceramic Society, 2007, 27, 419-428

Farshard, M., Le Roux M., Clemens F., Magnetoactive Polymer Composite Fibers  and Fabrics - Processing and Mechanical Characterisation, Journal of  Thermoplastic Composite Materials, Vol. 20, 2007, 65-74

Guo, Z., Blugan G., Graule T., Reece, M., Kuebler J., The effect of different sintering additives on the electrical and oxidation properties of  Si3N4-MoSi2 composites, Journal of the European Ceramic Society, 27 (2007) 2153-2161

Guo Z., Parlinska-Wojtan M., Blugan G., Graule T., Reece M., Kuebler J.,The influence of the grain boundary phase on the mechanical properties of  Si3N4-MoSi2 composites, Acta Materialia 55 (2007) 2875-2884

Guo Z., Blugan G., Kirchner R., Reece M., Graule T., Kübler J.,Microstructure and Electrical Properties of Si3N4/TiN Composites Sintered by Hot Pressing and Spark Plasma Sintering, Ceramics International, 33 (2007) 1223-1229

Guo Z., Development of Si3N4-based composites for high temperature sensor application,  Dissertation, University of London, UK, 2007, 165 pp

Heiber J., Clemens F., Helbig U., de Meuron A., Soltmann Ch., Graule T., Hülsenberg D., Properties of Pb(Zr,Ti)O3 fibres with a radial gradient structure, Acta Materialia, 55 (2007) 6499-6506

Heiber J., Einige Möglichkeiten zur Beeinflussung der Struktur und der Eigenschaften von PZT-Keramik-Fasern, Dissertation, Technische Universität Ilmenau, Germany, 2007, 172 pp

Herzog A., Woetting G., Vogt U., Short-Fibre Reinforced Reaction-Bonded Silicon Nitride (RBSN) by Precursor Route, Processing and Properties, Journal of the European Ceramic Society, 27 (2007) 3561-3572

Holzer, L./Gasser, P./Käch, A./Wegmann, M./Zingg, A./Wepf, R./Münch, B., Cryo-FIB-nanotomography for quantitative analysis of particle structures in cement suspensions. Journal of Microscopy 2007, 227(3), 216-228

Katsikis N., Zahradnik F., Helmschrott A., Münstedt H., Vital A., Thermal stability of poly(methyl methacrylate)/silica nano and microcomposites as investigated by dynamic-mechanical experiments, Polymer Degradation and Stability, 2007, 92 1966-1976

Kübler J., Blugan G., Lugovy M., Slyunyayev V., Orlovskaya N., Dobedoe R., Development of Failure Tolerant Multi-layer Silicon Nitrice Ceramics: Review from Macro to Micro Layered Structures, Key Engineering Materials, Vol 333, (2007), 117-126

Kübler J., Blugan G., Jelitto H., Schneider G.A., Dobedoe R., Structural Micro-layered Ceramics with Surfaces under Tension and Compression with Increasing Apparent Fracture Toughness, Key Engineering Materials, Vols. 336-338 (2007), pp 2564-2568

Lemster K., Delporte M., Graule T., Kübler J., Activation of alumina foams for fabricating MMCs by pressureless infiltration, Ceramics International, 33 (2007) 1179-1185

Mach A, Herzog A., v. Issendorff F., Kanka B., Krieger R., Mössbauer S., Orton A., Pritzkow W., Schäfer J., Schmidt J., Schmücker M., Schneider  H., Star J., Trimis D., Vogt U, zur Megede D., Cerpor Project: Optimization of ceramic components for the porous burner technology, Interceram  Refractories Manual 2006 pp 48-54

Manukyan Kh.V., Kharatyan S.L., Blugan G., Kuebler J., Combustion Synthesis and Compaction of SI3N4-TiN Composite Powder, Ceramics International, 33 (2007) 379-383

Reifler, F. A./Ritter, A./Fortunato, G./Vital, A./Akurati, K. K./Hufenus, R., Towards a photocatalytic fiber for degradation of malodor. Davis, CA, 9-11th October, 2007, 2 pp

Rosten, R., Swanson, M., Kuebler, J., Kapat, J., Orlovskaya, N., Characterization of (La0.9Sr0.1)0.95Cr0.85Mg0.1Ni0.05O3 perovskite ceramics for a perovskite related membrane reactor, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc.  Symp. Proc.972, Warrendale, PA, 2007), 0972-AA02-07

Tangtrakarn, N., Swanson, M., Moran, P., Kuebler, J., Kapat, J., Orlovskaya, N., Sintering behaviour and phase characterization of composite perovskite/fluorite ceramics for Intermediate temperature SOFCs and oxygen separation membranes, in Solid-State Ionics, edited by E. Traversa, T. Armstrong, C. Masquelier, and Y. Sadaoka (Mater. Res. Soc. Symp. Proc.972, Warrendale, PA, 2007), 0972-AA03-07

Thu&#776;nemann, M./Beffort, O./Kleiner, S./Vogt, U., Aluminum matrix composites based on preceramic-polymer-bonded SiC preforms. Composites Science and Technology 2007, 67(11-12), 2377-2383

Vasic, S., Grobety, B., Kuebler, J., Graule, T., Baumgartner, L., X-Ray CT as Complementary Method for the Characterisation of Activated Porous Ceramic Preforms, Journal of Materials Research, Vol. 22, No. 5, May 2007, 1414-1424

Vital A., Angermann A., Dittmann R., Graule T., Töpfer J., Highly Sinter-Active (Mg-Zu)-Zn Ferrite Nanoparticles prepared by Flame Spray Synthesis, Acta Materialia, 55 (2007) 1955-1964

Vital A., Richter J., Figi R., Nagel O., Aneziris C.G., Bernardi J., Graule T., One-step flame synthesis of ultrafine SiO2-C nanocomposite particles with high carbon loading and their carbothermal conversion, Industrial & Engineering Chemistry Research 2007, 46, 4273-4281

Vogt U.F., Györfy L., Herzog A., Graule T., Plesch G., Macroporous silicon carbide foams for porous burner applicatios and catalyst supports, Journal of Physics and Chemistry of Solids, 68 (2007) 234-1238

Wegmann M., Brönnimann R., Clemens F., Graule T., Barium Titanate-Based PTCR Thermistor Fibers: Processing and properties, Sensors and Actuators, A-Physical, 135 (2007) 394-404

Allgemein
Verjüngungskur für Brennstoffzellen Energeia, Newsletter des Bundesamtes für Energie, BFE, Ausgabe 3, Juni 07

Publications 2006

Akurati, K. K./Dittmann, R./Vital, A./Klotz, U./Hug, P./Graule, T. J./Winterer, M. Silica-based composite and mixed-oxide nanoparticles from atmospheric pressure flame synthesis. Journal of Nanoparticle Research 2006, 8(3-4), 379-393

Akurati, K. K./Vital, A./Klotz, U. E./Bommer, B./Graule, T. J./Winterer, M. Synthesis of non-aggregated titania nanoparticles in atmospheric pressure diffusion flames. Powder Technology 2006, 165(2), 73-82

Bayraktar, D./Diethelm, S./Holtappels, P./Graule, T. J./Van Herle, J. Oxygen transport in La0.5Sr0.5Fe1-yTiyO3-delta (y=0.0, 0.2) membranes. Journal of Solid State Electrochemistry 2006, 10(8), 589-596

Blugan, G./Dobedoe, R. S./Lugovy, M./Köbel, S./Kübler, J. Si3N4-TiN based micro-laminates with rising R-curve behaviour. Composites Part B: Engineering 2006, 37(6), 459-465

Braun, A. Comment on "Studies on nanoporous glassy carbon as a new electrochemical capacitor material [Y. Wen, G. Cao, Y. Yang, J. Power Sources 148 (2005) 121-128]. Journal of Power Sources 2006, 160(1), 762-763

Braun, A. Quantitative model for anisotropy and reorientation thickness of the magnetic moment in thin epi-taxially strained metal films. Physica B-Condensed Matter 2006, 373(2), 346-354

Braun, A. Some comments on "Soot surface area evolution during air oxidation as evaluated by small angle X-ray scattering and CO2 adsorption". Carbon 2006, 44(7), 1313-1315

Braun, A./Huggins, F. E./Kelly, K. E./Mun, B. S./Ehrlich, S. N./Huffman, G. P. Impact of ferrocene on the structure of diesel exhaust soot as probed with wide-angle X-ray scattering and C(1s) NEXAFS spectrosco-py. Carbon 2006, 44(14), 2904-2911

Braun, A./Wirick, A./Kuba´tova´, A./Mun, B. S./Huggins, F. E. Photochemically induced decarboxylation in diesel soot extracts. Atmospheric Environment 2006, 40(30), 5837-5844

Dumont, T./Lippert, T./Döbeli, M./Grimmer, H./Ufheil, J./Novak, P./Würsig, A./Vogt, U./Wokaun, A. In-fluence of experimental parameters on the Li-content of LiMn2O4 electrodes produced by pulsed laser de-position. Applied Surface Science 2006, 252(13), 4902-4906

Hammes, K./Smernik, R. J./Skjemstad, J. O./Herzog, A./Vogt, U. F./Schmidt, M. W. I.  Synthesis and cha-racterisation of laboratory-charred grass straw (Oryza sativa) and chestnut wood (Castanea sativa) as refe-rence materials for black carbon quantification. Organic Geochemistry 2006, 37(11), 1629-1633

Hadad, M./Blugan, G./Kübler, J./Rosset, E./Rohr, L./Michler, J. Tribological behaviour Of Si3N4 and Si3N4-%TiN based composites and multi-layer laminates. Wear 2006, 260(6), 634-641

Heiber, J./Clemens, F./Graule, T. J./Hülsenberg, D. Influence of the fibre diameter on the microstructure and the piezoelectric properties of PZT-fibres. Advances in Science and Technology 2006, 45, 2459-2463

Herzog, A./Reznik, B./Chen, T. F./Graule, T. J./Vogt, U. Structural changes in activated wood-based car-bons: correlation between specific surface area and localization of molecular-sized pores. Holzforschung 2006, 60(1), 85-92

Herzog, A./Vogt, U. F./Siegmann, S./Beffort, O. Aluminium metal matrix composites based on biomorphic silicon carbide. Advanced Engineering Materials 2006, 8(10), 980-983

Herzog, A./Vogt, U./Kaczmarek, O./Klingner, R./Richter, K./Thoemen, H. Porous SiC ceramics deri-ved from tailored wood-based fiberboards. Journal of the American Ceramic Society 2006, 89(5), 1499-1503

Holtappels, P./Mehling, H./Roehlich, S./Liebermann, S. S./Stimming, U. SOFC system operating strategies for mobile applications. Fuel Cells 2005, 5(4), 499-508

Holtappels, P./Sorof, C./Verbraeken, M. C./Rambert, S./Vogt, U. Preparation of porosity-graded SOFC anode substrates. Fuel Cells 2006, 6(2), 113-116

Holtappels, P./Verbraeken, M. C./Vogt, U./Blank, D. H. A./Boukamp, B. A. Preparation and electro-chemical characterisation of supporting SOFC-Ni-YZT anodes. Solid State Ionics 2006, 177(19-25 SPEC. ISS.), 2029-2032

Holtappels, P./Verbraeken, M.//Blank, D. H. A./Boukamp, B. A. SOFC-anodes, proof for a finite-length type Gerischer impedance?

Holzer, L./Münch, B./Wegmann, M./Gasser, P./Flatt, R. J. FIB-Nanotomography of particulate systems - Part I: Particle shape and topology of interfaces. Journal of the American Ceramic Society 2006, 89(8), 2577-2585

Lemster, K./Graule, T. J./Minghetti, T./Schelle, C./Kübler, J. Mechanical and machining properties of X38CrMoV5-1/Al2O3 metal matrix composites and components. Materials Science & Engineering A 2006, 420(1-2), 296-305

Orlovskaya, N./Lugovy, M./Ko, F./Yarmolenko, S./Sankar, J./Kübler, J. SiC/SiCwoven (fabric) laminates: Design, manufacturing, mechanical properties. Composites Part B: Engineering 2006, 37(6), 524-529

Orlovskaya, N./Lugovy, M./Kübler, J./Yarmolenko, S./ Sankar, J. Design of tough ceramic laminates by residual stresses control. In: Low, J. (Ed.), Ceramic-matrix composites: Microstructure/property relations-hip, , Woodhead Publishing Limited, Abington, UK, 2006, 178-215

Richter, J./Holtappels, P./Vogt, U./Graule, T./Gauckler, L. J.  Conduction behavior of Pr1-xSrxMn1-yInyO3-d perovskites. Solid State Ionics 2006, 177(35-36), 3105-3108

Wegmann, M./Clemens, F./Hendry, A./Graule, T. J. Dispersion of lanthanoid-coated barium titanate in a paraffin-based extrusion binder system. Ceramics International 2006, 32(2), 147-156










 

Publications 2005

Akurati, K.K./Vital, A./Hany, R./Bommer, B./Graule, T.J./Winterer, M. One-step flame synthesis of SnO2/TiO2 composite  nanoparticles for photocatalytic applications. International journal of photoenergy 2005, 7(4), 153-161

Barbieri, O./Hahn, M./Herzog, A./Koetz, R. Capacitance limits of high surface area activated carbons for  double layer capacitors. Carbon 2005, 43(5), 1303-1310
Barna, E. /Bommer, B. /Kuersteiner, J./Vital, A./Von Trzebiatowski, O./Koch, W./Schmid, B. /Graule, T.J. Innovative, scratch proof nanocomposites for clear coatings. Composites Part A, 2005, 36(4), 473-480

Blugan, G./Orlovskaya, N. /Lewis, M. /Kuebler, J. Multi-layer silicon nitride laminates exhibiting high fracture  toughness and crack deflection.
Key engineering materials 2005, 280-283, 1863-1868

Blugan, G./Hadad, M./Janczak-Rusch, J./Kuebler, J./Graule, T.J. Fractography, mechanical properties, and microstructure of  commercial silicon nitride-titanium nitride composites. Journal of the american ceramic society 2005, 88(4), 926-933

Blugan, G./Dobedoe, R.S./Gee, I./Orlovskaya, N./Kuebler, J. Failure behaviour of high toughness multi-layer Si3N4 and Si3N4- TiN based laminates.
Key engineering materials 2005, 290, 175-182

Clemens, F. Kleider mutieren zu Computern. Swiss engineering 1005, 102(5), 2-3

Dittmann, R./Richter, J./Vital, A./Piazza, D./Aneziris, Ch./Graule, T.J. Influence of burner scale-up on characteristics of flame- synthesized titania and silica nanoparticles.  Advanced engineering materials 2005, 7(5), 354-360

Farshad, M./Luebben, J.F./Halbeisen, M./Hufenus, R./Le Roux, M./Clemens, F. Magnetostrictive polymer composite fibers. In: 5th Int. conference on intelligent processing and manufacturing of materials (IPMM'05), Monterey, CA, USA, July 19-23, 2005

Gee, I.A./Dobedoe, R.S./Vann, R./Lewis, M.H./Blugan, G./Kuebler, J. Enhanced fracture toughness by ceramic laminate design. Advances in applied ceramics 2005, 104(3), 103-109

Graule, T.J./Barna, E./Bommer, B./K?rsteiner, J./Vital, A./Von Trzebiatowski, O./Schmid, B. /Van Leeuwen, J. /Koch, W. Synthesis of spherical, non-aggregated silica nanoparticles for  nanocomposites coatings.  KGK Kautschuk Gummi Kunststoffe 2005, 58(5), 252-255

Heiber, J./Clemens, F./Graule, T.J./Huelsenberg, D. Thermoplastic extrusion to highly-loaded thin green fibres  containing Pb(Zr,Ti)O3. Advanced engineering materials 2005, 7(5), 404-408

Herzog, A./Thünemann, M. /Vogt, U./Beffort, O. Novel application of ceramic precursors for the fabrication of  composites. Journal of the european ceramic society 2005, 25(2-3), 187-192

Holtappels, P./Vogt, U./Graule, T.J. Ceramic materials for advanced solid oxide fuel cells. Advanced engineering materials 2005, 7(5), 292-298

Kuebler, J./Baechtold, R. /Blugan, G./Lemster, K./Fuso, S. Failure analysis on a De-NOx catalyst  of a large waste burner. Key engineering materials 2005, 290, 78-85

Kuersteiner, J./Bommer, B./Barna, E./Vital, A./Von Trzebiatowski, O./Graule, T.J./Koch, W./Schmid, B. Kratzfeste Klarlacke mit nanoskaligem Siliziumoxyd. Bautenschutz 2005, (1), 18-23; 2005, (4), 14-19

Lemster, K./Graule, T.J./Kübler, J. Processing and microstructure of metal matrix composites prepared by pressureless Ti-activated infiltration using Fe-base  and Ni-base alloys. Materials science and engineering A 2005, 393(1-2), 229-238

Lugovy, M./Slyunyayev, V./Orlovskaya, N./Blugan, G./Kübler, J./Lewis, M. Apparent fracture toughness of Si3N4-based laminates with  residual compressive or tensile stresses in surface layers. Acta materialia 2005, 53(2), 289-296

Moser, B./Kübler, J./Meinhard, H./Muster, W./Michler, J. Observation of instabilities during plastic deformation by in-situ  SEM indentation experiments.
Advanced engineering materials 2005, 7(5), 388-392

Orlovskaya, N./Kuebler, J./Subbotin, V./Lugovy, M. Design of Si3N4-based ceramic laminates by the residual  stresses. Journal of materials science 2005, 40(20), 5443-5450

Sfeir, J./Vaucher, S./Holtappels, P./Vogt, U./Schindler, H.J./Van Herle, J./Suvorova, E./Buffat, Ph.-A./Perret, D./Xanthopoulos, N./Bucheli, O. Characterization of perovskite powders for cathode and oxygen  membranes made by different synthesis routes. Journal of the european ceramic society 2005, 25(12), 1991-1995

Thuenemann, M. /Beffort, O./Kleiner, S./Vogt, U. Effect of processing method on properties of preceramic polymer- bound SiC
preforms and Al-based MMCs. Cfi-Ceramic forum international 2005, 82(13), 240-244

Verbraeken, M.C./Boukamp, B.A./Blank, D.H.A./Holtappels, P./Vogt, U. Electrochemical characterisation of supporting SOFC anodes. In: Ninth int. symposium on solid oxide fuel cells (SOFC-IX),  Canada, Quebec, May 15-20, 2005, vol. 2, p.1218-1225

Vogt, U./Broenstrup, A./Thuenemann, M. /Durisch, W./Tobler, W./Graule, T.J. Poroese Yb2O3 Keramikemitter fuer die Thermophotovoltaik.
Cfi-Ceramic forum international 2005, 82(13), 231-234

Wegmann, M./Heiber, J./Clemens, F./Graule, T.J./Huelsenberg, D./Schuster, K. Forming of noncircular cross-section SiO2 glass fibers. Glass science and technology 2005, 78(2), 69-75

Zürcher, S./Graule, T.J. Influence of dispersant structure on the rheological properties of  highly-concentrated zirconia dispersions. Journal of the european ceramic society 2005, 25(6), 863-873

zurück  Links  Artikel versenden  Druckansicht