empa.ch
Empa in Profile
Departments and Labs
Empa Academy
Research areas
Portal for the industry
Services @ Empa
Work @ Empa
Education @ Empa
Mediacorner

YouTube
Twitter flickr
XING facebook Linkedin
AppStore
GooglePlay

Improving indoor climate, reducing energy consumption03 February 2014
Moisture-buffering plaster «sucks up» water vapour
Water vapour generated by cooking, taking a shower or drying damp clothes can condense on cold walls, encouraging the growth of mildew and microbes. The company Sto AG, in collaboration with Empa, has developed a special wall plaster to deal with this problem. Its ability to absorb moisture from the air is significantly better than that of conventional lime plaster.
Empa researcher Thomas Stahl developed the new buffering plaster together with Sto AG.

The new wall plaster that Empa building physicist Thomas Stahl was looking for needed to be humidity regulating, mineral-based, easy to use and not much more expensive than alternative products. The newly developed moisture-buffering plaster can in fact absorb 90 g of water vapour per square meter, measured by the standardized «Nordtest» method. This exceeds the capacity of the best clay rendering, measured for comparison purposes, by about 30 per cent.

No more condensing water on thermal bridges
The health and economic advantages offered by a relatively stable air humidity are enormous. Occupants and furnishings are less stressed, and energy consumption (and therefore heating costs) drops because dry air can be brought to a comfortable room temperature more quickly.
In order to achieve the required level of humidity storage capacity, the moisture-buffering plaster has to be applied with a thickness of 1 to 2 cm. This significantly reduces the risk of water vapour condensing on cold areas of the wall and on thermal bridges. The moisture absorbing plaster draws in the excess humidity from the room air and stores it, releasing it back to the environment hours later. The room - for example a windowless bathroom - only need be aired and then warmed up again.


The moisture absorbing capacity of the novel Empa rendering system in comparison with competing products – the so-called «Nordtest».

New range of products thanks to Empa innovation
Sto AG has created an entire range of indoor rendering products based on the Empa innovation, which it called «StoCalce Functio». The range includes a regulating base layer, a functional filling layer and two finishing coatings. These mineral-based products unite the positive characteristics of lime and clay renderings – in combination they absorb more than twice as much moisture as conventional lime-based plasters and about 50 per cent more than clay renderings. In addition, the environmentally friendly material is water resistant and hard wearing, as well as being easy to handle and use.


Information on the new moisture buffering plaster can be found (in German) here: http://www.Sto.de



Further Information

  • Thomas Stahl
    Empa, Building Technologies Laboratory
    Tel. +41 58 765 4626
    thomas.stahl@empa.ch
  • Dr. Michael Holzer
    Sto AG, Product Development - Mineral-based Products
    Tel. +49 77 44 57 10 10
    m.holzer@sto.com


Editor / Media contact


back  Links  Send article  print view