| Peer reviewed Journals |
 |
| 2006 |
|
- Fatigue strength of carbon fibre composites up to the gigacycle regime (gigacycle-composites)
Michel, S.A./Kieselbach, R./Martens, H.J.
International Journal of Fatigue 28, 2006, pp. 261-270
- A Comparison of Dynamic Piezoactuation of Fiber-based Actuators and Conventional PZT Patches
Nguyen, C.H./Kornmann, X.
Journal of Intelligent Material Systems and Structures 17, January 2006, pp. 45-55
- Performance of integrated active fiber composites in fiber reinforced epoxy laminates
Melnykowycz, M./Kornmann, X./Huber, Ch./Barbezat, M./Brunner, A.J.
Smart Materials and Structures 15, 2006, pp. 204-212
- Calculating a damage parameter and bridging stress from GIC delamination tests on fibre composite
Brunner, A.J./Blackman, B.R.K./Williams, J.G.
Composites Science and Technology, Vol. 66, 2006, pp. 785-795
- Analysis of track rope damage in serious incident on Schilthorn aerial ropeway
Zgraggen, M./Piskoty, G./Faller, M./Kovacs, G./Rössler, G./Michel, S./Oplatka, G./v. Trzebiatowski, O.
Materials and Corrosion 2006, Vol. 57, No. 7, pp. 549-554
- Specimen length on parameter estimation in modelling fatigue strength by Weibull distribution
Castillo, E./López-Aenlle, M./Ramos, A./Fernández-Canteli, A./Kieselbach, R./Esslinger, V.
International Journal of Fatigue 2006, Vol. 28, pp. 1047-1058
- New Automated Long-term Extrapolation Method for Plastic Pipes under Hydrostatic Pressure
Farshad, M.
Journal of Thermoplastic Composite Materials 2006, Vol. 19, No. 5
- Analysis of track rope damage in serious incident on Schilthorn aerial ropeway
Zgraggen, M./Piskoty, G./Faller, M./Kovacs, G./Rössler, G./Michel, S./Oplatka, G./v. Trzebiatowski, O.
Materials and Corrosion 2006, Vol. 57, No. 7, pp. 549-554
- Specimen length on parameter estimation in modelling fatigue strength by Weibull distribution
Castillo, E./López-Aenlle, M./Ramos, A./Fernández-Canteli, A./Kieselbach, R./Esslinger, V.
International Journal of Fatigue 2006, Vol. 28, pp. 1047-1058
- New Automated Long-term Extrapolation Method for Plastic Pipes under Hydrostatic Pressure
Farshad, M.
Journal of Thermoplastic Composite Materials 2006, Vol. 19, No. 5
- The influence of silicate-based nano-filler on the fracture toughness of epoxy resin
Brunner, A.J./Necola, A./Rees, M./Gasser, Ph./Kornmann, X./Thomann, R./Barbezat, M.
Engineering Fracture Mechanics, Vol. 73, 2006, pp. 2336-2345
- Mode II fracture testing of composite: a new look at an old problem
Blackmann, B.R:K./Brunner, A.J./Williams, J.G.
Engineering Fracture Mechanics, Vol. 73, 2006, pp. 2443-2455
|
|
| 2005 |
|
- The potential of active fiber composites made from piezoelectric fibers for actuating and sensing applications in structural health monitoring
Brunner, A. J./ Barbezat, M./ Huber, Ch./ Flüeler, P.H.
Journal Materials and Structures 38, June 2005, pp. 561 - 567
- Dielectric Elastomer in Actuator Technology
Zhang, X./ Löwe, Ch./ Wissler, M./ Jähne, B./ Kovacs, G.
Journal Advanced Engineering Materials, 7, No. 5, 2005, pp. 361 - 367
- Model for interlaminar normal stress in singly curved laminates
Kress, G./ Roos, R./ Barbezat, M./ Dransfeld, C./ Ermanni, P.
Journal Composite Structures 69, 2005, pp. 458 – 469
- Prospects in Fracture Mechanics of 'Engineering' Laminates
Brunner A.J./ Flüeler, P.
Journal Engineering Fracture Mechanics, 72, No. 6, 2005, pp. 899-908
- Strain energy density as a rupture criterion for the kidney: impact tests on porcine organs, finite element simulation, and a baseline comparison between human and porcine tissues
Snedeker, J.G./ Barbezat, M./ Niederer, P./ Schmidlin, F.R./ Farshad, M.
Journal of Biomechanics 38, 2005, pp. 993 – 1001
- Strain-rate dependent material properties of the porcine and human kidney capsule
Snedeker, J.G./ Niederer, P./ Schmidlin, F.R./ Farshad, M./ Demetropoulos, C.K./ Lee, J.B./ Yang, K.H.
Journal of Biomechanics 38, 2005, pp. 1011 – 1021
- Modeling of a pre-strained circular actuator made of dielectric elastomers
Wissler, M./ Mazza, E.
Journal Sensors and Actuators A 120, 2005, pp. 184 – 192
- Bursting of a corn silo - An interdisciplinary failure analysis
Piskoty, G./Michel, S.A./Zgraggen, M.
Engineering Failure Analysis, Vol. 12, 2005, pp. 915-929
- Investigation into an accident caused by falling formwork using numerical dynamic simulation
Piskoty, G./Kovacs, G./Affolter, Ch.
Engineering Failure Analysis, Vol. 12, 2005, pp. 942-949
- Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites
Kornmann, X./Rees, M./Thomann, Y./Necola, A./Barbezat, M./Thomann, R.
Composites Science and Technology, Vol. 65, 2005, pp. 2259-2268
- Environmental and frequency effects on fatigue crack growth rate and paths in aluminium alloy
Michel, S.A./Kieselbach, R./Figliolino, M.
Fatigue Fracture Engineering Material Structures Vol. 28, 2005, pp. 205-219
Size Effect in Strain Limits of Medium Strength Steel
Kieselbach, R./Krieg, R.
Journal of Testing and Evaluation, Vol. 33, No. 5, September 2005
- Schadenanalyse an einer gebrochenen Hebevorrichtung / Failure Analysis on a Broken Lifting Device
Zgraggen, M./Piskoty, G./Winkler, R./Trüllinger, S./v. Trzebiatowski, O.
Praktische Metallografie, Vol. 42, No. 6, 2005, pp. 304-317
- Modeling and simulation of dielectric elastomer actuators
Wissler, M./Mazza, E.
Smart Materials and Structures, Vol. 14, No. 6, December 2005, pp. 1396-1402
- Fatigue strength of carbon fibre composites up to the gigacycle regime (gigacycle-composites)
Michel, S.A./Kieselbach, R./Martens, H.J.
International Journal of Fatigue, Vol. 28, 2005, pp. 261-270
- Determination of the long-term hydrostatic strength of mulitlayer pipes
Farshad, M.
Polymer Testing, Vol. 24, Nr. 8, December 2005, pp. 1041-1048
- Compression properties of magnetostrictive polymer composite gels
Farshad, M./Le Roux, M.
Polymer Testing, Vol. 24, 2005, pp. 163-168
- Long-term extrapolation of properties of polymeric waterproofing membranes
Farshad, M./Bianchi, S./Löwe, Ch.
Materials and Structures, Vol. 38, June 2005, pp. 557-560 |
|
| 2004 |
|
- Two new criteria for the service life prediction of plastics pipes
Farshad, M.
Journal Polymer Testing 23, 2004, pp. 967 - 972
- A new active noise abatement barrier system
Farshad, M./ Le Roux, M.
Journal Polymer Testing 23, 2004, pp. 855 - 860
- Microstructure and mechanical properties of PZT Fibres
Kornmann, X./ Huber, C
Journal of the European Ceramic Society 24,2004 , pp. 1987 - 1991
- Strain corrosion of glass fibre-reinforced plastics pipes
Farshad, M./ Necola, A.
Journal Polymer Testing 23, 2004, pp. 517 - 521
- Acoustic emission sensor properties of active fibre composite elements compared with commercial acoustic emission sensors
Barbezat, M./ Brunner, A. J./ Flüeler, P./ Huber, C./ Kornmann, X.
Journal Sensors and Actuators A 114 (2004) pp. 13 - 20
- Magnetoactive elastomer composites
Farshad, M./ Benine, A.
Journal Polymer Testing 23, 2004, pp. 347 - 353
- Effect of aqueous environment on the long-term behaviour of glass fiber-reinforced plastic pipes
Farshad, M./ Necola, A.
Journal Polymer Testing 23, 2004, pp. 163 - 167
- Drainage behaviour of two-layered water-sealing polymeric systems
Farshad, M./ Flüeler, P.
Journal Polymer Testing 23, 2004, pp. 43 - 49
- DEVELOPMENT OF A SENSOR FOR DETECTING OPERATING LOADS ON A SINGLE-DRUM COMPACTOR
PART II: SERVICE LOAD MEASUREMENTS
Stutz, A./ Koller, R./ Soyka, G./ Kieselbach, R./ Hofmann, R.
Journal Experimental Techinques, November/ December 2004, pp. 41 - 45
- DEVELEOPMENT OF A SENSOR FOR DETECTING OPERATING LOADS ON A SINGL-DRUM COMPACTOR
PART I: SENSOR LAYOUT
Stutz, A/ Koller, R./ Soyka, G./ Kieselbach, R./ Hofmann, R.
Journal EXPERIMENTAL TECHNIQUES, September/ October 2004, pp. 38 – 42
- The railway accident of Eschede – technical background
Esslinger, V./ Kieselbach, R./ Koller, R./ Weisse, B.
Journal Engineering Failure Analysis II, 2004, pp. 515 – 535
- Curious cases of failure
Kieselbach, R.
Journal Engineering Failure Analysis II, 2004, pp. 501 – 513
|
|
| |
|
back
Links
Send article
print view